1968 CST camper special 50th - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

northerngmc · 03-19-2014, 04:31 PM

Quote:

Originally Posted by 1968C20CST

Does the SPID plate on your 50th call for the insert on the seat or is it not listed at all?

1968C20CST · 03-19-2014, 04:38 PM

DANG! Looks like mine had the vinyl insert and not the cloth! Thanks for posting your SPID.
Don't guess it matters as it will look better than the orange!

1968C20CST · 03-24-2014, 06:28 PM

Got the 350 from Jegs today, now to start gathering all the parts to install!

**DeadheadNM** · 03-24-2014, 06:42 PM

Quote:

Originally Posted by Joesjunk

I wouldn't think twice about doing a body swap. You have the same year 4x4 chassis. Keep it mostly stock and correct. I have done this swap many times, it's pretty simple and (to me) makes the truck much more valuable.

x2. I love a clean, matching original truck but you have a unique chance to pair these two 68's - I'd do the swap! A 50th K20 Custom Camper would look too cool.

72 tigger · 03-24-2014, 09:34 PM

Quote:

Originally Posted by DeadheadNM

x2. I love a clean, matching original truck but you have a unique chance to pair these two 68's - I'd do the swap! A 50th K20 Custom Camper would look too cool.

I agree- 4x4 would be really sharp

1968C20CST · 03-31-2014, 04:23 PM

Looking for rear gear ratio on my truck, not on SPID would it be anywhere else?

SS Tim · 03-31-2014, 04:48 PM

Does anyone use the links in my signature?

The code of course will/should be stamped into rear axle. Location and codes are specific to the type of axle.

But you could always look it up on the linked powertrain page.
That lists the various powertrains with standard and as available the optional ratios. If you do not have a ratio shown on the SPID it is likely a standard ratio.

Or you could always just look it up below. :-)

However, as always, what a vehicle was built with may no longer be correct.

1968C20CST · 03-31-2014, 06:05 PM

Thanks Tim, it had slipped my mind that you had that in your sig.

preacher anthony · 11-06-2014, 09:25 PM

I need the material for my '68 gold anniversary. Picking her up this weekend. Seat has been replaced. I need to know how to contact SMS for white and gold material. Thanks

northerngmc · 11-06-2014, 10:01 PM

Quote:

Originally Posted by preacher anthony

I need the material for my '68 gold anniversary. Picking her up this weekend. Seat has been replaced. I need to know how to contact SMS for white and gold material. Thanks

Take a look here, this guy found some

http://67-72chevytrucks.com/vboard/s...d.php?t=152979

View Poll Results: Stay 2 wheel drive or convert to 4 wheel drive?
Stay 2 wheel	47	68.12%
Body swap onto k20 4x4 chassis	22	31.88%
Voters: 69. You may not vote on this poll

03-19-2014, 04:38 PM	#77
1968C20CST Registered User Join Date: Dec 2013 Location: Norwood, Colorado Posts: 83	Re: 1968 CST camper special 50th DANG! Looks like mine had the vinyl insert and not the cloth! Thanks for posting your SPID. Don't guess it matters as it will look better than the orange!

03-24-2014, 06:28 PM	#78
1968C20CST Registered User Join Date: Dec 2013 Location: Norwood, Colorado Posts: 83	Re: 1968 CST camper special 50th Got the 350 from Jegs today, now to start gathering all the parts to install!

03-31-2014, 04:23 PM	#81
1968C20CST Registered User Join Date: Dec 2013 Location: Norwood, Colorado Posts: 83	Re: 1968 CST camper special 50th Looking for rear gear ratio on my truck, not on SPID would it be anywhere else?

03-31-2014, 04:48 PM	#82
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: 1968 CST camper special 50th Does anyone use the links in my signature? The code of course will/should be stamped into rear axle. Location and codes are specific to the type of axle. But you could always look it up on the linked powertrain page. That lists the various powertrains with standard and as available the optional ratios. If you do not have a ratio shown on the SPID it is likely a standard ratio. Or you could always just look it up below. :-) However, as always, what a vehicle was built with may no longer be correct. Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban Last edited by SS Tim; 03-31-2014 at 05:13 PM.

03-31-2014, 06:05 PM	#83
1968C20CST Registered User Join Date: Dec 2013 Location: Norwood, Colorado Posts: 83	Re: 1968 CST camper special 50th Thanks Tim, it had slipped my mind that you had that in your sig.

11-06-2014, 09:25 PM	#84
preacher anthony Registered User Join Date: Jul 2013 Location: Pembroke NC Posts: 323	Re: 1968 CST camper special 50th I need the material for my '68 gold anniversary. Picking her up this weekend. Seat has been replaced. I need to know how to contact SMS for white and gold material. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.