Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jlsanborn · 03-15-2013, 05:25 PM

Quote:

Originally Posted by DesertCat

Works like a charm! Man that thing is a monster, bet you could use it as an anvil

Just using the standard small block stands and TH (pause for a moment of silence...) trans x-member. Trans uses same mount and I have a new poly mount that is currently MIA but will be used when we see whether or not we will use this:

sorry Shawn, take a deep breath

Thanks for the tips! So on the engine stands, are they the earlier ones with the single stud or the '73 up clam-shell ones? Still trying to get a grip on this V8 or forward position thing.... Headed to the boneyard this weekend for some of those bits so I can mock mine up and make the hole in the floor.

DesertCat · 03-15-2013, 05:47 PM

Quote:

Originally Posted by jlsanborn

Thanks for the tips! So on the engine stands, are they the earlier ones with the single stud or the '73 up clam-shell ones? Still trying to get a grip on this V8 or forward position thing.... Headed to the boneyard this weekend for some of those bits so I can mock mine up and make the hole in the floor.

Yup, just the single stud type. Are you doing a similar trans transplant?

jlsanborn · 03-16-2013, 10:09 AM

Yup, the same thing! I had posted over on your "Yessss!! Out with the TH350, in with the M20, have a Q or two" thread but then found this one, which I'm glad I did. Headed to the boneyard today and probably would have bought a stamped steel clutch fork when I already have the forged one here.

shawno72 · 03-16-2013, 10:48 AM

Eww forks.......

FordFighter · 03-16-2013, 01:23 PM

God bless you and your men.
great,humorous,informative thread...
stay the hell away from anything thats capable of exploding over there,
get back alive so you can button this thing up,
wanna know how that thing drives and handles when you folks get back after killin all those bastards.

DesertCat · 03-16-2013, 07:43 PM

Quote:

Originally Posted by shawno72

Eww forks.......

Eww... I know, right? Did you notice this was the only part they left with that special Shawno patina?

where did I get that thing again...?

DesertCat · 03-16-2013, 07:44 PM

Quote:

Originally Posted by FordFighter

God bless you and your men.
great,humorous,informative thread...
stay the hell away from anything thats capable of exploding over there,
get back alive so you can button this thing up,
wanna know how that thing drives and handles when you folks get back after killin all those bastards.

Thank you. LOL just spreading the love over here! Hugs!

alsriv2 · 03-22-2013, 03:34 PM

Spent alot of time over there myself. I know what you are facing each day and it is good to see you have a great sense of humor while your truck is being reborn!

I am now stuck in Maryland (I am a Phoenix native) and hope to get back out there someday soon...

Stay safe and sane...

Oh yes...I am subscribed...love 68's

shawno72 · 03-22-2013, 11:31 PM

Quote:

Originally Posted by DesertCat

Eww... I know, right? Did you notice this was the only part they left with that special Shawno patina?

where did I get that thing again...?

I did, at least I know a part of my granny box will live on......

DesertCat · 03-23-2013, 12:00 AM

Quote:

Originally Posted by alsriv2

Spent alot of time over there myself. I know what you are facing each day and it is good to see you have a great sense of humor while your truck is being reborn!

I am now stuck in Maryland (I am a Phoenix native) and hope to get back out there someday soon...

Stay safe and sane...

Oh yes...I am subscribed...love 68's

Thanks! Yeah, three years now... ugh. Could be worse, could be Maryland

Quote:

Originally Posted by shawno72

I did, at least I know a part of my granny box will live on......

Hopefully not the grind, jamb, or howl part

Well, the boys got after it a bit today after a week off for a last minute mini deployment. Hoping for pics soon so I can post and oh yeah, another slight fail from a place you wouldn't expect it... stay tuned...

oldblue1968chevy · 03-23-2013, 12:21 AM

Funny build lol

hang in there you'll be slammin gears on a 4spd before you know it

DesertCat · 03-25-2013, 12:24 AM

Quote:

Originally Posted by oldblue1968chevy

Funny build lol

hang in there you'll be slammin gears on a 4spd before you know it

"Funny".

That's what my wife says when I tell her I need something else for the truck.

DesertCat · 03-25-2013, 12:38 AM

Well, we have some progress to report. And a setback from left field. And progress

Started getting the clutch linkage going together and discovered that despite having nearly two sets of stuff, there was no clutch fork "nut" (the chisel shaped thing that contacts the fork, pic #1) and one of the rods seemed short. Hmmm....

Low Elco · 03-25-2013, 12:42 AM

Hrmrmmmmm....
Posted via Mobile Device

DesertCat · 03-25-2013, 12:54 AM

Our in-house incoming parts quality control inspector was apparently distracted by his girlfriend or something and one got past him. Uh, two actually.

The reason the linkage was short? It had been cut and welded shorter. What are the odds?

easy to see now.

...and why spend 15 cents on a cotter pin when we have all these bent nails around?

DesertCat · 03-25-2013, 02:20 AM

A bit of head scratching, a phone call and a trip to our nearby truck parts guy and back in business

Russ.W. · 03-25-2013, 02:48 AM

Great thread. Your boys really get stuck into it.

