How about some pics of bagged C-10's

[ctpchevy]

Originally Posted by belowme51

how much do you think it would cost to have a fabricator do this down to bare metal not paint or body just like in the pics. or how many hrs did it take you do do this one?

well i would prob charge about 500 i actually have a hood i can do just not sure what shipping would cost but they do take some hours to do cause you really have to go slow to avoid warping where are you located ??? i see nv im guessing vegas i actually think im coming there in a few months

[ctpchevy]

thanks everyone i tried posting some pics of the hood on the build page and it didnt work ill try again but i took a inch out and laid it down to kinda match the winshield angle it gives it a sleek look maybe someday ill actually finish her hahaha she has been a long on going project but i have some plans and some ideas that i want to do but i will keep it looking factory thats what we were all about at IFcustoms but if anyone has any questions feel free i have done a bunch of these trucks all the way from what mine is chopped and cut off at the door to just laying frame oh and the last c10 i posted is lil chris truck its one of the sickest c10s i have seen its chopped more and has a section as well it sits about 2-3 inches lower than mine

[Strodder]

Originally Posted by ctpchevy

thanks everyone i tried posting some pics of the hood on the build page and it didnt work ill try again but i took a inch out and laid it down to kinda match the winshield angle it gives it a sleek look maybe someday ill actually finish her hahaha she has been a long on going project but i have some plans and some ideas that i want to do but i will keep it looking factory thats what we were all about at IFcustoms but if anyone has any questions feel free i have done a bunch of these trucks all the way from what mine is chopped and cut off at the door to just laying frame oh and the last c10 i posted is lil chris truck its one of the sickest c10s i have seen its chopped more and has a section as well it sits about 2-3 inches lower than mine

You guys did some awesome work at IF Customs. All the local air bag guys were butchers, except you guys. And me of course. I was Sportruck Specialties in Simi Valley.

[ctpchevy]

I have a couple build threads on here I just don't know how to post the link lol one is called my 70 chevy I'll take some more pics of the hood today I'll be out in the garage I just got to scotch bright the hood a bit and knock some rust off lol

Yea Lil chris moved up to oreogon I haven't talked to him for a while I don't think he has worked on the truck at all
Posted via Mobile Device

[ctpchevy]

here is the link to one of my threads i dont know how to put all the links

http://67-72chevytrucks.com/vboard/s...d.php?t=457125

[ctpchevy]

here is another c10 im working on

http://67-72chevytrucks.com/vboard/s...d.php?t=456917

[Mad Rods]

Is that pewter c10 Z'd or Dropmembered ?
Posted via Mobile Device

[ctpchevy]

its actually just layin frame no z and no drop memeber i did 2.5 inch drop spindles and just the 2600lb fire stone bags and the back just has a small c notch i which iwish would of gone bigger now but i dont want to do it over since my cousin bought the but im gonna be redoing my dads truck here in a few months and he gave me the go ahead to z the frame now and ill prob build a back half nothing like having your dad ask if i can make it go lower hahah

[streetsteel]

Her are my 2 toys.

[ctpchevy]

the green one is my pops truck i forgot to write that lol

[tr69c10]

How far is your shop from Vegas I'll be going there soon

[ctpchevy]

well im in gardnerville which is 10 hours from vegas and i actually dont have a shop i just mess around in the garage lol

[64shortc10]

Bagged c10's from DANGERZONE 2011
Tony from Norcal

[64shortc10]

More pics
Tony from Norcal

[64shortc10]

more!
Tony from Norcal

[64shortc10]

Last one!
Tony from Norcal

[camaro__thunder]

Originally Posted by ctpchevy

well im in gardnerville which is 10 hours from vegas and i actually dont have a shop i just mess around in the garage lol

Whats up Travis? Its been a long time since I talked to you.

[ctpchevy]

Originally Posted by camaro__thunder

Whats up Travis? Its been a long time since I talked to you.

yea this is travis who is this ??????

[leftcoast66]

Originally Posted by ctpchevy

yea this is travis who is this ??????

Kind of funny you're on here now. You probably don't remember me but I met you at Hot August Nights back in I believe 06 when they did the whole cruise through the parking lot. Its the truck that got me into bags. Glad to see you're still around.

[ctpchevy]

Originally Posted by leftcoast66

Kind of funny you're on here now. You probably don't remember me but I met you at Hot August Nights back in I believe 06 when they did the whole cruise through the parking lot. Its the truck that got me into bags. Glad to see you're still around.

oh yea i remember you hahaha thats funny yea that was a long time ago yea im still around still building junk im a washed up truck builder hahahaha but i still got that c10 as well are you gonna make it to hot agust night this year ????? but yea im on here now i never did it but there allot of nice stuff on here so i thought i would show the junk i got lol

[kev2809]

nice rides! thanks for postin em

[tuckin55]

[shortbed70]

Heres the most recent of mine...Ride height! Down 4-5 in the front and 2 in the rear to lay

[Strodder]

To lay what? Is it air bagged?

[shortbed70]

Originally Posted by Strodder

To lay what? Is it air bagged?

Yea its bagged setting at ride height in the pic on a jack. I still have to finish fabbing EDC mount and run 3 lines and hook up electrical. Lay out is what I refer to as low as it can go. Its mostly stock upper lowers no notching or sectioning just a small notch in the rear and stock bed floor.