CA Parting Out 86 Scottsdale 4x4 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

minime's 68' · 12-26-2009, 06:54 PM

Are you selling the T-case shifter and the box to go with it?? And How much if you are.

KrazyRay · 12-26-2009, 10:00 PM

Quote:

Originally Posted by minime's 68'

Are you selling the T-case shifter and the box to go with it?? And How much if you are.

Yes, $35 shipped for the shifter and the box. Thanks, Ray

opadilla · 12-28-2009, 04:21 PM

How much for the chrome trim that goes around the grill/headlights shipped to 76086

KrazyRay · 12-29-2009, 12:26 AM

Quote:

Originally Posted by opadilla

How much for the chrome trim that goes around the grill/headlights shipped to 76086

The trim went with the front clip which was sold local. Thanks, Ray

thirdstreettito · 01-04-2010, 04:03 PM

Whats all the info on the rear end?

KrazyRay · 01-04-2010, 09:20 PM

Quote:

Originally Posted by thirdstreettito

Whats all the info on the rear end?

I sold the rear end local. This truck is pretty much done. There is only a few odds and ends left. It has a nice bare cab for $100. I have a 4x4 rear end out of a 86 swb 6 lug and a 4x4 rear end out of a 84 lwb 8 lug but I don't want to ship these big parts. Thanks, Ray

bikes&bowties · 01-05-2010, 12:55 AM

Would you have rear upper shock mounts. I believe all 73-87's are the same but mine are about 5 inches long and bolt through the frame. I could take a picture if it would help. I need both of them. Mine decided they would rather break than unbolt

KrazyRay · 01-06-2010, 12:10 AM

Quote:

Originally Posted by bikes&bowties

Would you have rear upper shock mounts. I believe all 73-87's are the same but mine are about 5 inches long and bolt through the frame. I could take a picture if it would help. I need both of them. Mine decided they would rather break than unbolt

Yes, I have the shock mounts on a 86 4x4. $16 shipped for the pair. Thanks, Ray

bikes&bowties · 01-06-2010, 09:48 PM

Quote:

Originally Posted by KrazyRay

Yes, I have the shock mounts on a 86 4x4. $16 shipped for the pair. Thanks, Ray

I sent you a PM.

drunkbus · 01-07-2010, 05:42 PM

Have any 56" rear springs? Shipped to 97423.

KrazyRay · 01-08-2010, 12:00 AM

Quote:

Originally Posted by drunkbus

Have any 56" rear springs? Shipped to 97423.

The springs I have measure 51 inches.

wtrskiadic · 01-12-2010, 12:17 AM

how much for a windshield

RussAwana · 01-21-2010, 10:02 PM

Hi Ray,

I'm rebuilding an 86' Scottsdale Stepside that came originally with a bench seat. I would like to put in a split type bench seat that has the center console/seat. Have anything that would "bolt-in"? I don't really want to mess around with having to modify brackets etc but I guess if it comes to it, I might have too. Thanks for your help! Russ

KrazyRay · 01-22-2010, 12:20 AM

Quote:

Originally Posted by RussAwana

Hi Ray,

I'm rebuilding an 86' Scottsdale Stepside that came originally with a bench seat. I would like to put in a split type bench seat that has the center console/seat. Have anything that would "bolt-in"? I don't really want to mess around with having to modify brackets etc but I guess if it comes to it, I might have too. Thanks for your help! Russ

Sorry, I don't have any split bench stuff. Thanks, Ray

tucsonjwt · 04-03-2011, 02:32 PM

I need a shifter knob for my 83 C20 granny 4 speed SM465. Do you have a knob like this? If so, what condition is it in? Thanks

liftlawssuck · 04-03-2011, 05:43 PM

You wouldn't happen to have a heater box assembly for a non A/C cab for 73-80 by chance?

bikes&bowties · 04-03-2011, 10:56 PM

How much for an 80's chevy 4x4 steering box shipped to 98848
Posted via Mobile Device

KrazyRay · 04-03-2011, 11:44 PM

tucsonjwt- Sorry, I don't think I have any right now.

liftlawssuck- I have one from a 76. $50 shipped to MA

bikes&bowties- I have one from an 84. (I will be parting this truck this week)
$62 shipped in a large flat rate box.

Thanks,
Ray

bikes&bowties · 04-04-2011, 01:26 AM

That's exactly what I need if it doesnt have any play in it. Pm me with payment instructions. Thanks!
Posted via Mobile Device

liftlawssuck · 04-04-2011, 06:24 PM

Thanks for the quick response.
Actually I'm looking for the inside duct assembly. Not the defrost duct but the lower part. I'm looking for a really clean in good shape with all the tabs still on it.
Thanks

CORSAIR · 04-04-2011, 07:14 PM

I am looking for a 83 dash pad and door panels (manual windows) in black?
let me know. Were is Orangevale, Ca?

Thanks,
CORSAIR

KrazyRay · 04-04-2011, 09:15 PM

liftlawssuck- The inside heater box is $56 shipped. It looked good, but I will pull to verify.

CORSAIR- No dash pad, but I have 84 black door panels on a truck that I'm parting beginning today. $25 plus shipping for the pair. Alittle bit of chapping at the top.

