KS 72 chevy longhorn, pretty clean old truck getting parted

[ls1nova71]

Hey Randy, I'm going to pass on the tailgate. The dents a little bigger than I was expecting, totally couldn't see it in the first pics. Thanks anyway!

[ralphie628]

Ralphie628, are you needing upper or lower, $8 each
.

i am sorry. i didnt said. i am looking for driver hood hinge.

[teeitup]

Eric, no problem

Ralphie628, $15 and I can ship it with the gauge setup

Thanks Randy

[low&slow]

Do you still have the wheel tubs out of the bed? If so, what's the condition on them?

Also would like price on them and cost of shipping to 83634

[teeitup]

I've got one guy ahead of you on them. I need to get them off and check condition, that will probably be Mon or Tues

[low&slow]

Originally Posted by teeitup

I've got one guy ahead of you on them. I need to get them off and check condition, that will probably be Mon or Tues

Alright thanks. Let me know if he buys.

[ralphie628]

Originally Posted by teeitup

Eric, no problem

Ralphie628, $15 and I can ship it with the gauge setup

Thanks Randy

would you check just shipping the cluster and knobs? then check the shipping with the hinge. please and thanks

[29od1]

Randy, I'll pass the armrests to kcsa75.
Can you post the spot on the grill that needs work?
Thanks
David

[rich67]

randy ill take that glove box along with vent pull linkage(passenger) when you get time.

[BMERDOC]

how much for the dash pad shipped to 23229?

[teeitup]

low&slow, sure will

ralphie628, I can do that

David, I got it off, I will get some pics in morning and post them

Rich, you wanting the door or liner?

Thanks Randy

[teeitup]

bmerdoc, $40 plus shipping, I'll try to get quote Sun but it may be Mon. Thanks Randy

[Trucolur]

Originally Posted by teeitup

75555555555

I'm interested in the power steering set up !! Gear box pump and brackets!! How much and what shape is it in ???

[Trucolur]

Originally Posted by Trucolur

I'm interested in the power steering set up !! Gear box pump and brackets!! How much and what shape is it in ???

Power steering my zip is 38053!!! I was wanting the whole set up gear box pump brackets !! Wanted to give u my zip code !! Sorry

[chewysask]

I will take the passenger door regulator if REED 72 passes.How much do you want for the pair of the ferrules and screws for the door?

[kda2000]

Randy,

Can you check and see if this truck has the HD carrier bearing mounting bracket used on some C20s -- like the one in the first picture in this thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=584787

If it does, what price to 78737? - No hurry, pull it when you get easy access, after bed is all removed.

Thanks, Ken

[REEDS 72]

All take the pass side window reg, are the door handle relays good? spring not broken and checking the cond of the tail light harness thanks.shipping will be 84003

[Hard_Rain420]

I'll take the exterior handles.... they look better than the ones on my truck and all my extras. Same goes with wheel tubs. They already look better than the ones I have.

Please send me your PayPal addy and funds will be sent as a gift.

Thanks!

Rich

[jeb1867]

Thanks for the pics Randy, I am going to pass on the belts and visors.
Sorry,
-Jake

[RaceAGMC]

I'm interested in the grille insert, grille supports, left, right and center along with the hood latch. My zip is 28216.

[9teen69]

Randy - I'll take the jack and exhaust bracket. I don't need wrench if not stock...I have one.(save on weight)
Waiting on pics of heat shield...want to make sure better than the one I got.
thanks
Brant

[kcsa75]

Originally Posted by teeitup

kcsa75, Willie, arm rests may be sold already. Door panels are $60 plus shipping, or you can pay for them and I can hold them. They are in good shape no cracks. I have no idea on headlight switch

Thanks Randy

Randy, I think you made a mistake. You told me $60 for those $30 door panels. :-)

Seriously, since they don't have the scroll work, I was thinking considerably less. How about $40 with the arm rests?

[teeitup]

Trucolur, It all appears to be in good shape. For pump/brackets/pulley and PS box $80 plus shipping

chewysask, He wants this reg, I have another one out there. $15 for the door screws and ferrules

kda2000, I'll crawl under there later today and look

Reeds72, pass reg is yours. Door regs are good, one is almost brand new, $20 for the pair.. I'll try to look at rear harness later today

Hard_Rain420, Rich, door handles are yours. Your first in line on tubs. I'll get them off and pic this week, then we can settle up

jeb1867, no problem

RaceAGMC, grill insert is broke. I have the outer brackets off another truck in shed. Those and center support and hood latch $35 plus shipping

9teen69, Brant, pics coming of heat shield. It has one small burnt through spot, its not soft around the hole at all. Its on the backside where no one can see it

Willie, I better pass on on offer, they are black with no holes or cracks. If they were any other color I'd say yes but as you know black sells better

Thanks Randy

[teeitup]

ontrak12, Bill the visors are yours $40 plus shipping. I'll get quote Mon hopefully. Thanks Randy

[Dirt's72]

I'll take the window cranks Randy, Thanks.