Do you need '64-'66 Chevy Truck Parts?

[LILRED66]

Originally Posted by 71'tahoe

Do you have any good doors,fenders,inner fenders,core support or fan shrouds for a 1-ton 65' with a striaght six engine??

I sent you a PM with information regarding these parts. Do you still need them? If so, let me know if I can help and please keep me in mind for your other 4-5-6 Chevy Truck parts in the future.

[Mitch6667]

Do you have a grille support, right and left inner fenders, radiator support and a right side fender? If so could you send me pics and prices? mitch.loring@goblc.com

Thanks,
Mitch

[LILRED66]

Originally Posted by Mitch6667

Do you have a grille support, right and left inner fenders, radiator support and a right side fender? If so could you send me pics and prices? mitch.loring@goblc.com

Thanks,
Mitch

Mitch:

Thanks for your interest in my 4-5-6 Chevy Truck parts. I have all of the parts you are seeking with the exception of a radiator support. I have taken photos and I will send them to you, via your e-mail listed above, along with description and pricing, including packaging and shipping.

Thanks again for your interest and let me know if I can help you with other 4-5-6 Chevy Truck parts in the future.

[nxtruck]

Tony,
would you have a wiper linkage assy. and a good 2-spd. wiper motor for a '66 Chevy? If so, how much shipped to 63703?
Thanks in advance!
Chris

[1966gmc]

How about a radiator for a v8 auto 66 to zip code 21613

[LILRED66]

Originally Posted by nxtruck

Tony,
would you have a wiper linkage assy. and a good 2-spd. wiper motor for a '66 Chevy? If so, how much shipped to 63703?
Thanks in advance!
Chris

Chris:

Thanks for your inquiry. I have a complete wiper assembly linkage and a good 2-speed wiper motor for a 4-5-6 Chevy Truck. I will send you a PM with pricing, including shipping, via UPS, Ground.

[LILRED66]

Originally Posted by 1966gmc

How about a radiator for a v8 auto 66 to zip code 21613

Thanks for your interest in my 4-5-6 Chevy Truck parts. I have a few good, used factory Harrison 4-core radiators, sized for a V8. I will send you a PM with a description and pricing, including packaging & shipping, via UPS, Ground.

[283 Man]

Tony,Thank You Again Matthews (my Son) very happy with Cab Salls will try get you pictures soon.Also wanted ask you how much are your (64-66) wheel tubs? what would you need in trade for two used ones? Thanks Morton.

[LILRED66]

Originally Posted by 283 Man

Tony,Thank You Again Matthews (my Son) very happy with Cab Salls will try get you pictures soon.Also wanted ask you how much are your (64-66) wheel tubs? what would you need in trade for two used ones? Thanks Morton.

Morton:

I am glad to hear you and Matthew like the 4-5-6 Chevy Truck Custom Cab sails. They were one of the best pairs I had in my inventory. I dress them up by cleaning them up real good and installing 1/8" black pinstipping in the horizontal valleys and painting the "Custom" script with a black automotive touch-up paint pen. That really makes them pop.

I received the C20 emblems late last week. I was not aware they were missing all four of the mounting studs and speed nuts. I guess I will have to stick them on my rig.

In any case, I have a few good, used pairs of fleetside rear wheel tubs for sale. They are $175.00, plus $60.00 packaging & shipping, via UPS, Ground. They are in very good condition with no rust-thru at the mounting lip and very few minor blemishes/dents. As far as a trade, I have a few fellows interested in these wheel tubs, as part of a complete swb fleetside bed package, so I would have to do a cash deal on them.

Thanks for the C20 emblems and let me know if I can help you with these or other 4-5-6 Chevy Truck parts in the future.

[Bob'sK10CHEVY]

I'm looking for a set of motor stands from frame to motor mount for a 1966 K10 4X4 V8 327. Can you help?

[283 Man]

Sorry Tony about the missing bolts or nutts on C-20 badges.That was one of the few things I saved from that truck the C-20 badges.

[LILRED66]

Originally Posted by Bob'sK10CHEVY

I'm looking for a set of motor stands from frame to motor mount for a 1966 K10 4X4 V8 327. Can you help?

Bob:

Welcome aboard from Kansas City, KS. You have a personal message regarding these parts...let me know if I can help.

[283 Man]

Tony, heads up there is a guy on www.classicparts.com the forum look on 1960-1966 forum that has a 66 3/4 ton Custom Camper truck with the RARE Badges on his truck out of Texas his name bobcat77,you might give him a shout dont have any idea if he would sale the emblems or not just got my eyes openknow you looking for them. THANKS Morton 283 man...

[RWilliams]

Hello,

I am looking for a few rather obscure parts for my '65 Chevy that I am restoring. I have several parts catalogs, but have been unable to locate these pieces.

