62 Burb project in the making. - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**sirJim** · 07-20-2018, 02:06 AM

With caps and rims on. Just having fun driving it for the summer.

**Captainfab** · 07-24-2018, 12:09 AM

That's what it is supposed to be about right? driving and enjoying them!

How has the weather been in Denmark?

**sirJim** · 07-24-2018, 12:01 PM

Quote:

Originally Posted by Captainfab

That's what it is supposed to be about right? driving and enjoying them!

How has the weather been in Denmark?

The weather has been the best in all the years I have been here as far as sun and warm, but the country is not set up for it need rain and the temperature could go down a bit. No A/C anywhere. so just have to go for a ride.

**sirJim** · 09-29-2018, 10:53 AM

Little bit more done.
Astro van front driver seat.

**Captainfab** · 09-30-2018, 12:26 AM

It looks like that fits fairly well. How is the height for sitting?

**sirJim** · 09-30-2018, 02:15 AM

They fit pretty good.
I need to drive it a bit more to figure out height.
It makes it a bit close with the stock steering column, with a tilt no problem.
I will probably drop it down about an inch, have to wait and see.

Quote:

Originally Posted by Captainfab

It looks like that fits fairly well. How is the height for sitting?

**sirJim** · 11-02-2018, 03:06 PM

Went into hibernation for the winter

cant wait for spring.

**Captainfab** · 11-02-2018, 11:55 PM

Do you have any upgrades to the Burb planned for the winter?

**sirJim** · 11-03-2018, 03:20 AM

It will have to wait til spring I have it hibernating at a friends place just to keep it warm and dry. About 2 hour drive one way but free. Planning on doing the rockers and bit on the floor kick panel area front passenger seat and see what else shows up. I thought I had a T5 from a 88 F body but dident work out. Makes it difficult not having a dismantling yard closer. Everything has to be transported to a container then shipped then customs 2 months later I get to play. I am thinking a T5 1352-176 or a 1352-196 would fit the Burb perfect. Problem is they are´nt around for a couple hundred so they end up under a grand here. Be nice if I could bring one home in my suitcase.

**Captainfab** · 11-04-2018, 12:19 AM

I sympathize with you guys in that part of the world not having somewhat easy access to parts for your trucks. It is getting tougher here for some parts as so many people are so willing to scrap 'old junk' cars and trucks and send them to China.

**sirJim** · 11-04-2018, 03:51 AM

Quote:

Originally Posted by Captainfab

I sympathize with you guys in that part of the world not having somewhat easy access to parts for your trucks. It is getting tougher here for some parts as so many people are so willing to scrap 'old junk' cars and trucks and send them to China.

Yea most of what got brought over even in Sweden is getting sent back to the states because there just are not that many left. We just have to keep them alive.

Average Joe · 11-18-2018, 11:10 PM

Cool 'Burb!

I just read through your build thread and saw you are from Danmark. My Pops is from Danmark. I still have cousins over there but my bestefar, bestemor, and aunts and uncles have all passed away.

Sub'd for future updates from a half breed here in the States. 😎

**sirJim** · 11-20-2018, 11:50 AM

Quote:

Originally Posted by Average Joe

Cool 'Burb!

I just read through your build thread and saw you are from Danmark. My Pops is from Danmark. I still have cousins over there but my bestefar, bestemor, and aunts and uncles have all passed away.

Sub'd for future updates from a half breed here in the States. 😎

Cool
Have you ever visited them?

Average Joe · 11-20-2018, 03:52 PM

Yep

Last time was in '98. I got to see my Aunt in Soro? And my other aunt just south of Alborg. I went back in '85 as well but I was pretty young on that trip.

**sirJim** · 11-20-2018, 05:02 PM

Quote:

Originally Posted by Average Joe

Yep

Last time was in '98. I got to see my Aunt in Soro? And my other aunt just south of Alborg. I went back in '85 as well but I was pretty young on that trip.

I´m about 45 min from soro.

**sirJim** · 04-14-2019, 06:55 AM

Been slowly starting up after the winter. Got the heater all fixed up new ranco valve in and all is good again. Got the passenger seat from the Astro van in as well. Been working on a buddys 62 stepside most of the winter, he is getting it ready for the customs evaluation and then the tax, hopefully the same as mine.

**Captainfab** · 04-14-2019, 11:21 PM

Did you find a new Ranco valve?

**sirJim** · 04-15-2019, 03:02 AM

Quote:

Originally Posted by Captainfab

Did you find a new Ranco valve?

Hi John Yes i found one at while back just got around to installing it.

**sirJim** · 04-15-2019, 03:08 AM

One of just taking out of hibernation.

**sirJim** · 04-21-2019, 04:12 AM

Quote:

Originally Posted by Captainfab

Did you find a new Ranco valve?

Looks like the part nr is Napa# 660-1000 for the diagraphm. Havent checked it.
that seals so it wont drip on the floor.

A write up on how to or not. https://www.pbase.com/czechman/ranco

**Captainfab** · 04-22-2019, 12:00 AM

Thank you for that info and link

Average Joe · 04-22-2019, 08:25 PM

Quote:

Originally Posted by sirJim

One of just taking out of hibernation.

