1971 GMC parts - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

6packed · 04-04-2009, 10:27 AM

Quote:

Originally Posted by "67"StepSide

Thanks for the pic I thought it was 2wd, sorry I should have told you..thanks again john

I also have 2 wheel drive, that was the only pic I had.
Thanks

**71blksuper4x4** · 04-04-2009, 11:21 AM

did you happen to get pics of the blue dash pad yet? Thanks Trevor

ERASER5 · 04-04-2009, 08:23 PM

Quote:

Originally Posted by ERASER5

Ok. How much for the drive shaft?

Bump

6packed · 04-04-2009, 10:20 PM

Quote:

Originally Posted by 71blksuper4x4

did you happen to get pics of the blue dash pad yet? Thanks Trevor

After looking closely at the blue dash, I has been recovered, It no good.
Sorry.

4x4Bowhunter · 04-07-2009, 06:36 PM

Anything on a dome-light harness by chance?

6packed · 04-07-2009, 06:52 PM

Quote:

Originally Posted by 4x4Bowhunter

Anything on a dome-light harness by chance?

I have it in hand, wiring & light frame, No lens. $15 includes shipping & paypal
PM me

Don Quixote · 04-07-2009, 10:48 PM

I'd be surprised that you have the grilles still. If you do have one left, let me know how much shipped to Rochester, NY. RobtCReynolds@yahoo.de

6packed · 04-07-2009, 11:07 PM

Quote:

Originally Posted by Don Quixote

I'd be surprised that you have the grilles still. If you do have one left, let me know how much shipped to Rochester, NY. RobtCReynolds@yahoo.de

I have 2 - 1 chrome little bend in it & 1 that has been painted
Both GMC $50.00 each Shipped to you UPS $50.47

woodymm3 · 04-16-2009, 11:19 AM

did you ever sell those doors? if not you got some pictures of them?

**michael bustamante** · 04-16-2009, 11:49 AM

any news on getting some 67 vent windows (chrome)? Also Im needing to get one grill loop for a 67-68 polished. Thank you.

6packed · 04-16-2009, 06:16 PM

Quote:

Originally Posted by woodymm3

did you ever sell those doors? if not you got some pictures of them?

I have 3 sets of doors some good some ok, But all need repairs.

woodymm3 · 04-16-2009, 06:22 PM

could i get some pics of the best ones you got. i live about an hour away.

6packed · 04-16-2009, 06:26 PM

Quote:

Originally Posted by michael bustamante

any news on getting some 67 vent windows (chrome)? Also Im needing to get one grill loop for a 67-68 polished. Thank you.

Nothing yet, Still prospecting.

6packed · 04-16-2009, 06:28 PM

Quote:

Originally Posted by woodymm3

could i get some pics of the best ones you got. i live about an hour away.

I'll get you some tomorrow & post.
Thanks

**michael bustamante** · 04-17-2009, 11:01 AM

Quote:

Originally Posted by 6packed

Nothing yet, Still prospecting.

Sounds good. Im digging around here too but no luck. If you find any or the polished grill hoop, pm me and let me know, id appreciate it

70rs/ss · 04-17-2009, 02:52 PM

I'd like a set of the 68 chevy or 68-72 GMC fenders, the best set with no rust, how about shipping to 86042 business addy? I think I really only need one, but two would be about the same as far as shipping so, a good pair would be nice??

71jimmy · 04-17-2009, 03:39 PM

6packed, I need the rear passenger side quarter panel for my 71 Jimmy including the tail light section. See pick. It can be cut down from the rail about 2 inches and 2 inches in front of the side marker light. Also need clean, rust and dent free, driver side front fender for same 71 Jimmy. Shipping would be to 95628. Let me know if you can help and how much.

Thanks

PS pic not of my Blazer

6packed · 04-17-2009, 10:44 PM

Quote:

Originally Posted by 71jimmy

6packed, I need the rear passenger side quarter panel for my 71 Jimmy including the tail light section. See pick. It can be cut down from the rail about 2 inches and 2 inches in front of the side marker light. Also need clean, rust and dent free, driver side front fender for same 71 Jimmy. Shipping would be to 95628. Let me know if you can help and how much.

Thanks

PS pic not of my Blazer

I just sold the only jimmy I had 2 days ago, I'll do some looking, I see them all the time, but people don't want to get rid of them.
Thanks

6packed · 04-17-2009, 10:45 PM

Quote:

Originally Posted by 70rs/ss

I'd like a set of the 68 chevy or 68-72 GMC fenders, the best set with no rust, how about shipping to 86042 business addy? I think I really only need one, but two would be about the same as far as shipping so, a good pair would be nice??