Your trucks previous owner must have been related to mine. Wire "throttle rods", firbreglass "repairs", and a host of other interesting ideas.

shawno72 · 03-25-2013, 07:35 AM

We should of talked more. I had everything you needed

oh well glad you found your way around it

Posted via Mobile Device

DesertCat · 03-25-2013, 11:50 AM

Quote:

Originally Posted by Russ.W.

Great thread. Your boys really get stuck into it.

Your trucks previous owner must have been related to mine. Wire "throttle rods", firbreglass "repairs", and a host of other interesting ideas.

Sounds like our PO's could be related. Alcohol and bad judgement often leads to inbreeding amongst those with quantum mechanical engineering "gifts"

DesertCat · 03-25-2013, 11:52 AM

Quote:

Originally Posted by shawno72

We should of talked more. I had everything you needed

oh well glad you found your way around it

Posted via Mobile Device

Thought we had it covered, didn't see it until yesterday. Thanks Buddy

**67cheby** · 03-25-2013, 01:22 PM

nice work repairing all of their shortcuts !

jlsanborn · 03-25-2013, 06:31 PM

Ha! I've seen the nail bit more than once

You're getting it done right now. Nice work boys!

DesertCat · 03-25-2013, 07:18 PM

Quote:

Originally Posted by 67cheby

nice work repairing all of their shortcuts !

Thanks for noting the skills

We're trying for 23rd place at the Dry Crotch Nationals if we get done in time

DesertCat · 03-25-2013, 07:21 PM

Quote:

Originally Posted by jlsanborn

Ha! I've seen the nail bit more than once

You're getting it done right now. Nice work boys!

Don't tell anyone.... I've done that more than once!

DesertCat · 03-25-2013, 07:31 PM

In other news today....

03-16-2013, 10:09 AM	#78
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Yup, the same thing! I had posted over on your "Yessss!! Out with the TH350, in with the M20, have a Q or two" thread but then found this one, which I'm glad I did. Headed to the boneyard today and probably would have bought a stamped steel clutch fork when I already have the forged one here. __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

03-16-2013, 10:48 AM	#79
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Eww forks....... __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-16-2013, 01:23 PM	#80
FordFighter Registered User Join Date: Nov 2012 Location: phelan,ca Posts: 29	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB God bless you and your men. great,humorous,informative thread... stay the hell away from anything thats capable of exploding over there, get back alive so you can button this thing up, wanna know how that thing drives and handles when you folks get back after killin all those bastards. __________________ Work on your truck and work your truck your my kind of people, Love my ol'20..

03-22-2013, 03:34 PM	#83
alsriv2 Registered User Join Date: Sep 2010 Location: Formerly MD and San Diego, now loving life in Arizona Posts: 1,636	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Spent alot of time over there myself. I know what you are facing each day and it is good to see you have a great sense of humor while your truck is being reborn! I am now stuck in Maryland (I am a Phoenix native) and hope to get back out there someday soon... Stay safe and sane... Oh yes...I am subscribed...love 68's __________________ Alan 2012 Ram 3500 Dually Crew Cab 6.7 Cummins 2014 Palomino Columbus 340RK 5th wheel '69 Chevy C10 396BB

03-23-2013, 12:21 AM	#86
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Funny build lol hang in there you'll be slammin gears on a 4spd before you know it __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-25-2013, 12:38 AM	#88
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Well, we have some progress to report. And a setback from left field. And progress Started getting the clutch linkage going together and discovered that despite having nearly two sets of stuff, there was no clutch fork "nut" (the chisel shaped thing that contacts the fork, pic #1) and one of the rods seemed short. Hmmm.... Attached Images __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

03-25-2013, 12:42 AM	#89
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Hrmrmmmmm.... Posted via Mobile Device __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

03-25-2013, 12:54 AM	#90
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Our in-house incoming parts quality control inspector was apparently distracted by his girlfriend or something and one got past him. Uh, two actually. The reason the linkage was short? It had been cut and welded shorter. What are the odds? easy to see now. ...and why spend 15 cents on a cotter pin when we have all these bent nails around? Attached Images __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

03-25-2013, 02:20 AM	#91
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB A bit of head scratching, a phone call and a trip to our nearby truck parts guy and back in business Attached Images __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

03-25-2013, 02:48 AM	#92
Russ.W. Registered User Join Date: Aug 2009 Location: Australia Posts: 275	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Great thread. Your boys really get stuck into it. Your trucks previous owner must have been related to mine. Wire "throttle rods", firbreglass "repairs", and a host of other interesting ideas. __________________ *Show Me How To Live* *"Wrongside"* My factory right-hand drive '67 C10 build

03-25-2013, 07:35 AM	#93
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB We should of talked more. I had everything you needed oh well glad you found your way around it Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-25-2013, 01:22 PM	#96
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB nice work repairing all of their shortcuts ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-25-2013, 06:31 PM	#97
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB Ha! I've seen the nail bit more than once You're getting it done right now. Nice work boys! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

03-25-2013, 07:31 PM	#100
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: Devastation and Reform - abused, beaten, and botched yet unrefined 67 SWB In other news today.... Attached Images __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.