CA Cabs Need any cuts, parts etc?! - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

7dee2 · 10-19-2013, 12:47 AM

Looks good Adam thank you for the update..

Thanks,

Hard_Rain420 · 10-19-2013, 11:19 AM

I need the area "both sides" along the seam of the floor and toe board. I also need both kick panels namely the lower portions where they're known to rot. I'll have to get measurements and pictures Monday.

Undone · 10-20-2013, 07:32 PM

How much for trans tunnel as outlined straight back to where fuel line goes thru floor? Shipping to 30530.

budnikguy · 10-23-2013, 11:16 PM

$50 delivered....

Quote:

Originally Posted by Undone

How much for trans tunnel as outlined straight back to where fuel line goes thru floor? Shipping to 30530.

Undone · 10-25-2013, 07:24 PM

Quote:

Originally Posted by budnikguy

$50 delivered....

I'll take it, PM payment info.

Undone · 11-06-2013, 09:46 PM

Quote:

Originally Posted by Undone

How much for trans tunnel as outlined straight back to where fuel line goes thru floor? Shipping to 30530.

Did this get cut and shipped?

sambudo · 11-12-2013, 12:55 AM

Quote:

Originally Posted by Hard_Rain420

I need the area "both sides" along the seam of the floor and toe board. I also need both kick panels namely the lower portions where they're known to rot. I'll have to get measurements and pictures Monday.

Do you have this available on another cab/ I'm interested if you do.. how many gr8 dane pups do you have? i have one 18mo. old. thanks

budnikguy · 11-13-2013, 12:58 PM

Yeah, I can help with that...just get me pics and measurements. I have two Dane pups...Harley and Nova.. they are 10 month old sisters...

Adam

Quote:

Originally Posted by sambudo

Do you have this available on another cab/ I'm interested if you do.. how many gr8 dane pups do you have? i have one 18mo. old. thanks

Sanchez Garage · 10-23-2013, 11:03 PM

any frames? fenders ?Were in Riverside-- I am off Vanburren/canyon ridge

budnikguy · 10-23-2013, 11:14 PM

We are practically neighbors...i am on Roberts near Dauchy. I can help you with all of that.

Adam

ksucatz · 10-23-2013, 11:55 PM

How is the roof/gutter areas? I have some rust that I need to take care of. I haven't removed all the old seam sealer yet to see the extent but know there are at least a couple holes. Might need some windshield pinch areas too.

MudBug · 10-24-2013, 11:30 AM

How much of the firewall is left? I'm looking for the door post foward.

budnikguy · 10-25-2013, 03:48 PM

Cutting tomorrow, I will let you know what is left shortly there after

Quote:

Originally Posted by MudBug

How much of the firewall is left? I'm looking for the door post foward.

budnikguy · 10-25-2013, 03:47 PM

Sure i could help you there...lmk what exact areas you need

Quote:

Originally Posted by ksucatz

How is the roof/gutter areas? I have some rust that I need to take care of. I haven't removed all the old seam sealer yet to see the extent but know there are at least a couple holes. Might need some windshield pinch areas too.

Youey · 10-24-2013, 12:55 PM

Looking for top half of firewall where the pinch weld is makes a little
Chase for the wiring to go through I think the cowl gasket goes there for the hood. How much would it cost of that. If you need a picture ill get one

budnikguy · 10-25-2013, 03:53 PM

Sure i can help you with that, please post detailed pics of what you need.

Quote:

Originally Posted by Youey

Looking for top half of firewall where the pinch weld is makes a little
Chase for the wiring to go through I think the cowl gasket goes there for the hood. How much would it cost of that. If you need a picture ill get one

Hard_Rain420 · 10-25-2013, 10:59 AM

Here's some panels I need shipped to 32906. I can wait in line if you have other cabs available in the future.

Evaded · 10-25-2013, 03:42 PM

still was needing passenger non rusty cab corner, you never lmk...

budnikguy · 10-25-2013, 03:54 PM

Still working on cuts..should get caught up this Sat-Mon...

Quote:

Originally Posted by Evaded

still was needing passenger non rusty cab corner, you never lmk...

kasketrider · 10-26-2013, 12:23 AM

is the dash available? If so how much do you need for it I can pick it up and pay cash in person.

budnikguy · 10-26-2013, 03:58 PM

Dash is available, matter of fact, if you are wanting a non a/c dash I already have a clean one removed and ready to go...

Adam
951-544-0721

Quote:

Originally Posted by kasketrider

is the dash available? If so how much do you need for it I can pick it up and pay cash in person.