I'll check on it tomarrow for you.
Thanks

71jimmy · 04-18-2009, 01:23 AM

Quote:

Originally Posted by 6packed

I just sold the only jimmy I had 2 days ago, I'll do some looking, I see them all the time, but people don't want to get rid of them.
Thanks

Thanks for the reply. How about the rear pass. quarter panel tail light section? As in the pic above. Any chance you have a bed you can cut it off of? Can be Chevy or GMC bed, no difference there.

Thanks

6packed · 04-22-2009, 09:36 AM

Quote:

Originally Posted by 71jimmy

Thanks for the reply. How about the rear pass. quarter panel tail light section? As in the pic above. Any chance you have a bed you can cut it off of? Can be Chevy or GMC bed, no difference there.

Thanks

Sorry, Nothing at this time, All my beds are to good to cut up.
I'll be looking.
Thanks Craig

xxusteveuxx · 04-28-2009, 01:43 AM

wouldn't happen to have a tilt floor shift column would you? if so whats it need and how much shipped to 48382?

6packed · 04-28-2009, 01:40 PM

Quote:

Originally Posted by xxusteveuxx

wouldn't happen to have a tilt floor shift column would you? if so whats it need and how much shipped to 48382?

Sorry nothing at this time.
Thanks

oj70chevy · 04-28-2009, 02:28 PM

would you happen to have a 1 brl air cleaner set up for my 70 c/10 250 6cyl.

**bigdon-70blazer** · 04-28-2009, 10:58 PM

Quote:

Originally Posted by bigdon-70blazer

I need a really good set of near perfect reverse lite lenses for the 67-70 chevy truck, the one that has the circle...

Any news?

04-04-2009, 11:21 AM	#102
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: 1971 GMC parts did you happen to get pics of the blue dash pad yet? Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-07-2009, 06:36 PM	#105
4x4Bowhunter Registered User Join Date: Jan 2005 Location: Denver, CO Posts: 110	Re: 1971 GMC parts Anything on a dome-light harness by chance?

04-07-2009, 10:48 PM	#107
Don Quixote Registered User Join Date: May 2008 Location: Woodlawn, TN Posts: 275	Re: 1971 GMC parts I'd be surprised that you have the grilles still. If you do have one left, let me know how much shipped to Rochester, NY. RobtCReynolds@yahoo.de

04-16-2009, 11:19 AM	#109
woodymm3 Registered User Join Date: Mar 2008 Location: Oklahoma city Posts: 490	Re: 1971 GMC parts did you ever sell those doors? if not you got some pictures of them?

04-16-2009, 11:49 AM	#110
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: 1971 GMC parts any news on getting some 67 vent windows (chrome)? Also Im needing to get one grill loop for a 67-68 polished. Thank you. __________________ 1967custom

04-16-2009, 06:22 PM	#112
woodymm3 Registered User Join Date: Mar 2008 Location: Oklahoma city Posts: 490	Re: 1971 GMC parts could i get some pics of the best ones you got. i live about an hour away.

04-17-2009, 02:52 PM	#116
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: 1971 GMC parts I'd like a set of the 68 chevy or 68-72 GMC fenders, the best set with no rust, how about shipping to 86042 business addy? I think I really only need one, but two would be about the same as far as shipping so, a good pair would be nice??

04-17-2009, 03:39 PM	#117
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	Re: 1971 GMC parts 6packed, I need the rear passenger side quarter panel for my 71 Jimmy including the tail light section. See pick. It can be cut down from the rail about 2 inches and 2 inches in front of the side marker light. Also need clean, rust and dent free, driver side front fender for same 71 Jimmy. Shipping would be to 95628. Let me know if you can help and how much. Thanks PS pic not of my Blazer Attached Images __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

04-28-2009, 01:43 AM	#122
xxusteveuxx Registered User Join Date: Jun 2007 Location: michigan Posts: 3	Re: 1971 GMC parts wouldn't happen to have a tilt floor shift column would you? if so whats it need and how much shipped to 48382?

04-28-2009, 02:28 PM	#124
oj70chevy 250 V-6 Club Join Date: Feb 2005 Location: San antonio, TX. Posts: 898	Re: 1971 GMC parts would you happen to have a 1 brl air cleaner set up for my 70 c/10 250 6cyl. __________________ 1970 Chevy C/10 6 Cyl. 43k original miles all factory .http://67-72chevytrucks.com/vboard/s...d.php?t=197523 Never ask a stupid question unless you want a stupid answer .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.