OR 67-72 cross members

[STONEYDAROGE]

Very. Rear crossmember for wiring harness also 71 rear driver cab mount to 44460 thanks

[DLTruck1973]

Originally Posted by givememytoys

I have a 292 six are the 6/8 the same?

No sir. The 6 cyl is a different cross member because of where it mounts in the frame.

I am sorry but I do not have one for a 6cyl at this time. They are a little harder to come by.

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by STONEYDAROGE

Very. Rear crossmember for wiring harness also 71 rear driver cab mount to 44460 thanks

When you say "cab mount" are you talking about the bracket that rivets to the frame that holds the mount or the mount it self?

Let me know on that and I will get you prices.

Thank you,
Thomas

[northstar400]

I am interested in a engine cross member with towers for a 69 4X4-350 with 4 speed transmission, shipped to 78674. Thanks

[STONEYDAROGE]

the bracket that that goes on frame is what i need.i found a crossmember local so bracket is all i need to 44460 thanks.

[luckysmoke]

I'm looking for a crossmember and engine stands for a 70 Chevy K10 V8 shipped to 82009. Thanks! Jeff
Posted via Mobile Device

[DLTruck1973]

I currently am out of 4x4 engine stands. I do have one cross member with bad stands for $40.00 plus shipping.

I will let all interested parties know when there is some more inventory.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by STONEYDAROGE

the bracket that that goes on frame is what i need.i found a crossmember local so bracket is all i need to 44460 thanks.

Sorry but I am not sure which bracket or cross member you are refereeing to. Can you clarify and I will get back to you.

Thank you,
Thomas

[luckysmoke]

Originally Posted by DLTruck1973

I currently am out of 4x4 engine stands. I do have one cross member with bad stands for $40.00 plus shipping.

I will let all interested parties know when there is some more inventory.

Thank you,
Thomas

Hi Thomas, how much would this be shipped to me at 82009? Thanks, Nona
Posted via Mobile Device

[DLTruck1973]

Originally Posted by luckysmoke

Hi Thomas, how much would this be shipped to me at 82009? Thanks, Nona
Posted via Mobile Device

I can let you know tomorrow if that works.

Thank you,
Thomas

[luckysmoke]

That will work! Thanks! Nona

[DaHos]

In need of a drivers side front bed mount plate for a 3/4T 4wd......Should be 4" wide.....2wd is to narrow and the blazer is too wide........

[DLTruck1973]

Originally Posted by DaHos

In need of a drivers side front bed mount plate for a 3/4T 4wd......Should be 4" wide.....2wd is to narrow and the blazer is too wide........

Do you have a photo of one Dave? I should have it. From the cab going back, what position is it. From your description I am thinking the 3rd. Rivets to the top of the frame rail, yes?

Let me know.

Thomas

[DaHos]

Originally Posted by DLTruck1973

Do you have a photo of one Dave? I should have it. From the cab going back, what position is it. From your description I am thinking the 3rd. Rivets to the top of the frame rail, yes?

Let me know.

Thomas

Correct. 2 cross sill stands then the plate.

[DLTruck1973]

Originally Posted by DaHos

Correct. 2 cross sill stands then the plate.

Here you go Dave. I compared to a 71 K20. Looks to be the correct one for you. Minor pitting but very usable piece.

We need $22.00 to ship it to your door.

How is the business going there?

Let me know.

Thank you,
Thomas

[basswood]

do you have any upper rear shock mount rear crossmembers? if so shipped to 57201

[DLTruck1973]

Originally Posted by basswood

do you have any upper rear shock mount rear crossmembers? if so shipped to 57201

If you are looking for a C10 rear shock cross member for coil springs, I am fresh out of them at this time. They sell very fast when I have them.

Keep me in mind for other parts.

Thank you,
Thomas

[bodonaldson]

69 2wd 350 auto how much cross member sent to 30458 thanks

[DaHos]

Originally Posted by DLTruck1973

Here you go Dave. I compared to a 71 K20. Looks to be the correct one for you. Minor pitting but very usable piece.

We need $22.00 to ship it to your door.

How is the business going there?

Let me know.

Thank you,
Thomas

Ill take it ! PM me info please.......

[luckysmoke]

Originally Posted by DLTruck1973

I can let you know tomorrow if that works.

Thank you,
Thomas

Hi Thomas,

I was wondering if you were able to get a quote for this yet?

Thanks,

Nona

[DLTruck1973]

Originally Posted by luckysmoke

Hi Thomas,

I was wondering if you were able to get a quote for this yet?

Thanks,

Nona

Sorry for the delay Nona.

The 4x4 engine cross member without the stands is $40.00 plus $18.00 to ship for a total of $58.00

Here are a couple of photos. It is a nice piece that just needs paint.

Let me know and I will PM you payment information.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by bodonaldson

69 2wd 350 auto how much cross member sent to 30458 thanks

Cross member is $35.00

Shipping is $25.22

Total is $60.22

Let me know and I will PM you payment details.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by STONEYDAROGE

Very. Rear crossmember for wiring harness also 71 rear driver cab mount to 44460 thanks

Here you go if interested,

$30.00 for the cross member

$19.00 for shipping

Total is $49.00.

I will need to know if this is for a coil or leaf spring truck. There is a difference in the rivet holes. On a leaf spring truck the bottom holes are staggered where the rivets attach the cross member to the frame.

Same otherwise.

Let me know and I can PM payment information.

Thank you,
Thomas

[luckysmoke]

Originally Posted by DLTruck1973

Sorry for the delay Nona.

The 4x4 engine cross member without the stands is $40.00 plus $18.00 to ship for a total of $58.00

Here are a couple of photos. It is a nice piece that just needs paint.

Let me know and I will PM you payment information.

Thank you,
Thomas

Hi Thomas,

I'll take it! I'm trying to get this truck together and I'm missing this and some engine stands, then I can get it put together and out of my garage.

Thanks!

Nona

[DLTruck1973]

Originally Posted by luckysmoke

Hi Thomas,

I'll take it! I'm trying to get this truck together and I'm missing this and some engine stands, then I can get it put together and out of my garage.

Thanks!

Nona

PM on the way

Thank you,
Thomas