Do you have, or know a source for the plastic rollers that fit on the window regulator that ride in the window channel? The ones I have are flattened out on one side.

Also, on the bottom of my glove compartment door, on the back side, there appears to have once been some type of flat spring. I have part of the original, but it is broken.

Finally ( for now ), on the rear Step Side bumper, there is a cover that fits over the bumper brace, between the bottom of the tailgate and the bumper. One of mine is missing.

Any assistance you could provide would be most helpful. Take your time on these as I am not in the assembly stage yet.

[LILRED66]

Originally Posted by RWilliams

Hello,

I am looking for a few rather obscure parts for my '65 Chevy that I am restoring. I have several parts catalogs, but have been unable to locate these pieces.

Do you have, or know a source for the plastic rollers that fit on the window regulator that ride in the window channel? The ones I have are flattened out on one side.

Also, on the bottom of my glove compartment door, on the back side, there appears to have once been some type of flat spring. I have part of the original, but it is broken.

Finally ( for now ), on the rear Step Side bumper, there is a cover that fits over the bumper brace, between the bottom of the tailgate and the bumper. One of mine is missing.

Any assistance you could provide would be most helpful. Take your time on these as I am not in the assembly stage yet.

RWilliams:

Good morning and thanks for your interest in my 4-5-6 Chevy Truck parts. I have all the obscure 4-5-6 Chevy Truck parts you are looking for will send you a PM regarding the same.

Thanks for your interest and let me know if I can help you with these or other 4-5-6 Chevy Truck parts in the future.

[LILRED66]

Originally Posted by 283 Man

Tony, heads up there is a guy on www.classicparts.com the forum look on 1960-1966 forum that has a 66 3/4 ton Custom Camper truck with the RARE Badges on his truck out of Texas his name bobcat77,you might give him a shout dont have any idea if he would sale the emblems or not just got my eyes openknow you looking for them. THANKS Morton 283 man...

Morton:

Thanks for the lead...I will follow-up on this one. Thanks for keeping an eye out for me.

[283 Man]

No problem anytime...

[shortbed70]

I am looking at getting the rear tail light sections for my 65 from top to bottom. The pieces of bodywork on both sides of the tailgate. Do you have any and what would you ship to 66535?

[LILRED66]

Originally Posted by shortbed70

I am looking at getting the rear tail light sections for my 65 from top to bottom. The pieces of bodywork on both sides of the tailgate. Do you have any and what would you ship to 66535?

Thanks for your interest in my 4-5-6 Chevy Truck parts. I have a few pairs of rear fleetside bed tail light panels for a '60-'66 Chevy truck. They will be removed just in front of the vertical seam, so they will need to be trimmed to fit. They are shells and do not include the tailgate chains, tail light assemblies or reverse light assemblies.

The pair is $150.00, plus $40.00 packaging & shipping, via UPS, Ground. Let me know your thoughts with these parts or other 4-5-6 Chevy Truck parts and I will proceed accordingly.

[truckn']

Tony do you happen to have a big tranny hump laying around? Wanting to put 4 speed in and will have to change out.

[LILRED66]

Originally Posted by truckn'

Tony do you happen to have a big tranny hump laying around? Wanting to put 4 speed in and will have to change out.

I have a high hump tranny cover. I will send you a PM with this information. Thanks for your interest in my 4-5-6 Chevy Truck parts and let me know if I can help you with this part or other 4-5-6 Chevy Truck parts in the future.

[botsdots]

Tony, I sent you a PM regarding cab mount perches.

Thanks,
Daniel

[LILRED66]

Originally Posted by botsdots

Tony, I sent you a PM regarding cab mount perches.

Thanks,
Daniel

Daniel:

You have a PM in response to your request for rear cab-to-frame mount perches. Thanks for your continued interest in my 4-5-6 Chevy Truck parts. Please let me know if I can help you with these parts or other 4-5-6 Chevy Truck parts in the future.

[shortbed70]

Would you be interested in selling just one side and is me picking them up ok? I'm not that far away. Thanks.

Originally Posted by LILRED66

Thanks for your interest in my 4-5-6 Chevy Truck parts. I have a few pairs of rear fleetside bed tail light panels for a '60-'66 Chevy truck. They will be removed just in front of the vertical seam, so they will need to be trimmed to fit. They are shells and do not include the tailgate chains, tail light assemblies or reverse light assemblies.

The pair is $150.00, plus $40.00 packaging & shipping, via UPS, Ground. Let me know your thoughts with these parts or other 4-5-6 Chevy Truck parts and I will proceed accordingly.

[Iron-Butt]

Well Tony, I almost destroyed the hood going home. I was 20 miles from my family's residence (Arkansas) when they called me and told me and dad to pull over as there was golf ball size hail and 10 tornados in the Fort Smith area. We stopped under a big over pass and let it blow over. Yea no DAMAGE.