MI ****Part Out 72 C20 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1956cameo · 03-21-2016, 07:37 PM

If available I would be interested in the accelerator cable bracket that bolts the the drivers side rear of the carburetor pending price. My zip is 77584. I can PM a picture of the part I need if you need clarification on what I am talking about.

cjmorr13 · 04-07-2016, 07:43 AM

Do you have dash aux tank selector and associated components?

**DaHos** · 04-07-2016, 10:24 AM

Quote:

Originally Posted by cjmorr13

Do you have dash aux tank selector and associated components?

Sry, I do not......

WEBBY1 · 04-08-2016, 10:47 PM

Bed for sale? Also in Michigan

**DaHos** · 04-09-2016, 08:47 AM

Quote:

Originally Posted by WEBBY1

Bed for sale? Also in Michigan

The bed was toast, got a couple patch panels off it......I have another but it also has been worked over a bit.........no "Good" ones at this time, sry...

johnscab · 04-09-2016, 01:30 PM

how much for the power steering brackets and box to 92126

DarkKnightWong · 04-09-2016, 05:05 PM

Hi

I have a 69 with the area under the cowl where the wiper motor mounts is complete gone.
Motor is just hanging there

Do you have any good cabs that you can cut a patch panel from ?

im also interested in the corners of the cowl channel that has the engine harness running through. My corners where they curve down have rot.

I'm in GA 30338

Thanks
Allen

**DaHos** · 04-10-2016, 11:26 AM

Quote:

Originally Posted by johnscab

how much for the power steering brackets and box to 92126

Back bracket was cut, have the cast lower and gear box available. $90 plus shipping.

Quote:

Originally Posted by DarkKnightWong

Hi

I have a 69 with the area under the cowl where the wiper motor mounts is complete gone.
Motor is just hanging there

Do you have any good cabs that you can cut a patch panel from ?

im also interested in the corners of the cowl channel that has the engine harness running through. My corners where they curve down have rot.

I'm in GA 30338

Thanks
Allen

Sry, Cab has been taken to its final resting place, no other cabs for cuts at this time.

**70STOVEBOLT** · 08-19-2016, 03:00 PM

Dave, do you have any driver's side regulators? Doesn't matter on year, I will be removing the crank mechanism anyway to convert to power.

Thanks,
Mark

TBohne · 08-19-2016, 06:18 PM

Interested in sway bar and brackets if you still have it, shipping to 77830

**68Custom** · 08-20-2016, 12:38 AM

Do you have a panhard bar for sale? Mine is bent on my C20.

Thanks,

Aaron

**DaHos** · 08-20-2016, 10:26 AM

Quote:

Originally Posted by 70STOVEBOLT

Dave, do you have any driver's side regulators? Doesn't matter on year, I will be removing the crank mechanism anyway to convert to power.

Thanks,
Mark

Got ya covered, $23 shipped

Quote:

Originally Posted by TBohne

Interested in sway bar and brackets if you still have it, shipping to 77830

NA at this time, sry

Quote:

Originally Posted by 68Custom

Do you have a panhard bar for sale? Mine is bent on my C20.

Thanks,

Aaron

I do, i need to get it pulled (Dana 60), $35 shipped

**70STOVEBOLT** · 08-20-2016, 10:56 AM

Dave, PM your payment info and I will get you paid.

Thanks,
Mark

jr1000yarder · 08-20-2016, 10:58 AM

I see a 69 grill on the wall................for sale???

**DaHos** · 08-20-2016, 11:06 AM

Quote:

Originally Posted by jr1000yarder

I see a 69 grill on the wall................for sale???

It is available, Original first run style.....I will get some detailed pics for u when I get to the shop........

jr1000yarder · 08-20-2016, 11:21 AM

Quote:

Originally Posted by DaHos

It is available, Original first run style.....I will get some detailed pics for u when I get to the shop........

ok man, lmk

I don't need bezels or lights......

Thanks, Rich

**gmc 2500 4x4** · 08-21-2016, 06:03 AM

do you have the steering coupler off the steering box?

Theboatandcarman · 08-21-2016, 04:25 PM

if its a coil spring c20 i need the rear 18"-2' of the frame (dont need crossmembers for easier shipping)

also need a 72 complete accelerator pedal thanks!

**70STOVEBOLT** · 08-24-2016, 11:42 AM

Dave, received the regulator today.

Thanks again,
Mark

carbuff382 · 08-25-2016, 10:15 PM

Quote:

Originally Posted by 70STOVEBOLT

Dave, received the regulator today.

