New Project truck!! - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Crank · 08-22-2005, 08:47 PM

Ah, yea, forgot about it being a stepside... But I'm glad that you are doing up a stepside... I'm glad I'm close to ya, cuz when you get it done, guess I'll be hittin 71 and comin down to see it. I'm kinda messin with my truck, but it aint gonna be nowhere near nice like yours.
Brandon

phantom dually · 08-22-2005, 09:28 PM

Quote:

Originally Posted by Crank

Ah, yea, forgot about it being a stepside... But I'm glad that you are doing up a stepside... I'm glad I'm close to ya, cuz when you get it done, guess I'll be hittin 71 and comin down to see it. I'm kinda messin with my truck, but it aint gonna be nowhere near nice like yours.
Brandon

What do you have in the works??

Grande Rojo · 08-22-2005, 09:40 PM

Looking good. I like what you did with the bed!!

Crank · 08-22-2005, 11:21 PM

I aint really got anything in the works. I've just simply been messing with my stock ass truck. As it sets, it has 4.3 vortec, with 5 speed. I wanna static drop it, and have 'er riding on 18's, til I get it payed off. Then probably cut it up... But soon enough, shave the 3rd brake light, roll pan, molded tailgate, antenna, I just want a simple clean truck, then when I pay it off. Get a hole buncha power like you're gettin. I'm tellin ya, I'm green man.
Brandon

PS... That truck is my model. Mine is stock height, with 15x8 black rallys... Mine looks the same as that, except mine has black mirrors, chrome bumper and still has the molding for a while. Those are the wheels I want too.

phantom dually · 09-05-2005, 04:14 PM

Got a few more updates. Truck is finally on the ground with all four wheels and tires. Got the ladder bars set in the rear and the pinion angles. Still have to do some leveling with the coilovers in the rear. The front should settle down around 1.5" with the BBC496. Pressure washed the bed and used spray in bedliner to coat the bottom of it. Turned out pretty well. I have unitl the 24th of Sept to get it drivable for a local show. The truck will not be finished by no means but you have to set yourself some goals!! Ordered a new grille and headlights. Got the grille to do, front bumper, exhaust and putting the gas tank temporarily in the bed. I want to buff the truck out as good as possible as well. (PAINT SUX ON THIS THING) PICS LATER!!

SCOTI · 09-05-2005, 07:00 PM

Quote:

Originally Posted by phantom dually

Got a few more updates. ..... PICS LATER!!

Your killin' us!

phantom dually · 09-05-2005, 09:49 PM

OK here are the pics!! AS PROMISED!!

SCOTI · 09-05-2005, 11:06 PM

Tissue please.

What brand were the rear rollers?

phantom dually · 09-05-2005, 11:08 PM

Quote:

Originally Posted by SCOTI

Tissue please.

What brand were the rear rollers?

I'll take that as a compliment!! Wheels are Bonspeed and tires in rear are Michelin pilot sport 2 335/30/20

SCOTI · 09-05-2005, 11:48 PM

Yes, it's definitely a compliment. I'll write down the tire info this time . . .... I swear.

phantom dually · 09-05-2005, 11:49 PM

Its in the sig!! You cant loose it!!

SCOTI · 09-06-2005, 12:25 AM

Quote:

Originally Posted by phantom dually

Its in the sig!! You cant loose it!!

Wheel manufacturer, size, & tire size . . .... yes. Tire manufacturer, no

. I wrote it down before when I looked up similar sizes but I cant find it now.

Crank · 09-06-2005, 01:35 AM

I like that fat ass... Kinda reminds me of a girl I know, only I like yours better.
Brandon

phantom dually · 09-07-2005, 12:21 AM

here are a few updates.

