Let's See Your Garage / Workshop !!!

[WadmalawJoe]

Looks cool Boyd!

What is that thing on the corner of your workbench? Looks like a Dewalt cup warmer or cooler? Or did you just set your cup on your battery charger?

[Boyd]

It must be the angle, the cup is actually on the bench, right next to the charger.

Thanks for the compliments!

[CMACDONALD1]

Love your garage Boyd! Looks fantastic and well thought out.

[oilmanpat]

His a picture of one corner and a couple of one wall.

[GCncsuHD]

I see your name is fitting^ Nice collection!

I put this "Speaker Grille" together over the weekend. Don't worry, no grilles were harmed in the making of this speaker.


Untitled by wrfalcon75, on Flickr

[slowcpe]

Originally Posted by GCncsuHD

I see your name is fitting^ Nice collection!

I put this "Speaker Grille" together over the weekend. Don't worry, no grilles were harmed in the making of this speaker.

That's a pretty cool idea. I like that a lot.

[Smallz72project]

The best pictures I have right now of my shop. Its a 40x30. The front part of the shop you see in the pictures is 30x30 and is insulated on a concrete floor and a propane thirsty overhead heater. The back 10x30 is unfinished with dirt floor but being used for storage right now. Its not organized storage as I have no shelves or anything at this time, but once my buddy moves back and gets all his stuff out I want to install shelves and a rack system so I can start organizing parts. Also want to install a loft to utilize the space up top. Its nice to have the shop but I would love it to be bigger. Eventually I want to add on to this or build a completely separate building that's 60x60. Future plans regardless is better organization, a lift, and more lights. For comparison the truck in the first picture is a 99 GMC with 9"s of lift on 35s.

[KShortell]

A couple of years ago, I built my own and did 85% of the work by myself. It made the project possible (read: affordable). I posted an online album of it here:
https://www.facebook.com/KevinShorte...4002807&type=3

I LOVE IT!


My Garage Mahal and new deck







(There's a workbench here now, too.)






I even had to put one of these genuine 1960s surplus Fallout Shelter signs up.

[glider_6969]

this is what I have for now,

[baclay9]

New shop that I got. 40x40x14. Still have quite a bit to do but thought I would go ahead and post some pics up.

[clemdaddy]

working on adding a new, made to look old, shop at our place. see post #40 on page 2. its 24' x 30' with a outside lift. hope to have finished in the next month or so. but we'll see what happens.

[_Ogre]

nice addition clemdaddy, i like the drive thru shop
you guys with outside lifts kill me
outside lifts in michigan would be snow bound 4 mths per year, snow bound 6 mths this winter.

[RockTonka]

We've been here roughly a year and a half, slowly making it ours. Got a 45x60 that's insulated, 12K lift, 14' door on one side, 12' on the other, half bath, 2-story 17x30 built out inside...lower game room, upper bedroom w/full bath, central heat/air for rooms. 30x60 non-insulated, 3 doors - one is dock height...mainly used for storage.

We're gonna be here for a while...

[clemdaddy]

Originally Posted by RockTonka

We've been here roughly a year and a half, slowly making it ours. Got a 45x60 that's insulated, 12K lift, 14' door on one side, 12' on the other, half bath, 2-story 17x30 built out inside...lower game room, upper bedroom w/full bath, central heat/air for rooms. 30x60 non-insulated, 3 doors - one is dock height...mainly used for storage.

We're gonna be here for a while...

too cool guys... that shop is all you need, i'd be there for a long while. its about time for a shop warming party?
... rack'em up.

[NONHOG]

clemdaddy, how cool!

[Wasted Income]

40x56x14. Still working on finishing out the inside.

[Revelation]

The '65 would never fit in my single car but it's a good place to store my motorcycles and work on other peoples bikes as well as my own.

Just a good place to get away to after work where i can clear my head







everything on this wall belonged to my dad I pulled it all from his garage closet. The 1st aid kit was about 40 years old and had never been used. Oil still in the cans he told me to throw it all away just could not bring my self to do it.

[MP&C]

Here's mine from a couple years ago when I did a metalshaping demo for the local Stovebolters. We made a windshield panel for the top of the TF cab..

[motornut]

summer 1990....simple two car garage,80 firebird must have be inside,the hoods out back.
can't find any inside pic,gotta love a camp fire....burning the old deck/porch

[motornut]

then here for about 10 years...

[esoxman308]

Since I was a kid I always wanted an old barn for a workshop, took me awhile, but I finally made it happen....

[motornut]

here for 4-5years it was great never any complaints

[motornut]

then here...just a two car garage,extra parking pad out back tho,and a laneway on the far side of the house gave access to the back

[motornut]

now here,but moving

[motornut]

to here,just finished the basement work bench