Parting a 71 blazer 4x4 now - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 04-12-2009, 07:25 PM

Critter, its has some rust on pass side, $25 for it. I can get pics if your still interested
reefer55, I still have it, its has a spot where rust hs gone through it. PIcs of it on page 5, leaning against white truck and the next pic is the rust spot. $20 plus shipping. I think USPS would ship it but not sure
Thanks Randy

Critter · 04-12-2009, 08:22 PM

Quote:

Originally Posted by teeitup

Critter, its has some rust on pass side, $25 for it. I can get pics if your still interested

Thanks Randy

Nah, don't worry about it, I have a decent one that is probably in about the same shape. I thought I might get lucky and find a spotless one.

If you still have it when I make the trip in a couple weeks I might take a look at it just for the heck of it. Thanks.

teeitup · 04-13-2009, 09:55 PM

About got it all parted, here is what is left and for sale
motor and tranny are sold
rear end is sold

teeitup · 04-13-2009, 09:56 PM

fffffffffffffff

teeitup · 04-13-2009, 09:57 PM

dddddddddddd

teeitup · 04-13-2009, 10:00 PM

sssssssssssss

4X4GMC1972 · 04-09-2009, 11:21 PM

No prob

teeitup · 04-11-2009, 11:09 AM

Still have quite a few parts for sale off this blazer!!!!! Thanks Randy

Critter · 04-11-2009, 01:06 PM

What shape is that radiator support in? Is it already spoken for?

reefer55 · 04-11-2009, 01:58 PM

Interested in the hatch seal that is attached to the tail gate. When the hatch is closed the hatch door seal sit against it. Do you have it still if so how much to get it to alberta canada.T5W2A5

amcnut69 · 04-14-2009, 01:15 AM

Tailgate trim trim and molding to 95966?

justtime520 · 04-14-2009, 01:58 AM

Hey still got the brake booster and linkage and brackets is so how much to 85735

drivethechevy · 04-14-2009, 01:59 AM

is the engine cross member still available? if it is how much for it shiped to 56326, do u take snail mail payments?
thanks nate

teeitup · 04-14-2009, 08:11 AM

amcnut69, I'll get a pic of the tailgate trim, the lower bottom piece was real bad, 2 uppers were good
justtime520, I'll find a box and get you a quote tonight
drivethechevy, Nate, $70 shipped for motor crossmember
Thanks Randy

stealthy '69 · 04-14-2009, 08:19 AM

Are the wheels 15X8 or 15X10?

justtime520 · 04-14-2009, 10:25 AM

ah yek while your there do you have the dash wiring if its still in decent condition, mines toast

berencam · 04-14-2009, 10:28 PM

Also on that booster if he doesnt want it i could use a part off the booster. I need the front seal that goes on the rod that leads to the master cyl.

justtime520 · 04-15-2009, 12:19 AM

thanks let me know

teeitup · 04-15-2009, 08:32 AM

berencam, If justtime520 doesn't want it I have it sold locally
Justtime520, I'll for sure get a quote tonight
Thanks Randy

berencam · 04-15-2009, 06:28 PM

Quote:

Originally Posted by teeitup

berencam, If justtime520 doesn't want it I have it sold locally
Justtime520, I'll for sure get a quote tonight
Thanks Randy

Your always parting these trucks when you run across another one will ya pm me and sell it to me?

teeitup · 04-15-2009, 11:08 PM

Berencam, sure will
Justtime520, I pm'd you total
amcnut69, here are the pieces I have, one has a ding in it. $12 plus shipping for pair, no clips
Thanks Randy

HuggerCST · 06-01-2009, 11:05 AM

Randy, I have a local friend that needs the leaf spring U-bolt plates for the rearend. If you still have a set, send me a pic and a price. Thanks

Walts_restoration · 04-21-2009, 12:17 AM

how much for the frame hangers? im not sure if they would bolt right on a 2wd shortbed/longbed truck or not. i know springs may be different.

What transfer case did it have (i know it sold)? i assume a th350? did the motor run at all?

How much did you want for the wheels/tires? where the tires useable or just for looks.

Walts_restoration · 04-21-2009, 05:06 PM

i think im gonna pass on the frame hangers, debating it, would be nice if i had a truck i wanted to convert to 4x4, but as of right now i dont have any 67-72s im toying with.

what did you want for the trans and adapter? I saw that the t case was sold, didnt know about the rest.

teeitup · 04-21-2009, 07:39 PM

Ryan, adapter and tranny have been sold, sorry. Thanks Randy

04-12-2009, 07:25 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now Critter, its has some rust on pass side, $25 for it. I can get pics if your still interested reefer55, I still have it, its has a spot where rust hs gone through it. PIcs of it on page 5, leaning against white truck and the next pic is the rust spot. $20 plus shipping. I think USPS would ship it but not sure Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-13-2009, 09:55 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now About got it all parted, here is what is left and for sale motor and tranny are sold rear end is sold Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-13-2009, 09:56 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now fffffffffffffff Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-13-2009, 09:57 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now dddddddddddd Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-13-2009 at 09:58 PM.

