572 update

[handsomerob]

Originally Posted by highperf4x4

Let me know when you save those to your hard drive or if they're not what you need so I can remove them from the post.

Done and Done, thank you sir, I hope they will match what I see.

[highperf4x4]

You're welcome!

[handsomerob]

Well got into the wiring today, things are going well.






Gonna spend the weekend hammering through all the wiring, one step closer every day.

[VA72C10]

Keep at it! You're making great progress!!!

[highperf4x4]

What size paper did you print those schematics on?

[handsomerob]

standard 9 1/2 x 11 portrait style, on a colour laser.

made it a little clearer to read with the laser.

[highperf4x4]

When I get ready to do mine I might have you mail me a copy!

[handsomerob]

lol, might be cool to get a print shop to print them on legal and in colour, or such, could even split them onto 4 pages too.

[handsomerob]

Well worked on wiring today, made a mount for the tranny controller.

[highperf4x4]

You're packing an awful lot of goodies into this truck!

[srea76]

whats the black can in front of the windshield washer bottle?

[highperf4x4]

Originally Posted by srea76

whats the black can in front of the windshield washer bottle?

That's the power steering fluid reservoir for the big block trucks.

[btullis99]

i'd like a little info on the upper radiator hose. i've got the serp setup on my small block but haven't had any luck finding an upper hose that fits in front or behind the alternator. i've got a flex hose on it and i hate it. part number, or application would be great.

[btullis99]

Originally Posted by highperf4x4

When I get ready to do mine I might have you mail me a copy!

i've got 2 jpg files that are really high quality of those wiring diagrams. you can zoom way in on them and read everything clear as a bell. i'll email em to you if you want them. just pm me your info if you want.

[highperf4x4]

Originally Posted by btullis99

i've got 2 jpg files that are really high quality of those wiring diagrams. you can zoom way in on them and read everything clear as a bell. i'll email em to you if you want them. just pm me your info if you want.

Thanks for the offer brother but I have them already. I sent those files for him to print out. I was just kidding him about printing some out for me too.

[handsomerob]

Originally Posted by btullis99

i'd like a little info on the upper radiator hose. i've got the serp setup on my small block but haven't had any luck finding an upper hose that fits in front or behind the alternator. i've got a flex hose on it and i hate it. part number, or application would be great.

That Rad hose doesn't actually fit right, it's the stock hose form a 402 BB and it comes in contact with the alternator. I am also looking for a good option to overcome this issue.

[Painter D]

Originally Posted by handsomerob

That Rad hose doesn't actually fit right, it's the stock hose form a 402 BB and it comes in contact with the alternator. I am also looking for a good option to overcome this issue.

I'm in the same boat. I'm doing a 502 swap with the same belt setup and the upper radiator hose does the same thing. I'll let you know if I figure anything out on it, I'll also keep an eye on this thread to see if you figure something out before me.

[KFreddy]

Originally Posted by handsomerob

That Rad hose doesn't actually fit right, it's the stock hose form a 402 BB and it comes in contact with the alternator. I am also looking for a good option to overcome this issue.

Gates makes a few hoses that fit, the one that I am using on a ZZ454 goes in front of the alternator, it requires a straight up water neck it works just fine for now untill I find something better. I'll try to find the part # for you guys.

Here are some crummy pics of the upper hose installed.

[Twisted78SS]

Take a look here, I have been adding diagrams that many other folks provide. Just trying to get them in one place to make things easier..
http://www.2heeldrive.com/Chevrolet/

And a higher resolution of the dash

http://www.2heeldrive.com/Chevrolet/...75fe1_o(2).jpg

Hope it helps!

[btullis99]

Originally Posted by KFreddy

Gates makes a few hoses that fit, the one that I am using on a ZZ454 goes in front of the alternator, it requires a straight up water neck it works just fine for now untill I find something better. I'll try to find the part # for you guys.

Here are some crummy pics of the upper hose installed.

that looks like a winner to me. it doesn't matter to me if i go in front of or behind the alt. any info on it would be great.

[handsomerob]

Originally Posted by btullis99

that looks like a winner to me. it doesn't matter to me if i go in front of or behind the alt. any info on it would be great.

Any luck on that part number? I would be very interested in that hose.

[handsomerob]

here are a few more pics

[Painter D]

Originally Posted by handsomerob

Any luck on that part number? I would be very interested in that hose.

I'm interested too.

[highperf4x4]

Are you getting new gauges?

[Hottrucks]

I'm doing a 500 caddy swap and my motor came with tat hose and a straight up neck tha motor is out od a 71 deville if someone want to check that hose..

might be a napa 7736 can hardly read it
other #'s
04680
BB 0HH800CH60 MADE IN USA Y PB