MI Reconditioned gauge Clusters F/S

[TBONE1964]

Originally Posted by Elliot949

T-bone... In your first post the second picture where the tach goes there is a plastic piece stuck to the lens... can you get that off without breaking it and if you can what would you take for it... PM me with the info... thanks... Dan

Hi Dan,

PM sent

[mcbassin]

Tbone, have you seen THIS thread? Have you given any thought to building this type electronic speedo clusters for the electronically controlled transmission trucks?

[TBONE1964]

Originally Posted by mcbassin

Tbone, have you seen THIS thread? Have you given any thought to building this type electronic speedo clusters for the electronically controlled transmission trucks?

Yes sir, I think a lot about doing something like that. So far, I have had no time to work on the idea. I guess that is a good thing.

If I do something like that it will have to be a method that is quick and repeatable. I would also need to have access to all of the parts needed. I guess I am thinking have a set up that is ready to install in a customer cluster when they are ready for it rather than have someone wait for months each time.

[Kennuck]

I have months before I will need one for electronic trans, if you want to work something out?

[TBONE1964]

TTT,

Ask me about restoring your gauge cluster. There are also many options to a standard restoration. Ask me for details on your specific needs.

Thank you to all for your business. I appreciate all of it.
Tom

[darkhorse970]

What are your thought on adding vacuum gauge with a repop gauge? I already have a tach cluster with new bezel and circuit board. I'd like to have it cleaned and tested though.

[TBONE1964]

Originally Posted by darkhorse970

What are your thought on adding vacuum gauge with a repop gauge? I already have a tach cluster with new bezel and circuit board. I'd like to have it cleaned and tested though.

Hi Keith,

PM sent,
Thank you,
Tom

[TBONE1964]

ttt

Contact me for all of your gauge cluster needs. I build from my inventory, restore your existing cluster and sell parts.

Thank you all for looking,
Tom

[TBONE1964]

ttt

Remember, I give two microfiber towels with a cluster order or restoration service.

I will stand behind my work and offer a 90 day warranty on all cluster restorations.

Ask me about my own tach harnesses for point style and HEI ignition systems.

Thank you for looking,
Tom

[TBONE1964]

Check out the Web site for a special announcement. Look at the home page for details and good luck.

Take care,
Tom

[SLOW POKE]

Just a suggestion to anyone who has used Tom's services. There is a Customer Reviews & Feedback section on the web site. I for one read reviews on everything I buy on the interweb. Leave a review, help a brother out...

[TBONE1964]

Originally Posted by SLOW POKE

Just a suggestion to anyone who has used Tom's services. There is a Customer Reviews & Feedback section on the web site. I for one read reviews on everything I buy on the interweb. Leave a review, help a brother out...

I appreciate it sir
Tom

[mike1971c10]

Tom,
Would you like to have used gauges? I bought a cluster for the fuel gauge and I don't need the rest. from a 70 c10
mike

[TBONE1964]

Originally Posted by mike1971c10

Tom,
Would you like to have used gauges? I bought a cluster for the fuel gauge and I don't need the rest. from a 70 c10
mike

Hi Mike,

Yes, always looking for usable gauges and other cluster parts.

PM me and let me know what you have and need for payment.

I appreciate it, thank you,
Tom

[mike1971c10]

Tom, I'll UPS these to you free just pm your info.

[TBONE1964]

Wow, thank you so much Mike. PM is on the way.

Take care,
Tom

[mike1971c10]

Tom, I'll take care of the shipping, you never can tell I may need something in the future
mike

[19Chevy67C10]

Tom, I'm a loyal follower of your savy work on these clusters, Iv'e had better luck at zeroing out the speedo with the square slot beter than the later style with the round hole on the tin. The 67 one I had zeroed out was the square one and I gave it away to gdavis on this fourm. Is there a way I can zero out a 63 model c-10 speedo for a friend, are they the same style or same situation....Kinda like a rubik cube ha ha....Also do you offer silk screening services for cluster that have rusted??? If so I may need some work done..God Bless.....

[TBONE1964]

Originally Posted by 19Chevy67C10

Tom, I'm a loyal follower of your savy work on these clusters, Iv'e had better luck at zeroing out the speedo with the square slot beter than the later style with the round hole on the tin. The 67 one I had zeroed out was the square one and I gave it away to gdavis on this fourm. Is there a way I can zero out a 63 model c-10 speedo for a friend, are they the same style or same situation....Kinda like a rubik cube ha ha....Also do you offer silk screening services for cluster that have rusted??? If so I may need some work done..God Bless.....

You should be able to zero the odometer on the 62 the same way as the 67. I am not 100% sure I follow you on the method. Are you talking about the square hole where the speedometer cable goes? When you say "the later style with the round hole in the tin" I am not sure what you are talking about.

What year cluster do you need silk screening on? I can do it either way. The actual silk screening is a little pricey or there is the overlay option which is more affordable but limited to what year you need it for.

Let me know and thank you,
Tom

[TBONE1964]

Originally Posted by mike1971c10

Tom, I'll take care of the shipping, you never can tell I may need something in the future
mike

Mike,

Very nice of you and please let me know if you ever need anything in the future.

I appreciate this,
Take care,
Tom

[TBONE1964]

ttt

taking orders or restoring your existing cluster. I can take care of your gauge cluster needs.

Please help support "Project Underhaulin" it is for a great cause and even small donations help.

Happy Holiday to all,
Tom

[TBONE1964]

A small portion of the inventory at Classic Gauge and Cluster.

I have what you need for any cluster build.

Coming in June, some more standard tach clusters restored for sale.

Thank you for looking.

Tom

[blazerowner71]

I have a tach cluster with air pressure gauge how rare is that ?

[TBONE1964]

Originally Posted by blazerowner71

I have a tach cluster with air pressure gauge how rare is that ?

I am not sure I would call them rare. Although the air gauge was not used on the 10-40 series, they were actually pretty common on the 50 + series trucks with air brakes. Someone correct me if I am wrong but I personally have never seen one in a 40 series.

They are now commonly used on our trucks for people who have air ride suspensions as a monitor of air pressure.

If you have one that is in better than average condition, it is worth in today's market about $250.00-$450.00, depending on condition. A completely restored one might get you close to $600.00

Another note is that these air gauges or lenses are not reproduced.

Hope this helps
Tom

[blazerowner71]

Thanks for the info i really don't need the air gauge in my cluster i bought it on craigs list for $100 and would like to get it restored is there any thing you can replace the air gauge with ?