Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy - Page 41 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68Timber · 03-25-2013, 07:12 PM

Mike, I guess I missed this tidbit - are y'all having to move the truck and tools + the household goods or is the truck staying where it is for now?

**67cheby** · 03-26-2013, 09:35 AM

Quote:

Originally Posted by BRUISER

Mike, I guess I missed this tidbit - are y'all having to move the truck and tools + the household goods or is the truck staying where it is for now?

Yes moving houses, we sold ours and we are renting until I can find what I need (a place with a shop or land to build a house and shop) No the truck is still at my buddy Chip's (Tireblazin) shop

**67cheby** · 03-26-2013, 09:38 AM

Here are a few pictures from Sunday and Monday we have been setting up the Scott's Super Slam rear 4 link ! Ride height is frame rails 4 inches off of the ground, full lift 6 inches off the ground. I will finish welding inside the brackets when I flip it all over to do the bottom sides !

**67cheby** · 03-26-2013, 09:42 AM

Next we started working on the rear upper bag brackets, setting the Firestone F9000 bags at 9.25 inches at ride height, hoping that will be hitting that "sweet spot" for the ride quality

**67cheby** · 03-26-2013, 09:44 AM

Next started working on mounting the AFCO shocks

6772owner · 03-26-2013, 09:53 AM

Looking good buddy, cant wait to see the front completed!

**oldman3** · 03-26-2013, 09:55 AM

Looking good Mike....Jim

raull · 03-26-2013, 09:55 AM

Looks killer bud !!!
Posted via Mobile Device

**67cheby** · 03-26-2013, 10:00 AM

Quote:

Originally Posted by 6772owner

Looking good buddy, cant wait to see the front completed!

lol....my A D D .....switched me to the back !

Quote:

Originally Posted by oldman3

Looking good Mike....Jim

thanks Jim

Quote:

Originally Posted by raull

Looks killer bud !!!
Posted via Mobile Device

Thanks Raull

**67cheby** · 03-26-2013, 10:06 AM

I also picked up a LS1 intake with throttle body, still need an oil pan

Rusbuilt · 03-26-2013, 11:56 AM

Very nice sir, you're moving right along!

jlsanborn · 03-26-2013, 12:47 PM

That's some good progress. Nice work!

**67cheby** · 03-27-2013, 09:10 AM

built some upper bag bracket gussets last night

Zoomin · 03-27-2013, 09:39 AM

Nice touch there, Mike!
Posted via Mobile Device

**oldman3** · 03-27-2013, 09:43 AM

Looking good Mike,moving right along...Jim

jkeating1 · 03-27-2013, 09:45 AM

Man that looks sweet! And well out of the way of a loose driveshaft, too!

Sorry, I couldn't stop myself!

**67cheby** · 03-27-2013, 09:48 AM

Quote:

Originally Posted by Zoomin

Nice touch there, Mike!
Posted via Mobile Device

thanks !

Quote:

Originally Posted by oldman3

Looking good Mike,moving right along...Jim

we are ! finally

Quote:

Originally Posted by jkeating1

Man that looks sweet! And well out of the way of a loose driveshaft, too!

Sorry, I couldn't stop myself!

LOL....OUCH !

**superflysteiny** · 03-27-2013, 11:52 AM

looks good buddy

gringoloco · 03-27-2013, 12:03 PM

6" locked-up? Speed bump dodger

Shocks upside-down for a reason?

**67cheby** · 03-27-2013, 12:20 PM

Quote:

Originally Posted by superflysteiny

looks good buddy

thanks !

Quote:

Originally Posted by gringoloco

6" locked-up? Speed bump dodger

Shocks upside-down for a reason?

LOL....yep 6 inches at full lift, she's a LOW-RIDER !!! And yes the shocks were upside down for a reason but AFCO actually can be ran that way if you want to , we are getting different shocks though these don't have enough travel .

fastcam1 · 03-27-2013, 09:25 PM

Looks good Mike
Posted via Mobile Device

rhd_c10 · 03-28-2013, 07:19 AM

what Serpentine system are you going to run.. with the ls1 intake it wont clear the alternator.. i got a set up from dirtydingo.. its clean, simple, and cheap.. check it out on my truck.. im at work so cant post it on here, no access to photobucket..