Kevin45 · 09-07-2005, 08:20 AM

Looks sweet

I really like the look of the big hides on the rear shot. What plans you have for changing the looks of the front of the truck? BTW...is that your garage speakers for the stereo in the garage that is showing to the left of the truck. I bet the neighbors appreciate that cranked up while working late nights out there

phantom dually · 09-07-2005, 06:12 PM

Quote:

Originally Posted by Kevin45

Looks sweet

I really like the look of the big hides on the rear shot. What plans you have for changing the looks of the front of the truck? BTW...is that your garage speakers for the stereo in the garage that is showing to the left of the truck. I bet the neighbors appreciate that cranked up while working late nights out there

No the speakers are for a friends Navigator. The front end will be getting a new grill before the end of the month. Gonna keep it a suprise!!

phantom dually · 09-09-2005, 09:07 PM

ITS ALIVE!! Got the gas lines plumbed into the bed. Right now I am running the stock tank. I still have the 350 in there so Fuel injection runs on a diffrent fuel pump VS the CARB 496 I will be running. Fired right up after sittin for 6+ months!! Got a few other things done today but no PICS as there is nothing to post.

driver64 · 09-10-2005, 12:25 AM

your truck is BAD A$$!!! keep up the good work

phantom dually · 09-10-2005, 11:37 PM

Ok I got the mirrors on. Secured the lines to the gas tank. I had to lengthin the wires to the brake light harness. Got everything done and sat it on the ground. Did a little burnout on the nice slick floor!! Tommorow I will go for a test drive.

phantom dually · 09-10-2005, 11:38 PM

Oh and yes I know the front end is higher than the back. The springs will settle some and the weight of the Big Block will bring it down some too.

SCOTI · 09-11-2005, 01:25 PM

Let us know how that 1st drive goes.

phantom dually · 09-11-2005, 06:07 PM

Well the drive went good I think!! I took it about a 1/2 mile and turned around and came back. Everything feels ok. Truck didnt even pull to my surprise. I still have to get the front end aligned ASAP. I expected it to be way off as EVERY single part of the front end is new. I just backed it into the garage. Im going to let it cool down a minute then crawl under and check all the bolts and brake line fittings.

SCOTI · 09-11-2005, 10:05 PM

Cool. BTW . . .... those mirrors made a big difference.

phantom dually · 09-11-2005, 10:10 PM

Yeah now to clean it up a bit. I noticed the front rotors are puttin off some shavings. I have new Powerslot rotors and Hawk pads up front. I think it just the pads seatin in?? Also one side of the truck is sittin 1/2" lower in the front than the other. I guess Im gonna pull the wheels and check the rotors and the way the spring is turned in the a arms.

phantom dually · 09-18-2005, 10:18 PM

Got the new grill in this weekend. I have a checkmate fiberglass cover that I am going to attempt to cut down to fit this truck. It was originally for my 83 Long bed. Did another test drive and took truck to get front end aligned. SO far so good. Going to buff the paint during the week and clean it up some more. Also got a optima battery at Autozone.

08-22-2005, 09:40 PM	#103
Grande Rojo paper or plastic? Join Date: Nov 2002 Location: SW Missouri Posts: 671	Looking good. I like what you did with the bed!! __________________ 1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388

08-22-2005, 11:21 PM	#104
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	I aint really got anything in the works. I've just simply been messing with my stock ass truck. As it sets, it has 4.3 vortec, with 5 speed. I wanna static drop it, and have 'er riding on 18's, til I get it payed off. Then probably cut it up... But soon enough, shave the 3rd brake light, roll pan, molded tailgate, antenna, I just want a simple clean truck, then when I pay it off. Get a hole buncha power like you're gettin. I'm tellin ya, I'm green man. Brandon PS... That truck is my model. Mine is stock height, with 15x8 black rallys... Mine looks the same as that, except mine has black mirrors, chrome bumper and still has the molding for a while. Those are the wheels I want too. Attached Images

09-05-2005, 04:14 PM	#105
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Got a few more updates. Truck is finally on the ground with all four wheels and tires. Got the ladder bars set in the rear and the pinion angles. Still have to do some leveling with the coilovers in the rear. The front should settle down around 1.5" with the BBC496. Pressure washed the bed and used spray in bedliner to coat the bottom of it. Turned out pretty well. I have unitl the 24th of Sept to get it drivable for a local show. The truck will not be finished by no means but you have to set yourself some goals!! Ordered a new grille and headlights. Got the grille to do, front bumper, exhaust and putting the gas tank temporarily in the bed. I want to buff the truck out as good as possible as well. (PAINT SUX ON THIS THING) PICS LATER!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

