GA parting 1972 cheyenne - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevNut · 05-12-2013, 01:13 PM

Interested on the wood grain door panel inserts, the dash pad, and the glove box door, let me know if selling separate, and prices. Thank you.
Posted via Mobile Device

**southern parts** · 05-15-2013, 06:02 AM

ttt

72C20Highlander · 05-15-2013, 08:48 AM

Could you post photo of power steering pump w/ lines, brackets, and pulley, What motor is it off? I need same for 402 BB.

dart_451 · 05-16-2013, 09:30 AM

hi, do you still have the power steering gear box? and how much shipped to ks 66611.

Steve Cole · 05-16-2013, 09:56 AM

I need the rod the goes from the inside door handle to the cam that the lock/unlock knob is connected to. ( passenger side). My truck is a 68 but I assume it will fit. Can you give me a shipped price to 28041 ?
Posted via Mobile Device

68corvair · 05-16-2013, 08:38 PM

Interested in a.c. vents and defrost vents . Can pick up in commerce sat.
Please give price and condition.

Ed

**southern parts** · 05-16-2013, 10:47 PM

72c20highlander- this truck has a 350 in it. I have a ps setup from a 402. $150 plus shipping.

dart_451- $50 plus shipping on the gear box. I think it will fit into a large flat rate box. it may be late Saturday before I can check.

Steve Cole- $5 plus shipping. again Saturday before I can check shipping. I have to pack for the swap meet tomorrow when I get in from work.

68corvair -Chrome is nice on these. $75 for all three a/c vents. throw in the defrost vents for free.

Steve Cole · 05-16-2013, 11:56 PM

I'll take it. Please be sure to include the retaining clips. Sorry for my ignorance, but Is Paypal ok? Either way, just give me the total to 28041. Thanks.
Posted via Mobile Device

jr71 · 05-17-2013, 07:34 PM

how r the cab braces?

68corvair · 05-17-2013, 08:41 PM

Going to pass on a.c. vents. Thanks

Ed

**southern parts** · 05-19-2013, 07:29 AM

pm,s sent to steve cole & dart_451

jr71- one of the cab braces will have to be replaced

woodfork1 · 05-19-2013, 04:45 PM

Im in the market for a new cab roof if your willing to sale.

**southern parts** · 05-19-2013, 10:57 PM

I`m not going to cut up or part the cab out. it does need some work but is still very repairable. $200 with nothing on it but the paint. comes with a clear title.

woodfork1 · 05-20-2013, 07:23 AM

How is the rust around the roof and doors? If I move on the purchase I mainly need the roof. I don't mind doing a little work on it. Pictures around those areas would be very helpful.

**southern parts** · 05-20-2013, 04:50 PM

it will need a outer roof skin and some other patches. here`s a few pics. there`s no rust inside above the windshield or on the cowl , both drip rails above the doors are good (some surface rust and flaking paint). I have more pics of the floor, kick panels, and cowl if anybody`s interested

**southern parts** · 05-20-2013, 05:00 PM

few more. it will need some floor patches and a drivers rear cab support

camrycurt · 05-29-2013, 10:24 AM

Do you still happen to have the soft ray door glass (both sides)? How much for the glass with the attached bottom frame that fits into the regulator shipped to 20176?

Thanks!

**southern parts** · 05-29-2013, 04:47 PM

I do, $50 plus shipping for the pair (with the bottom frames) shipping is going to be about $26 for standard post or $31 for priority mail.

camrycurt · 05-30-2013, 02:08 PM

Quote:

Originally Posted by southern parts

I do, $50 plus shipping for the pair (with the bottom frames) shipping is going to be about $26 for standard post or $31 for priority mail.

Cool. What's the condition of the glass like? Any significant scratches or chips?

tealgmc · 05-30-2013, 07:21 PM

I'd be interested in the windshield wiper switch.
nice truck by the way.

**southern parts** · 05-31-2013, 02:49 PM

camrycurt- no chips but some scratches, mainly on the drivers side. I tried to get some pics but all you can see is the reflection in the glass.

tealgmc- $10 shipped on the wiper switch

1972K20 · 05-31-2013, 04:54 PM

Are the doors sold?

**southern parts** · 05-31-2013, 04:59 PM

pass door is sold, drivers side has rust on the bottom.

1972K20 · 05-31-2013, 05:47 PM

How bad is the rust? Pics? Price?

**southern parts** · 06-02-2013, 09:21 AM

bare door shell. $35 (no trim, no guts )

05-12-2013, 01:13 PM	#101
67ChevNut Registered User Join Date: Mar 2009 Location: Eagle Pass, Posts: 195	Re: parting 1972 cheyenne Interested on the wood grain door panel inserts, the dash pad, and the glove box door, let me know if selling separate, and prices. Thank you. Posted via Mobile Device

05-15-2013, 06:02 AM	#102
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1972 cheyenne ttt

05-15-2013, 08:48 AM	#103
72C20Highlander Registered User Join Date: May 2013 Location: Co. Posts: 37	Re: parting 1972 cheyenne Could you post photo of power steering pump w/ lines, brackets, and pulley, What motor is it off? I need same for 402 BB. __________________ 1972 Custom Deluxe 20 Highlander Pkg, 402, TH400, Factory AC, Original Survivor. 1969 Custom Camper/20, 350, TH400, Wood Bed, Survivor.

05-16-2013, 09:30 AM	#104
dart_451 Registered User Join Date: May 2007 Location: topeka,ks Posts: 77	Re: parting 1972 cheyenne hi, do you still have the power steering gear box? and how much shipped to ks 66611.

05-16-2013, 09:56 AM	#105
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: parting 1972 cheyenne I need the rod the goes from the inside door handle to the cam that the lock/unlock knob is connected to. ( passenger side). My truck is a 68 but I assume it will fit. Can you give me a shipped price to 28041 ? Posted via Mobile Device

05-16-2013, 08:38 PM	#106
68corvair Registered User Join Date: Feb 2012 Location: piedmont s.c. Posts: 55	Re: parting 1972 cheyenne Interested in a.c. vents and defrost vents . Can pick up in commerce sat. Please give price and condition. Ed

05-16-2013, 10:47 PM	#107
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1972 cheyenne 72c20highlander- this truck has a 350 in it. I have a ps setup from a 402. $150 plus shipping. dart_451- $50 plus shipping on the gear box. I think it will fit into a large flat rate box. it may be late Saturday before I can check. Steve Cole- $5 plus shipping. again Saturday before I can check shipping. I have to pack for the swap meet tomorrow when I get in from work. 68corvair -Chrome is nice on these. $75 for all three a/c vents. throw in the defrost vents for free.

05-16-2013, 11:56 PM	#108
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: parting 1972 cheyenne I'll take it. Please be sure to include the retaining clips. Sorry for my ignorance, but Is Paypal ok? Either way, just give me the total to 28041. Thanks. Posted via Mobile Device

05-17-2013, 07:34 PM	#109
jr71 Registered User Join Date: Apr 2013 Location: kenosha, wisconsin Posts: 8	Re: parting 1972 cheyenne how r the cab braces?

05-17-2013, 08:41 PM	#110
68corvair Registered User Join Date: Feb 2012 Location: piedmont s.c. Posts: 55	Re: parting 1972 cheyenne Going to pass on a.c. vents. Thanks Ed

05-19-2013, 07:29 AM	#111
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1972 cheyenne pm,s sent to steve cole & dart_451 jr71- one of the cab braces will have to be replaced

05-19-2013, 04:45 PM	#112
woodfork1 Registered User Join Date: Dec 2012 Location: Houma, LA Posts: 95	Re: parting 1972 cheyenne Im in the market for a new cab roof if your willing to sale.

05-19-2013, 10:57 PM	#113
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1972 cheyenne I`m not going to cut up or part the cab out. it does need some work but is still very repairable. $200 with nothing on it but the paint. comes with a clear title.

05-20-2013, 07:23 AM	#114
woodfork1 Registered User Join Date: Dec 2012 Location: Houma, LA Posts: 95	Re: parting 1972 cheyenne How is the rust around the roof and doors? If I move on the purchase I mainly need the roof. I don't mind doing a little work on it. Pictures around those areas would be very helpful.

05-20-2013, 04:50 PM	#115
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1972 cheyenne it will need a outer roof skin and some other patches. here`s a few pics. there`s no rust inside above the windshield or on the cowl , both drip rails above the doors are good (some surface rust and flaking paint). I have more pics of the floor, kick panels, and cowl if anybody`s interested Attached Images



Register or Log In To remove these advertisements.

05-20-2013, 05:00 PM	#116
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1972 cheyenne few more. it will need some floor patches and a drivers rear cab support Attached Images

05-29-2013, 10:24 AM	#117
camrycurt Registered User Join Date: Jul 2010 Location: Leesburg, VA Posts: 420	Re: parting 1972 cheyenne Do you still happen to have the soft ray door glass (both sides)? How much for the glass with the attached bottom frame that fits into the regulator shipped to 20176? Thanks! __________________ Curt 1970 C/10, 250 L6 with Rochester BV carb, SM465 4 speed, 3.73 open rear

05-29-2013, 04:47 PM	#118
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1972 cheyenne I do, $50 plus shipping for the pair (with the bottom frames) shipping is going to be about $26 for standard post or $31 for priority mail.

05-30-2013, 07:21 PM	#120
tealgmc Registered User Join Date: Oct 2010 Location: Tulsa Oklahoma Posts: 5	Re: parting 1972 cheyenne I'd be interested in the windshield wiper switch. nice truck by the way.

05-31-2013, 02:49 PM	#121
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1972 cheyenne camrycurt- no chips but some scratches, mainly on the drivers side. I tried to get some pics but all you can see is the reflection in the glass. tealgmc- $10 shipped on the wiper switch Attached Images

05-31-2013, 04:54 PM	#122
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: parting 1972 cheyenne Are the doors sold?

05-31-2013, 04:59 PM	#123
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1972 cheyenne pass door is sold, drivers side has rust on the bottom.

05-31-2013, 05:47 PM	#124
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: parting 1972 cheyenne How bad is the rust? Pics? Price?

06-02-2013, 09:21 AM	#125
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: parting 1972 cheyenne bare door shell. $35 (no trim, no guts ) Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.