04-13-2009, 10:00 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now sssssssssssss Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2009, 11:21 PM	#7
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Re: Parting a 71 blazer 4x4 now No prob __________________ 1978 Dodge Omni

04-11-2009, 11:09 AM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now Still have quite a few parts for sale off this blazer!!!!! Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-11-2009, 01:06 PM	#9
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: Parting a 71 blazer 4x4 now What shape is that radiator support in? Is it already spoken for? __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

04-11-2009, 01:58 PM	#10
reefer55 Registered User Join Date: Oct 2008 Location: Edmonton, alberta, canada Posts: 189	Re: Parting a 71 blazer 4x4 now Interested in the hatch seal that is attached to the tail gate. When the hatch is closed the hatch door seal sit against it. Do you have it still if so how much to get it to alberta canada.T5W2A5

04-14-2009, 01:15 AM	#11
amcnut69 Registered User Join Date: Nov 2008 Location: Oroville,Ca Posts: 11	Re: Parting a 71 blazer 4x4 now Tailgate trim trim and molding to 95966?

04-14-2009, 01:58 AM	#12
justtime520 Registered User Join Date: Mar 2009 Location: Tucson AZ Posts: 187	Re: Parting a 71 blazer 4x4 now Hey still got the brake booster and linkage and brackets is so how much to 85735

04-14-2009, 01:59 AM	#13
drivethechevy Registered User Join Date: May 2007 Location: Buffalo MN Posts: 606	Re: Parting a 71 blazer 4x4 now is the engine cross member still available? if it is how much for it shiped to 56326, do u take snail mail payments? thanks nate __________________ Trial and Error, its expensive but its a mistake i most likely wont make again 1971 chevy k10 custom deluxe http://67-72chevytrucks.com/vboard/s...d.php?t=341257 1968 chevy k/10 fleet http://67-72chevytrucks.com/vboard/s...d.php?t=334731 1948 desoto custom coupe fluid drive(family heirloom)

04-14-2009, 08:11 AM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now amcnut69, I'll get a pic of the tailgate trim, the lower bottom piece was real bad, 2 uppers were good justtime520, I'll find a box and get you a quote tonight drivethechevy, Nate, $70 shipped for motor crossmember Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-14-2009, 08:19 AM	#15
stealthy '69 '69 Chevy SWB Join Date: Feb 2009 Location: Surprise, Az Posts: 1,065	Re: Parting a 71 blazer 4x4 now Are the wheels 15X8 or 15X10?

04-14-2009, 10:25 AM	#16
justtime520 Registered User Join Date: Mar 2009 Location: Tucson AZ Posts: 187	Re: Parting a 71 blazer 4x4 now ah yek while your there do you have the dash wiring if its still in decent condition, mines toast



Register or Log In To remove these advertisements.

04-14-2009, 10:28 PM	#17
berencam Registered User Join Date: Aug 2007 Location: branson mo Posts: 933	Re: Parting a 71 blazer 4x4 now Also on that booster if he doesnt want it i could use a part off the booster. I need the front seal that goes on the rod that leads to the master cyl. __________________ 69 chevy c10 350 3 speed manual wood bed build thread here r.i.p. 70 c10 auto 350 build here

04-15-2009, 12:19 AM	#18
justtime520 Registered User Join Date: Mar 2009 Location: Tucson AZ Posts: 187	Re: Parting a 71 blazer 4x4 now thanks let me know

04-15-2009, 08:32 AM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now berencam, If justtime520 doesn't want it I have it sold locally Justtime520, I'll for sure get a quote tonight Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-15-2009, 11:08 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now Berencam, sure will Justtime520, I pm'd you total amcnut69, here are the pieces I have, one has a ding in it. $12 plus shipping for pair, no clips Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-01-2009, 11:05 AM	#22
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Parting a 71 blazer 4x4 now Randy, I have a local friend that needs the leaf spring U-bolt plates for the rearend. If you still have a set, send me a pic and a price. Thanks __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

04-21-2009, 12:17 AM	#23
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: Parting a 71 blazer 4x4 now how much for the frame hangers? im not sure if they would bolt right on a 2wd shortbed/longbed truck or not. i know springs may be different. What transfer case did it have (i know it sold)? i assume a th350? did the motor run at all? How much did you want for the wheels/tires? where the tires useable or just for looks. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums Last edited by Walts_restoration; 04-21-2009 at 12:20 AM.

04-21-2009, 05:06 PM	#24
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: Parting a 71 blazer 4x4 now i think im gonna pass on the frame hangers, debating it, would be nice if i had a truck i wanted to convert to 4x4, but as of right now i dont have any 67-72s im toying with. what did you want for the trans and adapter? I saw that the t case was sold, didnt know about the rest. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

04-21-2009, 07:39 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 71 blazer 4x4 now Ryan, adapter and tranny have been sold, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.