Progress picture of the Jimmy - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JHickson6 · 03-21-2004, 09:58 PM

Hey, looks great Greg, after you get all those dents out of the sides, i'll give you my bedsides to pound out

Keep up the good work!

Jared

dinnut · 03-21-2004, 11:30 PM

wow! your really saving that thing and doing a lot of work to do it! good luck, i salute you!

lukecp · 03-22-2004, 12:10 AM

You have got some good metal working skills.....looks great!

*60apache4* · 03-24-2004, 01:54 AM

Nice work.

I had to replace the floor supports, rocker panels, cab and fender corners in my truck.

If it helps any you might consider the videos that ebfabman has put together.

Blue Beard · 03-24-2004, 09:28 AM

Great progress....

Looks like a good size parts yard....

What brand of truck cover is on the one sitting next to it?

*Gee_Emm* · 03-24-2004, 10:57 AM

Wolfe, see the thread about truck covers I gave my opinions on it there.

*Gee_Emm* · 07-04-2004, 10:15 AM

These are the only picutures I have of the progress since last time. I have been doing a lot of little stuff here and there on it. In the next couple weeks I will have some pics of actual progress.

The bedsides are pretty much the only sheet metal work I have left to do.

**Canadian694x4** · 07-05-2004, 01:42 PM

Wicked Work! Always great to see your progress!

*Gee_Emm* · 07-20-2004, 10:01 PM

Finally some real progress pics, freshly sandblasted and complete more or less. The black stuff is por-15 that I put on while I was replacing some parts like the kicks and cabsupports, I painted the insides of them

*Gee_Emm* · 07-20-2004, 10:08 PM

One chopped up pickup + one year = 1/2 Jimmy

NuBomb · 07-21-2004, 12:25 AM

extremely Impressive !!!!!

BobbyK · 07-21-2004, 03:15 AM

Man...that's a FREAK load of work you've done.
Awesome work man...just awesome!!!!

**Palf70Step** · 07-21-2004, 05:29 AM

Very Nice!!!

**Yukon Jack** · 07-21-2004, 09:47 AM

What a great job at saving a K5 - I'm definitely impressed!

Zumo · 07-21-2004, 09:56 AM

Wouldn't it have been easier to invent a time machine and go back in time and then just buy a new Jimmy?

Just kidding. Awesome work.

1970blazin · 07-21-2004, 10:10 AM

Nice job- Glad you used the same thread thru-out the restoration. I looked over the entire progress and am humbled!!! What perseverance and skill. Nice work!!
Diane

**raggedjim** · 07-21-2004, 11:59 AM

Gee, how did you ever take care of the window frame pitting (maybe I overlooked that part)

Heres a pic of the GMC on my tail gate, I sanded down to metal and never saw white paint, green all the way through to black then metal. Looks like it came that way. (ignore the rust...)

*Gee_Emm* · 07-21-2004, 06:33 PM

Hmm interesting, I don't know what to do for the tailgate paint scheme now. Does it look like there was a tailgate woodgrain band on the back, I kinda see some dots that look like they could be holes.

I managed to stumble upon a junkyard that I got 3 good windshield frame from so I am using one of them instead of trying to fix that other one that I got ripped off on.

FRENCHBLUE72 · 07-21-2004, 08:22 PM

GEE that is a true work of art you are very good at what you do..

**raggedjim** · 07-22-2004, 04:05 PM

No evidence of a woodgrain panel, the previous owner says it never had one either. I think those holes are rust...

If you have an extra windshield frame I would be interested in it, the corners of mine are iffy...

Roger

**Canadian694x4** · 07-23-2004, 04:10 PM

Gee Emm...Simply Amazing. Can't wait to see her finished! She's a Beaut!

moneyguru · 10-04-2004, 05:23 PM

Any updated pics on this project?

Everytime I look at it I'm in awe!

*Gee_Emm* · 10-04-2004, 05:59 PM

I finished painting the frame. I am working on little stuff right now, I am kinda stuck, I need some patch panels but the repros are crap so I need to find some off of a truck.

silvertonguedevil · 10-04-2004, 06:07 PM

I can't believe I have never ran across this post before. Nice Work. WOW!

*Gee_Emm* · 10-04-2004, 06:08 PM

I guess I should add the pics of the mockup I did of it a couple months ago. This is the way it looked for about 1/2 an hour, then it came back apart again. I just wanted to make sure that the top and everything else would line up. I was relieved after I got it all together, everything was perfect, it will just take some body shimming to get the doors to line up perfect.

03-21-2004, 09:58 PM	#101
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	Hey, looks great Greg, after you get all those dents out of the sides, i'll give you my bedsides to pound out Keep up the good work! Jared __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!

