67-72 Bolt in pedal assembly - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jephs422 · 10-22-2008, 11:06 PM

Quote:

Originally Posted by stunna

jeph how much for your residual valve and your proportioning valve, assuming we get the group buy thing going?

I know Justin will let me sell the prop valves for $40.00, but I'll need to check on the residual valves. I am pretty sure I can get away with $19.00 a piece.

stunna · 10-22-2008, 11:42 PM

that sounds good to me, thanks

stunna · 10-24-2008, 02:56 PM

what we looking like on the group buy numbers on this unit?

Riveted1 · 10-24-2008, 05:09 PM

Quote:

Originally Posted by jephs422

For disc/drum this one will work just fine.

Sorry for my ignorance, but would that mean if running disc/drums you would need a 2lb residual valve for the discs (front lines), and a 10lb residual valve and one of those snazzy little adjustable proportioning valves for the drums (rears)?

VA72C10 · 10-26-2008, 10:29 PM

Quote:

Originally Posted by Riveted1

Sorry for my ignorance, but would that mean if running disc/drums you would need a 2lb residual valve for the discs (front lines), and a 10lb residual valve and one of those snazzy little adjustable proportioning valves for the drums (rears)?

I will have the same setup so interested as well.

jephs422 · 10-27-2008, 11:54 AM

Quote:

Originally Posted by Riveted1

Sorry for my ignorance, but would that mean if running disc/drums you would need a 2lb residual valve for the discs (front lines), and a 10lb residual valve and one of those snazzy little adjustable proportioning valves for the drums (rears)?

Exactly. you will want to run a 2lb up front, and a 10lb for the rear; the adjustable prop valve will also go to the rear.

jephs422 · 10-27-2008, 11:56 AM

Quote:

Originally Posted by stunna

what we looking like on the group buy numbers on this unit?

Same as the original booster set up. I just don't have those ready yet. I will have them done this week though.

For anyone that is in the group buy, PM me and give me your information or call me at 805-200-6734. I am going to go ahead and keep the price on the table for another week, but I would like to take care of those who would like to buy now.

VA72C10 · 10-28-2008, 10:51 PM

TTT...i'm 99% in...just have to sell a few parts this weekend.

stunna · 10-29-2008, 10:25 AM

ordered mine should be here by weeks end!

jlaird · 10-29-2008, 10:50 AM

Quote:

Originally Posted by stunna

ordered mine should be here by weeks end!

Did they give you the $350 group buy price? I need to call them.

stunna · 10-29-2008, 11:03 AM

Quote:

Originally Posted by jlaird

Did they give you the $350 group buy price? I need to call them.

yes i did get the group buy price of $350.00

nuke1 · 10-29-2008, 07:33 PM

Well i bit the bullet and ordered one too. YAH complete smooth firewall!!!

jlaird · 10-29-2008, 09:24 PM

Quote:

Originally Posted by nuke1

Well i bit the bullet and ordered one too. YAH complete smooth firewall!!!

Nice! Did you guys get the valves too?

stunna · 10-29-2008, 10:59 PM

Quote:

Originally Posted by jlaird

Nice! Did you guys get the valves too?

i didn't get the valves yet, but will get soon. We can still get the group price later on that also.

nuke1 · 10-30-2008, 01:04 PM

i ordered the valves also, might as well, i now need to order my stainless brake line kit and ebrake cables from inline...

stunna · 10-30-2008, 04:24 PM

i have the stainless brake line kit already, now i wish i would have got the valves also, can't wait to put that thing on!

jkaylor68gmc · 10-30-2008, 04:54 PM

I thought that was a Scotts piece, they are in Oxnard.

We have done alot with them.

ca180 · 10-30-2008, 08:28 PM

I've got an '81... so this isn't really much use to me (besides I'm broke

)...

I have followed this thread since the beginning and I have to say, you are definitely one of the most patient and helpful sales persons I have ever seen!

+1 on the customer service! You guys seriously rock! If I hit the jackpot in the lotto I will hit you guys up.

stunna · 11-05-2008, 01:59 AM

well i got my parts today, and i have to say everything looks great. great workmanship. The service was outstanding!!

jlaird · 11-05-2008, 09:43 AM

ordered mine monday. Thanks Jeph!

jephs422 · 11-10-2008, 12:43 PM

Quote:

Originally Posted by jlaird

ordered mine monday. Thanks Jeph!