Youey · 11-02-2013, 06:57 PM

Name: image.jpg
Views: 249
Size: 98.1 KB

Do you have this section left? Can you send me a price on it if still available

budnikguy · 11-13-2013, 12:55 PM

I believe I still do..let me check it out this Saturday..

Quote:

Originally Posted by Youey

Attachment 1170019

Do you have this section left? Can you send me a price on it if still available

Sanchez Garage · 11-11-2013, 11:11 PM

Adam, I have decided to get rid of my 68 cab. I would like to know if you have a frame, short bed, windshield, ( long shot Porterbuilt c notch) for a 63 c10 maybe we can do a trade.

budnikguy · 11-13-2013, 12:56 PM

Sorry, I do not have anything really for a 60-66....just 67-72 stuff...and no go on a PB notch.

Quote:

Originally Posted by Sanchez Garage

Adam, I have decided to get rid of my 68 cab. I would like to know if you have a frame, short bed, windshield, ( long shot Porterbuilt c notch) for a 63 c10 maybe we can do a trade.

10-19-2013, 12:47 AM	#1
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,986	Re: Cabs Need any cuts, parts etc?! Looks good Adam thank you for the update.. Thanks, __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

10-19-2013, 11:19 AM	#2
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: Cabs Need any cuts, parts etc?! I need the area "both sides" along the seam of the floor and toe board. I also need both kick panels namely the lower portions where they're known to rot. I'll have to get measurements and pictures Monday.

10-20-2013, 07:32 PM	#3
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: Cabs Need any cuts, parts etc?! How much for trans tunnel as outlined straight back to where fuel line goes thru floor? Shipping to 30530. Attached Images

10-23-2013, 11:03 PM	#9
Sanchez Garage Registered User Join Date: Nov 2012 Location: Woodcrest/Riverside, Ca Posts: 37	Re: Cabs Need any cuts, parts etc?! any frames? fenders ?Were in Riverside-- I am off Vanburren/canyon ridge

10-23-2013, 11:14 PM	#10
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Cabs Need any cuts, parts etc?! We are practically neighbors...i am on Roberts near Dauchy. I can help you with all of that. Adam

10-23-2013, 11:55 PM	#11
ksucatz Suppose to be workin........ Join Date: Jul 2001 Location: Shawnee, KS USA Posts: 164	Re: Cabs Need any cuts, parts etc?! How is the roof/gutter areas? I have some rust that I need to take care of. I haven't removed all the old seam sealer yet to see the extent but know there are at least a couple holes. Might need some windshield pinch areas too. __________________ Brent '68 C10 '70 C10 '72 LeMans "03 Trailblazer "Stupidity is like a skill, some are born with it and some develop it over a period of time."" Author unknown

10-24-2013, 11:30 AM	#12
MudBug Registered User Join Date: Jan 2007 Location: tennessee Posts: 159	Re: Cabs Need any cuts, parts etc?! How much of the firewall is left? I'm looking for the door post foward.

10-24-2013, 12:55 PM	#15
Youey Registered User Join Date: Oct 2013 Location: New Jersey Posts: 222	Re: Cabs Need any cuts, parts etc?! Looking for top half of firewall where the pinch weld is makes a little Chase for the wiring to go through I think the cowl gasket goes there for the hood. How much would it cost of that. If you need a picture ill get one

10-25-2013, 10:59 AM	#17
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: Cabs Need any cuts, parts etc?! Here's some panels I need shipped to 32906. I can wait in line if you have other cabs available in the future.

10-25-2013, 03:42 PM	#18
Evaded Registered User Join Date: Apr 2013 Location: San Antonio TX Posts: 424	Re: Cabs Need any cuts, parts etc?! still was needing passenger non rusty cab corner, you never lmk... __________________ If I see a Zombie.. Im runnin it over with my Truck.

10-26-2013, 12:23 AM	#20
kasketrider Registered User Join Date: Jul 2011 Location: san diego california Posts: 22	Re: Cabs Need any cuts, parts etc?! is the dash available? If so how much do you need for it I can pick it up and pay cash in person.

11-02-2013, 06:57 PM	#22
Youey Registered User Join Date: Oct 2013 Location: New Jersey Posts: 222	Re: Cabs Need any cuts, parts etc?! Do you have this section left? Can you send me a price on it if still available

11-11-2013, 11:11 PM	#24
Sanchez Garage Registered User Join Date: Nov 2012 Location: Woodcrest/Riverside, Ca Posts: 37	Re: Cabs Need any cuts, parts etc?! Adam, I have decided to get rid of my 68 cab. I would like to know if you have a frame, short bed, windshield, ( long shot Porterbuilt c notch) for a 63 c10 maybe we can do a trade.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.