03-21-2004, 11:30 PM	#102
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	wow! your really saving that thing and doing a lot of work to do it! good luck, i salute you! __________________ 70 longbed 496/th400/Ford 9"

03-22-2004, 12:10 AM	#103
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	You have got some good metal working skills.....looks great! __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

03-24-2004, 09:28 AM	#105
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Great progress.... Looks like a good size parts yard.... What brand of truck cover is on the one sitting next to it? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

07-05-2004, 01:42 PM	#108
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Wicked Work! Always great to see your progress! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

03-24-2004, 01:54 AM	#104
60apache4 Account Suspended Join Date: Nov 2001 Location: Oregon Posts: 147	Nice work. I had to replace the floor supports, rocker panels, cab and fender corners in my truck. If it helps any you might consider the videos that ebfabman has put together.

03-24-2004, 10:57 AM	#106
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Wolfe, see the thread about truck covers I gave my opinions on it there.

07-04-2004, 10:15 AM	#107
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	These are the only picutures I have of the progress since last time. I have been doing a lot of little stuff here and there on it. In the next couple weeks I will have some pics of actual progress. The bedsides are pretty much the only sheet metal work I have left to do.

07-20-2004, 10:01 PM	#109
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Finally some real progress pics, freshly sandblasted and complete more or less. The black stuff is por-15 that I put on while I was replacing some parts like the kicks and cabsupports, I painted the insides of them

07-20-2004, 10:08 PM	#110
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	One chopped up pickup + one year = 1/2 Jimmy

07-21-2004, 12:25 AM	#111
NuBomb Registered User Join Date: Jan 2002 Location: Canton, Georgia, USA Posts: 1,119	extremely Impressive !!!!! __________________ Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman.

07-21-2004, 03:15 AM	#112
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Man...that's a FREAK load of work you've done. Awesome work man...just awesome!!!! __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

07-21-2004, 05:29 AM	#113
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Very Nice!!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-21-2004, 09:47 AM	#114
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	What a great job at saving a K5 - I'm definitely impressed! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

07-21-2004, 09:56 AM	#115
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Wouldn't it have been easier to invent a time machine and go back in time and then just buy a new Jimmy? Just kidding. Awesome work. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles



Register or Log In To remove these advertisements.

07-21-2004, 10:10 AM	#116
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	Nice job- Glad you used the same thread thru-out the restoration. I looked over the entire progress and am humbled!!! What perseverance and skill. Nice work!! Diane __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

07-21-2004, 11:59 AM	#117
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,476	Gee, how did you ever take care of the window frame pitting (maybe I overlooked that part) Heres a pic of the GMC on my tail gate, I sanded down to metal and never saw white paint, green all the way through to black then metal. Looks like it came that way. (ignore the rust...) __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Last edited by raggedjim; 10-21-2009 at 03:15 PM.

07-21-2004, 06:33 PM	#118
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Hmm interesting, I don't know what to do for the tailgate paint scheme now. Does it look like there was a tailgate woodgrain band on the back, I kinda see some dots that look like they could be holes. I managed to stumble upon a junkyard that I got 3 good windshield frame from so I am using one of them instead of trying to fix that other one that I got ripped off on.

07-21-2004, 08:22 PM	#119
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	GEE that is a true work of art you are very good at what you do..

07-22-2004, 04:05 PM	#120
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,476	No evidence of a woodgrain panel, the previous owner says it never had one either. I think those holes are rust... If you have an extra windshield frame I would be interested in it, the corners of mine are iffy... Roger __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203

07-23-2004, 04:10 PM	#121
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Gee Emm...Simply Amazing. Can't wait to see her finished! She's a Beaut! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

10-04-2004, 05:23 PM	#122
moneyguru Registered User Join Date: Oct 2002 Location: kalamazoo, mi Posts: 397	Any updated pics on this project? Everytime I look at it I'm in awe! __________________ "Do the things you fear to do and the death of fear is certain"

10-04-2004, 05:59 PM	#123
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	I finished painting the frame. I am working on little stuff right now, I am kinda stuck, I need some patch panels but the repros are crap so I need to find some off of a truck.

10-04-2004, 06:07 PM	#124
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	I can't believe I have never ran across this post before. Nice Work. WOW! __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

10-04-2004, 06:08 PM	#125
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	I guess I should add the pics of the mockup I did of it a couple months ago. This is the way it looked for about 1/2 an hour, then it came back apart again. I just wanted to make sure that the top and everything else would line up. I was relieved after I got it all together, everything was perfect, it will just take some body shimming to get the doors to line up perfect.

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode