Billet Aluminum Radio Plate - Gauging Interest for another production run - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Smoothride · 03-20-2013, 02:25 PM

put me on the list...Let me know when to send full payment for a polish one. Thanks

magntik · 03-20-2013, 05:38 PM

Quote:

Originally Posted by mahanian

Just so everyone is aware this is what the unpolished looks like (tooling marks). In my opinion it's worth the extra $20 even if you plan to paint it because I've sanded and polished several of these myself before I started paying someone and it's a PAIN! But it's completely your call, I just want everyone to be aware.

I bought a couple extra, I will offer them up in the order that I get requests

OK, you talked me into it, can you change mine to a polished version?

mahanian · 03-20-2013, 06:03 PM

Quote:

Originally Posted by Smoothride

put me on the list...Let me know when to send full payment for a polish one. Thanks

I have one for you, I should have them back from the polisher by Monday

Quote:

Originally Posted by magntik

OK, you talked me into it, can you change mine to a polished version?

Consider it done!

**68 Four on the Floor** · 03-20-2013, 06:32 PM

Ill take one if you have any left

zzz_still · 03-21-2013, 04:29 AM

Ah, ok. I think I'd like to change to polished as well

Mandojag · 03-24-2013, 12:15 AM

I'll take a polished one if you still have some.
Posted via Mobile Device

Sklptrljay · 03-24-2013, 12:42 AM

Can you change mine to polished please? I didn't realize there would be so much tooling marks.

mahanian · 03-24-2013, 01:29 AM

No problem, they sand out it just takes a bit of elbow grease or a commercial polishing wheel that does it much faster

mahanian · 03-24-2013, 01:31 AM

Quote:

Originally Posted by 68 Four on the Floor

Ill take one if you have any left

Quote:

Originally Posted by Mandojag

I'll take a polished one if you still have some.
Posted via Mobile Device

I think I have 2 available that the member "mailed payment" but it never showed up. I'll give it a few more business days and if the payments don't show up I'll let you know.

mahanian · 03-24-2013, 08:19 PM

For all the people that paid a deposit I'm planning on shipping later this week so send the remainder of you payment over the next day or two. If you are buying a polished one the remainder is $70 and unpolished one the remainder is $50.

Please make sure your shipping address in Paypal is accurate because I print the labels through paypal.

TripleNickel · 03-24-2013, 08:34 PM

Remaining $75 balance for the polished version was just sent via PayPal.

Thanks,

Wayne

nicolas72gmc · 03-24-2013, 10:41 PM

Jared, payment sent with addy. Can't wait to get it.

Posted via Mobile Device

**Smokinhart** · 03-24-2013, 11:04 PM

Remainder sent and look forward to seeing the plate arrive.
Posted via Mobile Device

ryanroo · 03-24-2013, 11:09 PM

Jared,
i sent a PM with the correct shipping address a while back. i dont even know how to set up paypal with an address. if it has one, i bet its incorrect.

if i need to send you the address again just let me know
Ryan

Smoothride · 03-25-2013, 08:56 AM

mahanian, ignore my PM I found your email address in the thread.

Money sent

humco · 03-25-2013, 01:07 PM

If you have or get more ill take one. (polished)
Posted via Mobile Device

mahanian · 03-25-2013, 05:11 PM

I will know by the end of the week if I have any left, still waiting on about half the payments but I'll start shipping them soon to the guys I've received full payment from

Street Smart · 03-25-2013, 09:01 PM

Balance sent thru paypal, thanks. Charles Krause.

magntik · 03-25-2013, 10:34 PM

Sent remainder last night.
Thanks again

magntik · 03-25-2013, 10:35 PM

Sent remainder last night.
Thanks again

pumpkin · 03-26-2013, 10:58 AM

Are there some still available? I am wanting one possably two.

mahanian · 03-26-2013, 01:08 PM

Just an FYI, I will be out of town all next week so I'm hoping to get them shipped out this week. If you still owe money and don't pay before Friday then it will be at least a week before your radio plate gets shipped.

Quote:

Originally Posted by pumpkin

Are there some still available? I am wanting one possably two.

I may have some left, not sure yet.

Smoothride · 03-26-2013, 01:11 PM

Quote:

Originally Posted by Smoothride

mahanian, ignore my PM I found your email address in the thread.

Money sent

Did you receive my payment?

Thanks

mahanian · 03-26-2013, 01:13 PM

Quote:

Originally Posted by Smoothride

Did you receive my payment?

Thanks

Yes, everyone that has PM'd me or posted in the thread that they sent the payment I've gotten it. Sorry, just received so many PM's and messages I haven't been able to respond to each one

mahanian · 03-28-2013, 12:20 PM

Just an update, my polisher is pretty backed up so he won't have them complete till Wednesday of next week. Fasteners came in today so I have everything else ready!

I'm still waiting on several payments, I'll start sending out PM's this weekend as reminders. Thanks to all those that have paid!

03-20-2013, 02:25 PM	#101
Smoothride Registered User Join Date: Sep 2007 Location: Houston, tx Posts: 100	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run put me on the list...Let me know when to send full payment for a polish one. Thanks

03-20-2013, 06:32 PM	#104
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Ill take one if you have any left

03-21-2013, 04:29 AM	#105
zzz_still Registered User Join Date: Nov 2012 Location: Nashville Posts: 5	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Ah, ok. I think I'd like to change to polished as well

03-24-2013, 12:15 AM	#106
Mandojag Registered User Join Date: Feb 2012 Location: Houston, TX Posts: 3	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I'll take a polished one if you still have some. Posted via Mobile Device

03-24-2013, 12:42 AM	#107
Sklptrljay Registered User Join Date: Apr 2012 Location: Stillwater, Oklahoma Posts: 874	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Can you change mine to polished please? I didn't realize there would be so much tooling marks.

03-24-2013, 01:29 AM	#108
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run No problem, they sand out it just takes a bit of elbow grease or a commercial polishing wheel that does it much faster __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

03-24-2013, 08:19 PM	#110
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run For all the people that paid a deposit I'm planning on shipping later this week so send the remainder of you payment over the next day or two. If you are buying a polished one the remainder is $70 and unpolished one the remainder is $50. Please make sure your shipping address in Paypal is accurate because I print the labels through paypal. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

03-24-2013, 08:34 PM	#111
TripleNickel Registered User Join Date: May 2010 Location: Akron, Ohio Posts: 154	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Remaining $75 balance for the polished version was just sent via PayPal. Thanks, Wayne

03-24-2013, 10:41 PM	#112
nicolas72gmc Registered User Join Date: Aug 2008 Location: Sunny Arizona Posts: 525	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Jared, payment sent with addy. Can't wait to get it. Posted via Mobile Device __________________ Nick "Everyone has a plan, 'till they get punched in the mouth".........Mike Tyson 1968, GMC, SWB, Project 1972, GMC, LWB, Daily Driver, 383, headers, 2.5"/3" exhaust, 200r4, 3.5/5 ECE components. 1972, C/10, LWB, 350 vortec, th350

03-24-2013, 11:04 PM	#113
Smokinhart Registered User Join Date: Sep 2012 Location: Manhattan, Kansas Posts: 31	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Remainder sent and look forward to seeing the plate arrive. Posted via Mobile Device

03-24-2013, 11:09 PM	#114
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Jared, i sent a PM with the correct shipping address a while back. i dont even know how to set up paypal with an address. if it has one, i bet its incorrect. if i need to send you the address again just let me know Ryan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

03-25-2013, 08:56 AM	#115
Smoothride Registered User Join Date: Sep 2007 Location: Houston, tx Posts: 100	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run mahanian, ignore my PM I found your email address in the thread. Money sent

03-25-2013, 01:07 PM	#116
humco Registered User Join Date: Sep 2011 Location: vacaville Ca Posts: 96	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run If you have or get more ill take one. (polished) Posted via Mobile Device

03-25-2013, 05:11 PM	#117
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I will know by the end of the week if I have any left, still waiting on about half the payments but I'll start shipping them soon to the guys I've received full payment from __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

03-25-2013, 09:01 PM	#118
Street Smart Registered User Join Date: Dec 2009 Location: Brooklyn N.Y. Posts: 819	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Balance sent thru paypal, thanks. Charles Krause. __________________ 1967 GMC Suburban, Supercharged 6.2 LS with a 6l80e , my 11 second tow vehicle! pic in my profile 1987 GMC CrewCab Dually 6.0 LS/6L90e, new tow pig. http://67-72chevytrucks.com/gallery/...=74049&cat=500



Register or Log In To remove these advertisements.

03-25-2013, 10:34 PM	#119
magntik Registered User Join Date: Oct 2005 Location: Iowa Posts: 67	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Sent remainder last night. Thanks again

03-25-2013, 10:35 PM	#120
magntik Registered User Join Date: Oct 2005 Location: Iowa Posts: 67	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Sent remainder last night. Thanks again

03-26-2013, 10:58 AM	#121
pumpkin Registered User Join Date: Apr 2006 Location: East Sooke B.C. Canada Posts: 543	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Are there some still available? I am wanting one possably two.

03-28-2013, 12:20 PM	#125
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Just an update, my polisher is pretty backed up so he won't have them complete till Wednesday of next week. Fasteners came in today so I have everything else ready! I'm still waiting on several payments, I'll start sending out PM's this weekend as reminders. Thanks to all those that have paid! __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.