Thanks again,
Mark

I am in need of the brake pedal arm, would you be willing to part that out?
Thanks, Marc

jr1000yarder · 08-27-2016, 07:30 PM

Any news on the grill? ? How about a core support

Theboatandcarman · 08-29-2016, 06:34 PM

Quote:

Originally Posted by jr1000yarder

Any news on the grill? ? How about a core support

Perhaps he's away for a bit? Also awaiting

**DaHos** · 08-30-2016, 07:48 PM

Quote:

Originally Posted by jr1000yarder

any news on the grill? ? How about a core support

pics:

**DaHos** · 08-30-2016, 07:51 PM

Quote:

Originally Posted by Theboatandcarman

if its a coil spring c20 i need the rear 18"-2' of the frame (dont need crossmembers for easier shipping)

also need a 72 complete accelerator pedal thanks!

This frame went to scrap awhile back sry.......let me see what I have for good pedal/cable assemblies..

Theboatandcarman · 08-30-2016, 08:42 PM

Quote:

Originally Posted by DaHos

This frame went to scrap awhile back sry.......let me see what I have for good pedal/cable assemblies..

thank you! let me know if you come across it

03-21-2016, 07:37 PM	#76
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Part Out 72 C20 If available I would be interested in the accelerator cable bracket that bolts the the drivers side rear of the carburetor pending price. My zip is 77584. I can PM a picture of the part I need if you need clarification on what I am talking about. __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

04-07-2016, 07:43 AM	#77
cjmorr13 Registered User Join Date: Feb 2016 Location: Midland, TX Posts: 84	Re: Part Out 72 C20 Do you have dash aux tank selector and associated components?

04-08-2016, 10:47 PM	#79
WEBBY1 Registered User Join Date: Dec 2011 Location: Royal Oak, Michigan Posts: 193	Re: Part Out 72 C20 Bed for sale? Also in Michigan

04-09-2016, 01:30 PM	#81
johnscab Registered User Join Date: Nov 2012 Location: San Diego, CA Posts: 91	Re: Part Out 72 C20 how much for the power steering brackets and box to 92126

04-09-2016, 05:05 PM	#82
DarkKnightWong Registered User Join Date: Oct 2012 Location: Dunwoody GA Posts: 34	Re: Part Out 72 C20 Hi I have a 69 with the area under the cowl where the wiper motor mounts is complete gone. Motor is just hanging there Do you have any good cabs that you can cut a patch panel from ? im also interested in the corners of the cowl channel that has the engine harness running through. My corners where they curve down have rot. I'm in GA 30338 Thanks Allen

08-19-2016, 03:00 PM	#84
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,455	Re: Part Out 72 C20 Dave, do you have any driver's side regulators? Doesn't matter on year, I will be removing the crank mechanism anyway to convert to power. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-19-2016, 06:18 PM	#85
TBohne Registered User Join Date: Feb 2016 Location: Anderson, Texas Posts: 295	Re: Part Out 72 C20 Interested in sway bar and brackets if you still have it, shipping to 77830

08-20-2016, 12:38 AM	#86
68Custom Hammer On! Join Date: Jul 2001 Location: Olathe, KS Posts: 473	Re: Part Out 72 C20 Do you have a panhard bar for sale? Mine is bent on my C20. Thanks, Aaron __________________ 1968 C20 Inline 6 250 SM465 4 speed 1968 K10 Inline 6 250 SM465 4 speed

08-20-2016, 10:56 AM	#88
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,455	Re: Part Out 72 C20 Dave, PM your payment info and I will get you paid. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-20-2016, 10:58 AM	#89
jr1000yarder Registered User Join Date: May 2016 Location: Pa Posts: 1,278	Re: Part Out 72 C20 I see a 69 grill on the wall................for sale??? __________________ IT IS WHAT IT IS

08-21-2016, 06:03 AM	#92
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,974	Re: Part Out 72 C20 do you have the steering coupler off the steering box?

08-21-2016, 04:25 PM	#93
Theboatandcarman Registered User Join Date: Aug 2015 Location: Harleysville, PA Posts: 398	Re: Part Out 72 C20 if its a coil spring c20 i need the rear 18"-2' of the frame (dont need crossmembers for easier shipping) also need a 72 complete accelerator pedal thanks!

08-24-2016, 11:42 AM	#94
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,455	Re: Part Out 72 C20 Dave, received the regulator today. Thanks again, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

08-27-2016, 07:30 PM	#96
jr1000yarder Registered User Join Date: May 2016 Location: Pa Posts: 1,278	Re: Part Out 72 C20 Any news on the grill? ? How about a core support __________________ IT IS WHAT IT IS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.