CA Partial part of 1971 GMC 1 TON 2WD Cab and Chassie

[dbash]

Originally Posted by 71 GMCDRVR

I am also interested in the grille let me know if shawno passes!!!! ANd is that 50 for the whole grille assembly? (grille, eye brow trim, and headlight buckets?)

You still picking this up this weekend GMCDRVR?
Posted via Mobile Device

[dbash]

Originally Posted by davestrucks

rear brake drums.

the rear brake drums were removed this afternoon they have a lot of life left in them after seeing them and the front rotors I am starting to believe the PO that the 58 thousand miles were original.

They weigh 53 lbs and I am guessing the shipping to co will be 30 bucks each but I dont have your zip so I am not sure.

I offered them to you at 25 bucks each. Please let me know if you want them.
Posted via Mobile Device

[71 GMCDRVR]

Originally Posted by dbash

You still picking this up this weekend GMCDRVR?
Posted via Mobile Device

Yessir Be out saturday around 10 or so. Sorry I havn't called yet been a busy week!!

[Shaun1162]

Originally Posted by dbash

Shaun1162 The Carrier Bearing Crossmember (is a pain to remove but its done :-)) weighs 26 lbs and shipping is $30. That brings your total to $80 for UPS Ground.

I will PM you both my info for payment assuming your still interested.
Posted via Mobile Device

OK, sounds good.

[old Chevy guy]

Originally Posted by dbash

Thats the good news.... these bad boys weigh in at 48 pounds each and shipped to you is $53 each via UPS Ground. If you have a cheaper option I am open to it.

Via this method your total would be $156. I have no idea what these things cost new so I await your comments.
Posted via Mobile Device

I was fearing as much,Let me make a few calls around to diffrent parts stores,probably won't have time till tomorrow but if their as good as you say I'm thinking that it still may be viable.If you can even get them I'm sure new wont be cheap. I will let you know asap. Thanks! Frank

[dbash]

Originally Posted by Shaun1162

OK, sounds good.

PM sent
Posted via Mobile Device

[dbash]

Originally Posted by old Chevy guy

I was fearing as much,Let me make a few calls around to diffrent parts stores,probably won't have time till tomorrow but if their as good as you say I'm thinking that it still may be viable.If you can even get them I'm sure new wont be cheap. I will let you know asap. Thanks! Frank

No Kidding Frank.... UPS makes more off of these parts forums then the sellers do ;-)

Take your time, no rush.
Posted via Mobile Device

[dbash]

Originally Posted by 71 GMCDRVR

Yessir Be out saturday around 10 or so. Sorry I havn't called yet been a busy week!!

Great, were ready for you.
Posted via Mobile Device

[dbash]

Originally Posted by old Chevy guy

I was fearing as much,Let me make a few calls around to diffrent parts stores,probably won't have time till tomorrow but if their as good as you say I'm thinking that it still may be viable.If you can even get them I'm sure new wont be cheap. I will let you know asap. Thanks! Frank

Any news Frank?
Posted via Mobile Device

[old Chevy guy]

Originally Posted by dbash

Any news Frank?
Posted via Mobile Device

So far the only and best new price Ive found is $166 apiece. So used shipped still looks better. Not that I doubt your description at all but if it's not too much trouble could I get a few up close pictures before we close the deal? I'm looking into alternate shipping also,any bus stations near you? Ive been thinking about finding some roters to put the bud wheels on the front of my truck for years but wasn't actually ready to pull the trigger yet. I just don't want to miss a good deal. who knows when or if it might come up again. even the single wheel rotor thats stock on there now is $116 new. I'm not sure what parts will interchange directly but worst case I have a complete disk brake set up from a 72 3500 (less the roters) if the spindals and such prove to be diffrent.I sold the roters about 18 years ago to a guy I worked for at the time.

[dbash]

Originally Posted by old Chevy guy

So far the only and best new price Ive found is $166 apiece. So used shipped still looks better. Not that I doubt your description at all but if it's not too much trouble could I get a few up close pictures before we close the deal? I'm looking into alternate shipping also,any bus stations near you? Ive been thinking about finding some roters to put the bud wheels on the front of my truck for years but wasn't actually ready to pull the trigger yet. I just don't want to miss a good deal. who knows when or if it might come up again. even the single wheel rotor thats stock on there now is $116 new. I'm not sure what parts will interchange directly but worst case I have a complete disk brake set up from a 72 3500 (less the roters) if the spindals and such prove to be diffrent.I sold the roters about 18 years ago to a guy I worked for at the time.

no problem i will take some pics for you asap.
Posted via Mobile Device

[davestrucks]

pm sent on brake drums.

[dbash]

Originally Posted by davestrucks

pm sent on brake drums.

I forwarded the pics as you requested Dave.
Posted via Mobile Device

[BIGJAKE97]

recieved the motor mount towers and the tranny crossmember. thanks, jake

[Shaun1162]

Any chance you know what gear ratio the rearend is?

[dbash]

Originally Posted by Shaun1162

Any chance you know what gear ratio the rearend is?

I think it was 4:10 it sold locally thanks for asking.
Posted via Mobile Device