Project: Bolt one on - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 07-12-2007, 07:45 PM

Start with a California 70 K5 tub and frame.

add 52" springs in the front and 56" springs in the rear, 6" of total lift.

Add a D60 front, 14B rear, 4.56 gears with Detroit lockers front and rear. High steer, a Black Box by Northwest fab and a NP205 with Furd guts behind a 4L60. 383 Vortec stroker for motivation.

Here's a few pics for Kurt:

vtblazer · 07-13-2007, 01:53 AM

Sure, looks like a good candidate.

Is this how it currently sits?
Would need a frame with mounts under it to do it right.

Nice parts list, is the 4L60 built?
What tire size is he going to run?

*FormerMember* · 07-13-2007, 06:50 AM

Quote:

Originally Posted by vtblazer

Sure, looks like a good candidate.

Is this how it currently sits?
Would need a frame with mounts under it to do it right.

Nice parts list, is the 4L60 built?
What tire size is he going to run?

Looks like it needs floor patches and possibly an outer rocker.

This is how it currently is.

Frame's in my yard, waiting to get sandblasted, hot dipped galvanized and painted.

4L60 is built, Corvette servos and all that crap. Going to run a 39.5" Pitbull Rocker on re-centered H1 rims.

vtblazer · 07-16-2007, 02:51 PM

Quote:

Originally Posted by grendel

Frame's in my yard, waiting to get sandblasted, hot dipped galvanized and painted.

It's be alot easier if it were on the frame as a roller with the body mounts installed.
Be better for fit and finish of the panels too.

I'll take Bill the pics, talk it over with him and we'll figure it out.

Nice trailer BTW.

*FormerMember* · 07-16-2007, 03:11 PM

Quote:

Originally Posted by vtblazer

It's be alot easier if it were on the frame as a roller with the body mounts installed.
Be better for fit and finish of the panels too.

I'll take Bill the pics, talk it over with him and we'll figure it out.

Nice trailer BTW.

We should have the frame(s) back from blast and paint shortly. So mounting it down onto a roller is not impossible. I get the other brackets and stuff I need to mount the suspension on Wednesday, according to the DHL website.

The trailer's a piece of 400.00 crap. It's what I paid for it, but it's good at holding the body tub up.

**Yukon Jack** · 07-13-2007, 11:46 AM

Looks like a good recipe!

*FormerMember* · 07-13-2007, 11:51 AM

Quote:

Originally Posted by Yukon Jack

Looks like a good recipe!

Thanks... it's been done before and when tuned works well.

Can you post those pictures back up on my other thread? I'd like to see that C/30 that was converted again. I am working on it, too.

**Yukon Jack** · 07-14-2007, 10:38 AM

Quote:

Originally Posted by grendel

Can you post those pictures back up on my other thread? I'd like to see that C/30 that was converted again. I am working on it, too.

My site has been down the last couple days and my very nice buddy who hosts it for free is on vacation - should be up in a day or two.

LUV2XCLR8 · 07-13-2007, 06:04 PM

Keep us posted

*FormerMember* · 07-14-2007, 10:06 PM

Got a box (108lbs !) of freight coming. Wanted to be ready...

IN order to fit the 52" springs in front, the original (and banged up) spring hangers in front need to come off, as does the body mount.

Gary and I got that done today. We also got the 1 ton frame ready to go and stacked both on top of the beater truck...

*FormerMember* · 07-15-2007, 11:20 AM

This is what goes in it's place:

1tonblaze · 07-15-2007, 12:08 PM

where did you get that front spring hanger from ???? looks like a off road design peice ????

*FormerMember* · 07-15-2007, 12:14 PM

Quote:

Originally Posted by 1tonblaze

where did you get that front spring hanger from ???? looks like a off road design peice ????

http://diy4x.com/suspension.htm

FGB52

Quote:

Originally Posted by DIY4X

We've designed a mounting kit for installing 52" springs on your first generation (69-72') fullsize Chevy or GMC. This is a more complete kit than our 2nd generation B52 kit as the modification is more extensive.

The kit includes, the front spring hangers, shackle eye hanger and 6" shackles standard as well as all the hardware required to make the swap, every bolt required is included!. Poly urethanes are included in the frame eye hanger. All you need to add is a pair of 52" springs!

Some modifications required to install this kit include, trimming of the forward cab mount and modifications to the shift linkage on automatic transmission trucks or better yet, cable shift it!

I don't think ORD does one of these.

Luba · 07-15-2007, 03:29 PM

Quote:

Originally Posted by grendel

http://diy4x.com/suspension.htm

FGB52

I don't think ORD does one of these.

How much was that kit and what is the benefit of it? I assume they are longer length front springs than stock for a better ride?

vtblazer · 07-16-2007, 06:28 AM

Hey Jon,
Was away for a few days, pm returned.

*FormerMember* · 07-16-2007, 08:17 AM

Quote:

Originally Posted by Luba

How much was that kit and what is the benefit of it? I assume they are longer length front springs than stock for a better ride?

Pricing and some information is right on that page you quoted

Yes, a longer spring is a flexier spring. Better ride, better traction. You also get 4" of lift out of stock spring. We're running a 2" Skyjacker for 6" of total lift.

msgross · 07-16-2007, 08:39 AM

should be a beast...

1tonblaze · 07-16-2007, 08:52 AM

wish i would have seen that before i got all my stuff for my blazer

*FormerMember* · 07-17-2007, 06:11 PM

Got the brackets in today... DHL really moves fast!