Looking good sir!

**sirJim** · 04-23-2019, 07:32 AM

Quote:

Originally Posted by Average Joe

Looking good sir!

Thanks it is a work in progress as long as I kan keep drivning it im happy . Took a friend of mine for a ride for his 60th birthday last week he has cerebral palse and is confined to a wheelchair no natrual speach but I communication tablet Eye controled. We had a great time once we got him in and strapped down he never got to ride in his fathers when he was at young man. Loved suprising him.

**Captainfab** · 04-24-2019, 12:07 AM

Great memories for both of you........

**sirJim** · 04-28-2019, 03:05 AM

First race of the year Test and tune Malmo Sweeden, trying out the new clutch on the Jr. with team members. Good excuse to take a drive.

07-20-2018, 02:06 AM	#101
sirJim Senior Member Join Date: Sep 2016 Location: Denmark Posts: 308	Re: 62 Burb project in the making. With caps and rims on. Just having fun driving it for the summer. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=737695 62 burb in the making.

07-24-2018, 12:09 AM	#102
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 62 Burb project in the making. That's what it is supposed to be about right? driving and enjoying them! How has the weather been in Denmark? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-29-2018, 10:53 AM	#104
sirJim Senior Member Join Date: Sep 2016 Location: Denmark Posts: 308	Re: 62 Burb project in the making. Little bit more done. Astro van front driver seat. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=737695 62 burb in the making.

09-30-2018, 12:26 AM	#105
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 62 Burb project in the making. It looks like that fits fairly well. How is the height for sitting? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-02-2018, 03:06 PM	#107
sirJim Senior Member Join Date: Sep 2016 Location: Denmark Posts: 308	Re: 62 Burb project in the making. Went into hibernation for the winter cant wait for spring. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=737695 62 burb in the making.

11-02-2018, 11:55 PM	#108
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 62 Burb project in the making. Do you have any upgrades to the Burb planned for the winter? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-03-2018, 03:20 AM	#109
sirJim Senior Member Join Date: Sep 2016 Location: Denmark Posts: 308	Re: 62 Burb project in the making. It will have to wait til spring I have it hibernating at a friends place just to keep it warm and dry. About 2 hour drive one way but free. Planning on doing the rockers and bit on the floor kick panel area front passenger seat and see what else shows up. I thought I had a T5 from a 88 F body but dident work out. Makes it difficult not having a dismantling yard closer. Everything has to be transported to a container then shipped then customs 2 months later I get to play. I am thinking a T5 1352-176 or a 1352-196 would fit the Burb perfect. Problem is they are´nt around for a couple hundred so they end up under a grand here. Be nice if I could bring one home in my suitcase. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=737695 62 burb in the making.

11-04-2018, 12:19 AM	#110
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 62 Burb project in the making. I sympathize with you guys in that part of the world not having somewhat easy access to parts for your trucks. It is getting tougher here for some parts as so many people are so willing to scrap 'old junk' cars and trucks and send them to China. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-18-2018, 11:10 PM	#112
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	Re: 62 Burb project in the making. Cool 'Burb! I just read through your build thread and saw you are from Danmark. My Pops is from Danmark. I still have cousins over there but my bestefar, bestemor, and aunts and uncles have all passed away. Sub'd for future updates from a half breed here in the States. 😎 __________________ 1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843

11-20-2018, 03:52 PM	#114
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	Re: 62 Burb project in the making. Yep Last time was in '98. I got to see my Aunt in Soro? And my other aunt just south of Alborg. I went back in '85 as well but I was pretty young on that trip. __________________ 1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843

04-14-2019, 06:55 AM	#116
sirJim Senior Member Join Date: Sep 2016 Location: Denmark Posts: 308	Re: 62 Burb project in the making. Been slowly starting up after the winter. Got the heater all fixed up new ranco valve in and all is good again. Got the passenger seat from the Astro van in as well. Been working on a buddys 62 stepside most of the winter, he is getting it ready for the customs evaluation and then the tax, hopefully the same as mine. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=737695 62 burb in the making.

04-14-2019, 11:21 PM	#117
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 62 Burb project in the making. Did you find a new Ranco valve? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-15-2019, 03:08 AM	#119
sirJim Senior Member Join Date: Sep 2016 Location: Denmark Posts: 308	Re: 62 Burb project in the making. One of just taking out of hibernation. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=737695 62 burb in the making.

04-22-2019, 12:00 AM	#121
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 62 Burb project in the making. Thank you for that info and link __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-24-2019, 12:07 AM	#124
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 62 Burb project in the making. Great memories for both of you........ __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

04-28-2019, 03:05 AM	#125
sirJim Senior Member Join Date: Sep 2016 Location: Denmark Posts: 308	Re: 62 Burb project in the making. First race of the year Test and tune Malmo Sweeden, trying out the new clutch on the Jr. with team members. Good excuse to take a drive. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=737695 62 burb in the making.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.