Rigo's 70 C10 · 11-10-2008, 04:51 PM

I am interested in one of these. When do you plan on having the 350.00 group buy again?

Thanks,
Rigo

stunna · 11-10-2008, 04:55 PM

Quote:

Originally Posted by Rigo's 70 C10

I am interested in one of these. When do you plan on having the 350.00 group buy again?

Thanks,
Rigo

i think you can get it now, still going on

jephs422 · 11-10-2008, 05:14 PM

Quote:

Originally Posted by Rigo's 70 C10

I am interested in one of these. When do you plan on having the 350.00 group buy again?

Thanks,
Rigo

If you want one, call me up 805-200-6734, I'll take care of you.

Scottshotrods · 11-19-2008, 06:51 PM

Thankyou for all of the orders and the positive comments on are new
67-72 pedal ass we have made another 25 kits and we have them in
stock ready to ship.We would like to here comments on any ideas on
parts you guys and gals would like to see.We will be posting are new
67-72 firewall here up iin a short while this will save you alot of time
smoothing up your stock firewall.
Thankyou,
Justin
Scotts Hotrods

10-22-2008, 11:42 PM	#102
stunna Registered User Join Date: Nov 2006 Location: high point nc Posts: 442	Re: 67-72 Bolt in pedal assembly that sounds good to me, thanks

10-24-2008, 02:56 PM	#103
stunna Registered User Join Date: Nov 2006 Location: high point nc Posts: 442	Re: 67-72 Bolt in pedal assembly what we looking like on the group buy numbers on this unit?

10-28-2008, 10:51 PM	#108
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 67-72 Bolt in pedal assembly TTT...i'm 99% in...just have to sell a few parts this weekend. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-29-2008, 10:25 AM	#109
stunna Registered User Join Date: Nov 2006 Location: high point nc Posts: 442	Re: 67-72 Bolt in pedal assembly ordered mine should be here by weeks end!

10-29-2008, 07:33 PM	#112
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: 67-72 Bolt in pedal assembly Well i bit the bullet and ordered one too. YAH complete smooth firewall!!! __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

10-30-2008, 01:04 PM	#115
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: 67-72 Bolt in pedal assembly i ordered the valves also, might as well, i now need to order my stainless brake line kit and ebrake cables from inline... __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

10-30-2008, 04:24 PM	#116
stunna Registered User Join Date: Nov 2006 Location: high point nc Posts: 442	Re: 67-72 Bolt in pedal assembly i have the stainless brake line kit already, now i wish i would have got the valves also, can't wait to put that thing on!

10-30-2008, 04:54 PM	#117
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: 67-72 Bolt in pedal assembly I thought that was a Scotts piece, they are in Oxnard. We have done alot with them. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

10-30-2008, 08:28 PM	#118
ca180 tryin to get laid Join Date: Aug 2008 Location: OK Posts: 198	Re: 67-72 Bolt in pedal assembly I've got an '81... so this isn't really much use to me (besides I'm broke )... I have followed this thread since the beginning and I have to say, you are definitely one of the most patient and helpful sales persons I have ever seen! +1 on the customer service! You guys seriously rock! If I hit the jackpot in the lotto I will hit you guys up.

11-05-2008, 01:59 AM	#119
stunna Registered User Join Date: Nov 2006 Location: high point nc Posts: 442	Re: 67-72 Bolt in pedal assembly well i got my parts today, and i have to say everything looks great. great workmanship. The service was outstanding!!

11-05-2008, 09:43 AM	#120
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: 67-72 Bolt in pedal assembly ordered mine monday. Thanks Jeph!

11-10-2008, 04:51 PM	#122
Rigo's 70 C10 Registered User Join Date: Dec 2007 Location: New Mexico Posts: 106	Re: 67-72 Bolt in pedal assembly I am interested in one of these. When do you plan on having the 350.00 group buy again? Thanks, Rigo

11-19-2008, 06:51 PM	#125
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: 67-72 Bolt in pedal assembly Thankyou for all of the orders and the positive comments on are new 67-72 pedal ass we have made another 25 kits and we have them in stock ready to ship.We would like to here comments on any ideas on parts you guys and gals would like to see.We will be posting are new 67-72 firewall here up iin a short while this will save you alot of time smoothing up your stock firewall. Thankyou, Justin Scotts Hotrods

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.