MO Parting out 67 C20, very well optioned. - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Never enough · 11-07-2017, 09:04 AM

Quote:

Originally Posted by Never enough

Hard to judge how tight they are from pics but they appear to be better than the ones on the truck. I'll get them, but did you see my other question about a left door actuator and handle ? Handle is for a '69.

If you pull the springs and fold the hinges, they fit in a much smaller box...

Hinges arrived yesterday. Already on and a huge improvement in hood alignment !!

DoneonOT · 11-07-2017, 10:49 AM

Interior door handles? Do you have any?

**Jeff's bowtie's** · 11-07-2017, 11:05 AM

Fred I'm looking for a good uncut engine harness for a 68 (gauge dash not lights) thanks

**specialtyretail** · 11-07-2017, 11:44 AM

Quote:

Originally Posted by Never enough

Hinges arrived yesterday. Already on and a huge improvement in hood alignment !!

Great, glad to hear it. Thanks, Fred.

**specialtyretail** · 11-07-2017, 11:45 AM

Quote:

Originally Posted by DoneonOT

Interior door handles? Do you have any?

I MAY have some odd and ends lying around. Nothing nice though. Thanks, Fred.

**specialtyretail** · 11-07-2017, 11:46 AM

Quote:

Originally Posted by Jeff's bowtie's

Fred I'm looking for a good uncut engine harness for a 68 (gauge dash not lights) thanks

How quick are you needing it? I am going to TRY and start on the C30 Sunday. Thanks, Fred.

dfwright · 11-07-2017, 05:46 PM

Fred, I thought I'd remind you that I'm still in the market for a heater control, if you come across one in fair condition.

**specialtyretail** · 11-07-2017, 06:46 PM

Quote:

Originally Posted by dfwright

Fred, I thought I'd remind you that I'm still in the market for a heater control, if you come across one in fair condition.

Yes sir, if i find a good one, you will be the first to know. Thanks, Fred.

Never enough · 11-07-2017, 06:54 PM

Quote:

Originally Posted by specialtyretail

How quick are you needing it? I am going to TRY and start on the C30 Sunday. Thanks, Fred.

C30 have fender emblems ?

**specialtyretail** · 11-07-2017, 07:49 PM

Quote:

Originally Posted by Never enough

C30 have fender emblems ?

I will look Wednesday. Thanks, Fred.

**inline67c20** · 11-08-2017, 05:02 PM

Fred, could I get the ram horns and heat shields

**specialtyretail** · 11-08-2017, 05:29 PM

Quote:

Originally Posted by inline67c20

Fred, could I get the ram horns and heat shields

I have the heat shields listed here on the forum. I have not pulled the manifolds yet. How quickly are you needing them? Thanks, Fred.

**inline67c20** · 11-08-2017, 05:56 PM

Quote:

Originally Posted by specialtyretail

I have the heat shields listed here on the forum. I have not pulled the manifolds yet. How quickly are you needing them? Thanks, Fred.

I am not in big hurry, when you get to them would be fine.

greywurm · 11-08-2017, 10:52 PM

Just checking in case you missed the request for the carrier bearing mount. I didn't see an answer either way. Thanks

unclefreddy · 11-09-2017, 06:23 PM

Hi Fred, I need the "guts" to the horn button inside the steering wheel. If you do ..... how much $$$$ Thanks, Rick

**specialtyretail** · 11-10-2017, 12:44 AM

Quote:

Originally Posted by greywurm

Just checking in case you missed the request for the carrier bearing mount. I didn't see an answer either way. Thanks

Sorry, I did miss it. Let me check Saturday if that works for you. Thanks, Fred.

**specialtyretail** · 11-10-2017, 07:55 PM

Quote:

Originally Posted by Never enough

C30 have fender emblems ?

I am sorry. I have not been to the shop in daylight hours since Tuesday. I will look and get you some pics Saturday. Thanks, Fred.

greywurm · 11-10-2017, 09:00 PM

Quote:

Originally Posted by specialtyretail

Sorry, I did miss it. Let me check Saturday if that works for you. Thanks, Fred.

That is fine. Thanks.

unclefreddy · 11-11-2017, 12:23 AM

Quote:

Originally Posted by unclefreddy

Hi Fred, I need the "guts" to the horn button inside the steering wheel. If you do ..... how much $$$$ Thanks, Rick

I also need the spacer for the ignition switch (1967)

**specialtyretail** · 11-13-2017, 01:52 PM

Quote:

Originally Posted by Jeff's bowtie's

Fred I'm looking for a good uncut engine harness for a 68 (gauge dash not lights) thanks

I checked, I cannot help you. Thanks, Fred.

**Jeff's bowtie's** · 11-13-2017, 02:40 PM

Ok thanks anyway Fred

greywurm · 11-14-2017, 01:01 PM

Quote:

Originally Posted by specialtyretail

Sorry, I did miss it. Let me check Saturday if that works for you. Thanks, Fred.

Just checking if you had a chance. Thanks.

**specialtyretail** · 11-14-2017, 03:37 PM

Quote:

Originally Posted by greywurm

Just checking if you had a chance. Thanks.

I did, it does, now I just need to find my air chisel. Looks like it may be an issue getting to it, but I think i can get it done.

greywurm · 11-14-2017, 03:57 PM

Ok. Great. I'm not in a rush, just having a real hard time tracking that part down. Thanks again... I'll be patiently following the thread.

Never enough · 11-15-2017, 08:57 AM

Quote:

Originally Posted by Never enough

C30 have fender emblems ?

Quote:

Originally Posted by specialtyretail

I am sorry. I have not been to the shop in daylight hours since Tuesday. I will look and get you some pics Saturday. Thanks, Fred.

Did you get time to look at these ?
Thanks

11-07-2017, 10:49 AM	#77
DoneonOT Registered User Join Date: May 2016 Location: Pleasant prairie, wi Posts: 32	Re: Parting out 67 C20, very well optioned. Interior door handles? Do you have any?

11-07-2017, 11:05 AM	#78
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,936	Re: Parting out 67 C20, very well optioned. Fred I'm looking for a good uncut engine harness for a 68 (gauge dash not lights) thanks

11-07-2017, 05:46 PM	#82
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,374	Re: Parting out 67 C20, very well optioned. Fred, I thought I'd remind you that I'm still in the market for a heater control, if you come across one in fair condition. __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

11-08-2017, 05:02 PM	#86
inline67c20 Junior Member Join Date: Apr 2015 Location: Bremerton, washington Posts: 79	Re: Parting out 67 C20, very well optioned. Fred, could I get the ram horns and heat shields

11-08-2017, 10:52 PM	#89
greywurm Registered User Join Date: Jun 2014 Location: Temecula Posts: 227	Re: Parting out 67 C20, very well optioned. Just checking in case you missed the request for the carrier bearing mount. I didn't see an answer either way. Thanks __________________ 71 Long bed C10 w/68 front clip, 350 SBC+HEI, TH350 06 Yukon XL Denali - Stock

11-09-2017, 06:23 PM	#90
unclefreddy Registered User Join Date: Jun 2013 Location: ukiah, california Posts: 333	Re: Parting out 67 C20, very well optioned. Hi Fred, I need the "guts" to the horn button inside the steering wheel. If you do ..... how much $$$$ Thanks, Rick

11-13-2017, 02:40 PM	#96
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,936	Re: Parting out 67 C20, very well optioned. Ok thanks anyway Fred

11-14-2017, 03:57 PM	#99
greywurm Registered User Join Date: Jun 2014 Location: Temecula Posts: 227	Re: Parting out 67 C20, very well optioned. Ok. Great. I'm not in a rush, just having a real hard time tracking that part down. Thanks again... I'll be patiently following the thread. __________________ 71 Long bed C10 w/68 front clip, 350 SBC+HEI, TH350 06 Yukon XL Denali - Stock

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.