These things are HEAVY:

**Yukon Jack** · 07-18-2007, 09:28 AM

Definitely look heavy duty. How soon until you start getting them installed?

*FormerMember* · 07-18-2007, 09:39 AM

Quote:

Originally Posted by Yukon Jack

Definitely look heavy duty. How soon until you start getting them installed?

I should be picking up the frames and axles today from Blast and Paint.

I already have the old mounts off... I also have the springs, I'll need to assemble the axles.

Burt4x4 · 07-18-2007, 09:49 AM

Hey DOOOOD! Hope all is well!

So your building two rigs?

*FormerMember* · 07-18-2007, 10:00 AM

Quote:

Originally Posted by Burt4x4

Hey DOOOOD! Hope all is well!

So your building two rigs?

Heh, more than 2

. Things are awesome. Liking NH as we have family here, missing riding and some of my friends in CA.

Finishing up my Jeep.
Working on a K5.
Working on a K10.
Working on a K30.
Working on a Buggy.

The K10 and Buggy are for other folks... I am doing project management and grunt work on most of it.

Burt4x4 · 07-18-2007, 11:51 AM

WOW!
Mr. Project you are! hahaha

Well good! Glad to hear the EastCoast is doing you good!
Have Fun and best of luck with your 8million projects hahaaa

Burt

**Yukon Jack** · 07-31-2007, 09:59 AM

Frame looks incredible!!!

07-12-2007, 07:45 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Project: Bolt one on Start with a California 70 K5 tub and frame. add 52" springs in the front and 56" springs in the rear, 6" of total lift. Add a D60 front, 14B rear, 4.56 gears with Detroit lockers front and rear. High steer, a Black Box by Northwest fab and a NP205 with Furd guts behind a 4L60. 383 Vortec stroker for motivation. Here's a few pics for Kurt: Last edited by FormerMember; 04-02-2009 at 03:01 PM.

07-13-2007, 01:53 AM	#2
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Project: Bolt one on Sure, looks like a good candidate. Is this how it currently sits? Would need a frame with mounts under it to do it right. Nice parts list, is the 4L60 built? What tire size is he going to run?

07-13-2007, 11:46 AM	#6
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Project: Bolt one on Looks like a good recipe! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

07-13-2007, 06:04 PM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Project: Bolt one on Keep us posted __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-14-2007, 10:06 PM	#10
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	working on the frame today... Got a box (108lbs !) of freight coming. Wanted to be ready... IN order to fit the 52" springs in front, the original (and banged up) spring hangers in front need to come off, as does the body mount. Gary and I got that done today. We also got the 1 ton frame ready to go and stacked both on top of the beater truck... Last edited by FormerMember; 04-02-2009 at 03:01 PM.

07-15-2007, 11:20 AM	#11
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Project: Bolt one on This is what goes in it's place: Last edited by FormerMember; 07-15-2007 at 11:20 AM.

07-15-2007, 12:08 PM	#12
1tonblaze Registered User Join Date: Feb 2007 Location: Carroll County Maryland , Posts: 828	Re: Project: Bolt one on where did you get that front spring hanger from ???? looks like a off road design peice ???? __________________ 1970 k/5 blazer--> money pit - 14bolt dana 44 350 sm465/205 36 14.50 16 tires 1972 nova plane jane 6 clyinder might sell might keep dont know 2004 chevy s-10 crewcab zr5 sold 1985 c20 chevy long bed , beater , on its way to a better place in pa from what the dmv told me 2010 kia forte koup 2.4 sx -over the river and threw the woods to the total lot it went . 1999 k1500 suburban 350 vortec 4l60e leather land yacht .

07-16-2007, 06:28 AM	#15
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Project: Bolt one on Hey Jon, Was away for a few days, pm returned.

07-16-2007, 08:39 AM	#17
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Project: Bolt one on should be a beast... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-16-2007, 08:52 AM	#18
1tonblaze Registered User Join Date: Feb 2007 Location: Carroll County Maryland , Posts: 828	Re: Project: Bolt one on wish i would have seen that before i got all my stuff for my blazer __________________ 1970 k/5 blazer--> money pit - 14bolt dana 44 350 sm465/205 36 14.50 16 tires 1972 nova plane jane 6 clyinder might sell might keep dont know 2004 chevy s-10 crewcab zr5 sold 1985 c20 chevy long bed , beater , on its way to a better place in pa from what the dmv told me 2010 kia forte koup 2.4 sx -over the river and threw the woods to the total lot it went . 1999 k1500 suburban 350 vortec 4l60e leather land yacht .

07-17-2007, 06:11 PM	#19
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Project: Bolt one on Got the brackets in today... DHL really moves fast! These things are HEAVY: Last edited by FormerMember; 04-02-2009 at 03:01 PM.

07-18-2007, 09:28 AM	#20
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Project: Bolt one on Definitely look heavy duty. How soon until you start getting them installed? __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

07-18-2007, 09:49 AM	#22
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: Project: Bolt one on Hey DOOOOD! Hope all is well! So your building two rigs? __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks

07-18-2007, 11:51 AM	#24
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: Project: Bolt one on WOW! Mr. Project you are! hahaha Well good! Glad to hear the EastCoast is doing you good! Have Fun and best of luck with your 8million projects hahaaa Burt __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks

07-31-2007, 09:59 AM	#25
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Project: Bolt one on Frame looks incredible!!! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.