Do you need '64-'66 Chevy Truck Parts?

[LILRED66]

Originally Posted by creep

I'm looking for a transmission hump cover for my '63 GMC with 4 speed and tranny mounted hand brake.

I have a few. Do you also need the front tranny hump extension panel, that bridges the gap between the primary tranny hump cover and the firewall?

Let me know and I will reply accordingly.

[Envy]

how bout an A/C insert that replaces the ash tray? dads got a truck with one in it but i hate to take it out and i want one.

[rselvey]

Would you happen to have the front right and left turn signal assembly for a 66 GMC .They are located the hood.

[creep]

Originally Posted by LILRED66

I have a few. Do you also need the front tranny hump extension panel, that bridges the gap between the primary tranny hump cover and the firewall?

Let me know and I will reply accordingly.

Just the cover. My zip is 44035

[198plus]

Tony I received my parts today.........It was great doing business with you.

Thanks, Ronnie

[TwoFiftyShifter]

Hey tony, how about an original 3 on the column shift knob? I don't like the look of any aftermarket ones, just the little black knob that came stock.... Have any???

[Greg63]

Tony, I pm'ed you a day ago - did you get it?
Greg

[wrench_65]

wondering if you have any grill supports for a 65....

[wrench_65]

hey tony seen the pic of the grill support would like to get how much???

[Jakes-66-K10]

Originally Posted by LILRED66

I have a few. A good, used big back window cab section is $250.00, minus the glass. The panel consists of the top, rear 1/4 of the cab, so packaging & shipping is a little pricey. I estimate it to be $125.00-$150.00, via UPS-Ground or Greyhound Freight.

Thanks for the opportunity and let me know your thoughts.

So, just to be clear you only sell the entire top rear of the cab, not just the inner panel of a big back window? This picture should show an example of what I'm looking for, want to use the inner panel from a BBW so that I can cut my outer panel to the size needed. Hopefully it'd make it a little lighter and less bulky for you to ship it.

[LILRED66]

Originally Posted by Envy

how bout an A/C insert that replaces the ash tray? dads got a truck with one in it but i hate to take it out and i want one.

I have one left in my inventory. It is in very good, used condition. It is $125.00, plus $13.00 shipping, via USPS-Priority Mail.

Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

Happy Holidays.

[LILRED66]

Originally Posted by rselvey

Would you happen to have the front right and left turn signal assembly for a 66 GMC .They are located the hood.

Thanks for the inquiry. I have the park lamp assemblies for a '66 GMC truck hood. They are $90.00, including shipping, via USPS-Priority Mail.

Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

Happy Holidays.

[LILRED66]

Originally Posted by creep

Just the cover. My zip is 44035

A good, used high hump tranny cover is $80.00, including shipping, via UPS-Ground. I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net and money orders at the address in my signature.

Thanks for the opportunity and let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future.

Happy Holidays.

[LILRED66]

Originally Posted by 198plus

Tony I received my parts today.........It was great doing business with you.

Thanks, Ronnie

Ronnie:

I appreciate your business and I will ship the Pitman arm and steering shaft "D" coupler on Monday.

Happy Holidays.

[LILRED66]

Originally Posted by TwoFiftyShifter

Hey tony, how about an original 3 on the column shift knob? I don't like the look of any aftermarket ones, just the little black knob that came stock.... Have any???

Thanks for the inquiry. I have a few. They are $12.00, including shipping. I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net or money orders at the address in my signature.

Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

Happy Holidays.

[LILRED66]

Originally Posted by Greg63

Tony, I pm'ed you a day ago - did you get it?
Greg

Greg:

I received your PM and I have replied, so let me know if I can help you with some good, used '60-'63 Chevy truck chrome/black knobs.

Thanks for the opportunity and Happy Holidays.

[LILRED66]

Originally Posted by wrench_65

hey tony seen the pic of the grill support would like to get how much???

Thanks for the inquiry. A good, used 4-5-6 Chevy truck grille support is $125.00, plus $35.00 packaging & shipping, via UPS-Ground.

I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net or money order at the address in my signature.

Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

Happy Holidays.

[LILRED66]

Originally Posted by vortexofpain

So, just to be clear you only sell the entire top rear of the cab, not just the inner panel of a big back window? This picture should show an example of what I'm looking for, want to use the inner panel from a BBW so that I can cut my outer panel to the size needed. Hopefully it'd make it a little lighter and less bulky for you to ship it.

I sell the entire top, rear quarter, because most buyers do not want to pay the labor to disect the assembly, to acquire only the piece/pieces needed to do the conversion.

I am flexible, but the cost for specific panels is a different price than the entire top rear quarter section, due to the amount of time involved, to carefully take it apart properly and without damaging it.

[creep]

PM sent.

[Turkey]

Do you have the wires for connecting the backup lights?

[Gemner]

Im in need of the throwout bearing shaft from a 3 on the tree, the bolt on part pictured below (not the exact part, just the same idea)

[LILRED66]

Originally Posted by creep

PM sent.

Thanks for the inquiry. I replied to your PM. Happy Holidays.

[LILRED66]

Originally Posted by Turkey

Do you have the wires for connecting the backup lights?

Thanks for the inquiry. I sent you a PM regarding this item. Happy Holidays.

[LILRED66]

Originally Posted by Gemner

Im in need of the throwout bearing shaft from a 3 on the tree, the bolt on part pictured below (not the exact part, just the same idea)

Thanks for the inquiry. I have a few factory 3-speed column shift trannies, so I am sure I have what you need, however I will need to double-check my inventory, to make sure.

Happy Holidays.

[Gemner]

Originally Posted by LILRED66

Thanks for the inquiry. I have a few factory 3-speed column shift trannies, so I am sure I have what you need, however I will need to double-check my inventory, to make sure.

Happy Holidays.

ok sounds good, thanks