Thanks,
Ray

CORSAIR · 04-04-2011, 10:17 PM

I will take the black panels if they are manual? send me PM with your Paypal
info and I will get it handled

Thanks,
Fred

dragginutz · 04-05-2011, 07:56 AM

Looking for the chevy chrome cab corner pieces where chrome go's across back of cab?

KrazyRay · 04-05-2011, 09:58 AM

I have a few of them stowed away. I will check this weekend.
Thanks,
Ray

12-26-2009, 06:54 PM	#101
minime's 68' Registered User Join Date: May 2007 Location: Utah Posts: 53	Re: Parting Out 86 Scottsdale 4x4 Are you selling the T-case shifter and the box to go with it?? And How much if you are.

12-28-2009, 04:21 PM	#103
opadilla Registered User Join Date: Dec 2009 Location: weatherford tx Posts: 1	Re: Parting Out 86 Scottsdale 4x4 How much for the chrome trim that goes around the grill/headlights shipped to 76086

01-04-2010, 04:03 PM	#105
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Parting Out 86 Scottsdale 4x4 Whats all the info on the rear end? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

01-05-2010, 12:55 AM	#107
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: Parting Out 86 Scottsdale 4x4 Would you have rear upper shock mounts. I believe all 73-87's are the same but mine are about 5 inches long and bolt through the frame. I could take a picture if it would help. I need both of them. Mine decided they would rather break than unbolt

01-07-2010, 05:42 PM	#110
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: Parting Out 86 Scottsdale 4x4 Have any 56" rear springs? Shipped to 97423.

01-12-2010, 12:17 AM	#112
wtrskiadic Registered User Join Date: Dec 2009 Location: Huron South Dakota Posts: 26	Re: Parting Out 86 Scottsdale 4x4 how much for a windshield

01-21-2010, 10:02 PM	#113
RussAwana Registered User Join Date: Dec 2009 Location: Kailua, Hawaii Posts: 8	Re: Parting Out 86 Scottsdale 4x4 Hi Ray, I'm rebuilding an 86' Scottsdale Stepside that came originally with a bench seat. I would like to put in a split type bench seat that has the center console/seat. Have anything that would "bolt-in"? I don't really want to mess around with having to modify brackets etc but I guess if it comes to it, I might have too. Thanks for your help! Russ

04-03-2011, 02:32 PM	#115
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,189	Re: Parting Out 86 Scottsdale 4x4 I need a shifter knob for my 83 C20 granny 4 speed SM465. Do you have a knob like this? If so, what condition is it in? Thanks Attached Images

04-03-2011, 05:43 PM	#116
liftlawssuck Registered User Join Date: Mar 2011 Location: MA Posts: 353	Re: Parting Out 86 Scottsdale 4x4 You wouldn't happen to have a heater box assembly for a non A/C cab for 73-80 by chance?

04-03-2011, 10:56 PM	#117
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: Parting Out 86 Scottsdale 4x4 How much for an 80's chevy 4x4 steering box shipped to 98848 Posted via Mobile Device

04-03-2011, 11:44 PM	#118
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 86 Scottsdale 4x4 tucsonjwt- Sorry, I don't think I have any right now. liftlawssuck- I have one from a 76. $50 shipped to MA bikes&bowties- I have one from an 84. (I will be parting this truck this week) $62 shipped in a large flat rate box. Thanks, Ray Attached Images

04-04-2011, 01:26 AM	#119
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: Parting Out 86 Scottsdale 4x4 That's exactly what I need if it doesnt have any play in it. Pm me with payment instructions. Thanks! Posted via Mobile Device

04-04-2011, 06:24 PM	#120
liftlawssuck Registered User Join Date: Mar 2011 Location: MA Posts: 353	Re: Parting Out 86 Scottsdale 4x4 Thanks for the quick response. Actually I'm looking for the inside duct assembly. Not the defrost duct but the lower part. I'm looking for a really clean in good shape with all the tabs still on it. Thanks

04-04-2011, 07:14 PM	#121
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Parting Out 86 Scottsdale 4x4 I am looking for a 83 dash pad and door panels (manual windows) in black? let me know. Were is Orangevale, Ca? Thanks, CORSAIR __________________ "The Can't Family Lives Across The Street"

04-04-2011, 09:15 PM	#122
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 86 Scottsdale 4x4 liftlawssuck- The inside heater box is $56 shipped. It looked good, but I will pull to verify. CORSAIR- No dash pad, but I have 84 black door panels on a truck that I'm parting beginning today. $25 plus shipping for the pair. Alittle bit of chapping at the top. Thanks, Ray



Register or Log In To remove these advertisements.

04-04-2011, 10:17 PM	#123
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: Parting Out 86 Scottsdale 4x4 I will take the black panels if they are manual? send me PM with your Paypal info and I will get it handled Thanks, Fred __________________ "The Can't Family Lives Across The Street"

04-05-2011, 07:56 AM	#124
dragginutz Registered User Join Date: Apr 2011 Location: Calhoun Ga Posts: 6	Re: Parting Out 86 Scottsdale 4x4 Looking for the chevy chrome cab corner pieces where chrome go's across back of cab?

04-05-2011, 09:58 AM	#125
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting Out 86 Scottsdale 4x4 I have a few of them stowed away. I will check this weekend. Thanks, Ray

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.