Jonboy · 03-28-2013, 10:01 AM

Which oil pan are you looking for Mike?

mooseknuckles · 03-28-2013, 10:09 AM

you could always run an f-body h2o pump, and get the oil pan too...

**67cheby** · 03-28-2013, 10:25 AM

Quote:

Originally Posted by fastcam1

Looks good Mike
Posted via Mobile Device

thanks man

Quote:

Originally Posted by rhd_c10

what Serpentine system are you going to run.. with the ls1 intake it wont clear the alternator.. i got a set up from dirtydingo.. its clean, simple, and cheap.. check it out on my truck.. im at work so cant post it on here, no access to photobucket..

Looks like I am going with Eddie Motorsports S drive system !

Quote:

Originally Posted by Jonboy

Which oil pan are you looking for Mike?

Fbody I believe unless someone has another idea ?

Quote:

Originally Posted by mooseknuckles

you could always run an f-body h2o pump, and get the oil pan too...

??? I don't know what that is ?

03-25-2013, 07:12 PM	#1001
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Mike, I guess I missed this tidbit - are y'all having to move the truck and tools + the household goods or is the truck staying where it is for now? __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

03-26-2013, 09:38 AM	#1003
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Here are a few pictures from Sunday and Monday we have been setting up the Scott's Super Slam rear 4 link ! Ride height is frame rails 4 inches off of the ground, full lift 6 inches off the ground. I will finish welding inside the brackets when I flip it all over to do the bottom sides ! Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-26-2013, 09:42 AM	#1004
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Next we started working on the rear upper bag brackets, setting the Firestone F9000 bags at 9.25 inches at ride height, hoping that will be hitting that "sweet spot" for the ride quality Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-26-2013, 09:44 AM	#1005
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Next started working on mounting the AFCO shocks Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-26-2013, 09:53 AM	#1006
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Looking good buddy, cant wait to see the front completed! __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644

03-26-2013, 09:55 AM	#1007
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Looking good Mike....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

03-26-2013, 09:55 AM	#1008
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Looks killer bud !!! Posted via Mobile Device __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

03-26-2013, 10:06 AM	#1010
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy I also picked up a LS1 intake with throttle body, still need an oil pan Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172 Last edited by 67cheby; 03-26-2013 at 10:37 AM.

03-26-2013, 11:56 AM	#1011
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Very nice sir, you're moving right along! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-26-2013, 12:47 PM	#1012
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy That's some good progress. Nice work! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

03-27-2013, 09:10 AM	#1013
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy built some upper bag bracket gussets last night Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-27-2013, 09:39 AM	#1014
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Nice touch there, Mike! Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

03-27-2013, 09:43 AM	#1015
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Looking good Mike,moving right along...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

03-27-2013, 09:45 AM	#1016
jkeating1 Registered User Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Man that looks sweet! And well out of the way of a loose driveshaft, too! Sorry, I couldn't stop myself! __________________ JK

03-27-2013, 11:52 AM	#1018
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy looks good buddy __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell



Register or Log In To remove these advertisements.

03-27-2013, 12:03 PM	#1019
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy 6" locked-up? Speed bump dodger Shocks upside-down for a reason? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

03-27-2013, 09:25 PM	#1021
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Looks good Mike Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

03-28-2013, 07:19 AM	#1022
rhd_c10 Registered User Join Date: May 2011 Location: Avondale,az Posts: 169	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy what Serpentine system are you going to run.. with the ls1 intake it wont clear the alternator.. i got a set up from dirtydingo.. its clean, simple, and cheap.. check it out on my truck.. im at work so cant post it on here, no access to photobucket.. __________________ my rhd build.. http://67-72chevytrucks.com/vboard/s...d.php?t=468712 1964 CHEVROLET BISCAYNE 350CI/TH-350 1968 CHEVROLET C-10 SWB LS1/4L60E

03-28-2013, 10:01 AM	#1023
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Which oil pan are you looking for Mike?

03-28-2013, 10:09 AM	#1024
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy you could always run an f-body h2o pump, and get the oil pan too... __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.