09-05-2005, 09:49 PM	#107
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	OK here are the pics!! AS PROMISED!! Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

09-05-2005, 11:06 PM	#108
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Tissue please. What brand were the rear rollers? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

08-22-2005, 08:47 PM	#101
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	Ah, yea, forgot about it being a stepside... But I'm glad that you are doing up a stepside... I'm glad I'm close to ya, cuz when you get it done, guess I'll be hittin 71 and comin down to see it. I'm kinda messin with my truck, but it aint gonna be nowhere near nice like yours. Brandon

09-05-2005, 11:48 PM	#110
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Yes, it's definitely a compliment. I'll write down the tire info this time . . .... I swear. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

09-05-2005, 11:49 PM	#111
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Its in the sig!! You cant loose it!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

09-06-2005, 01:35 AM	#113
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	I like that fat ass... Kinda reminds me of a girl I know, only I like yours better. Brandon

09-07-2005, 12:21 AM	#114
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	here are a few updates. Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 Last edited by phantom dually; 09-07-2005 at 12:23 AM.

09-07-2005, 08:20 AM	#115
Kevin45 Registered User Join Date: Oct 2004 Location: Urbana, Ohio Posts: 591	Looks sweet I really like the look of the big hides on the rear shot. What plans you have for changing the looks of the front of the truck? BTW...is that your garage speakers for the stereo in the garage that is showing to the left of the truck. I bet the neighbors appreciate that cranked up while working late nights out there __________________ '93 Silverado Reg. Cab Shortbox .060 over 350 Quick and fun!!!

09-09-2005, 09:07 PM	#117
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	ITS ALIVE!! Got the gas lines plumbed into the bed. Right now I am running the stock tank. I still have the 350 in there so Fuel injection runs on a diffrent fuel pump VS the CARB 496 I will be running. Fired right up after sittin for 6+ months!! Got a few other things done today but no PICS as there is nothing to post. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

09-10-2005, 12:25 AM	#118
driver64 Registered User Join Date: Feb 2005 Location: Saskatchewan Canada Posts: 112	your truck is BAD A$$!!! keep up the good work

09-10-2005, 11:37 PM	#119
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Ok I got the mirrors on. Secured the lines to the gas tank. I had to lengthin the wires to the brake light harness. Got everything done and sat it on the ground. Did a little burnout on the nice slick floor!! Tommorow I will go for a test drive. Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

09-10-2005, 11:38 PM	#120
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Oh and yes I know the front end is higher than the back. The springs will settle some and the weight of the Big Block will bring it down some too. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448



Register or Log In To remove these advertisements.

09-11-2005, 01:25 PM	#121
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Let us know how that 1st drive goes. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

09-11-2005, 06:07 PM	#122
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Well the drive went good I think!! I took it about a 1/2 mile and turned around and came back. Everything feels ok. Truck didnt even pull to my surprise. I still have to get the front end aligned ASAP. I expected it to be way off as EVERY single part of the front end is new. I just backed it into the garage. Im going to let it cool down a minute then crawl under and check all the bolts and brake line fittings. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

09-11-2005, 10:05 PM	#123
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Cool. BTW . . .... those mirrors made a big difference. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

09-11-2005, 10:10 PM	#124
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Yeah now to clean it up a bit. I noticed the front rotors are puttin off some shavings. I have new Powerslot rotors and Hawk pads up front. I think it just the pads seatin in?? Also one side of the truck is sittin 1/2" lower in the front than the other. I guess Im gonna pull the wheels and check the rotors and the way the spring is turned in the a arms. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

09-18-2005, 10:18 PM	#125
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Got the new grill in this weekend. I have a checkmate fiberglass cover that I am going to attempt to cut down to fit this truck. It was originally for my 83 Long bed. Did another test drive and took truck to get front end aligned. SO far so good. Going to buff the paint during the week and clean it up some more. Also got a optima battery at Autozone. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.