1965/73 Cheap Build Up - Page 54 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Strodder · 03-16-2011, 11:02 PM

Yes it's a short bed. I have to measure the junk yard bed. Rhino lining is like a rubber coating, not as tough as Line-X. But that was my thought, or a bed mat. Again CHEAP.

bubba327 · 03-16-2011, 11:14 PM

I have thought about just using diamond plate with line-X over it. If you had access to cheap diamond plate. Shiny aluminum diamond plate would look neat , but probably not cheap!

198plus · 03-16-2011, 11:15 PM

I like the grill without the bowtie.

trevrolet65 · 03-16-2011, 11:23 PM

Quote:

Originally Posted by Strodder

I'm thinking of a metal bed floor from a doner newer truck bed with inner fenders. What do you guys think? Remember "Cheap Build". I just saw one at a Wrecking Yard. It was crushed on top of the bed, but the floor looked good. It might be cheap.

Yes sir, nice build. I'm gonna do the same thing with my sons truck, it's a stepper though. I've seen a few different year trucks done, and I like it.

Strodder · 03-16-2011, 11:24 PM

Quote:

Originally Posted by bubba327

I have thought about just using diamond plate with line-X over it. If you had access to cheap diamond plate. Shiny aluminum diamond plate would look neat , but probably not cheap!

Diamond plate's a thought. If a marine plywood was laid down, a thinner diamond plate would be a lot more affordable. I did a M/C trailer that way. And another one I made with outdoor carpet.

Strodder · 03-16-2011, 11:27 PM

Quote:

Originally Posted by trevrolet65

Yes sir, nice build. I'm gonna do the same thing with my sons truck, it's a stepper though. I've seen a few different year trucks done, and I like it.

Thanks Trev. Mines a Stepper also, but from a 73.

watahyahknow · 03-16-2011, 11:28 PM

i always surprised they don't use marine ply for the bed floor you Can make grooves in it with a router and lay polished aluminum strips in it with lock bolts trough it to mount it to the frame and then lacquered to a shine one sheet of ply should be pretty close to the size of the bed floor and most likely sheaper that a floorkit

that outdoor carpet looks nice too it might be a bice option if you have a top on the bed

bubba327 · 03-16-2011, 11:36 PM

forgot it was a stepper too.. my bad... No fender openings to mess with.. On a 60-66 short Fleet, the start of the fender openings are a little different from the newer models.
marine plywood would be really easy.

Grille is better without the Bowtie

Strodder · 03-17-2011, 08:53 PM

I painted the 57 Chevys frame that I'm working on today. I used Gloss Black KBS Coatings. I sprayed it on, and came out 100% better than POR-15.

watahyahknow · 03-17-2011, 09:12 PM

thats impressive you wouls allmost use it to paint a T ford body with it

Strodder · 03-17-2011, 10:04 PM

Looks like powder coated. It is supposed to be very durable, and is good to stop rust. Like POR-15. I've used POR-15 a few times, and this is much better in my opinion. It sprayed on real nice. and didn't want to run, plus it flowed out just like POR-15

ruffrida2005 · 03-17-2011, 10:10 PM

what's the cost diffrence between the two? POR and this?

Strodder · 03-17-2011, 10:15 PM

Same price. $44.95 a QT

likaroc13 · 03-17-2011, 11:15 PM

that looks great!

Strodder · 03-17-2011, 11:53 PM

Quote:

Originally Posted by likaroc13

that looks great!

Thanks likaroc. I wish it my truck being done that far.

daverod · 03-17-2011, 11:59 PM

I'll have to try that. I wasn't to impressed with pr stuff. Plus I like to spray stuff. Did you have to thin it? What size tip? Hope they have it here.

Looks nice.

shrunken66stroker · 03-18-2011, 12:14 AM

Does it come in satin or something less glossy?

Strodder · 03-18-2011, 10:54 AM

Quote:

Originally Posted by daverod

I'll have to try that. I wasn't to impressed with pr stuff. Plus I like to spray stuff. Did you have to thin it? What size tip? Hope they have it here.

Looks nice.

I didn't have to thin it, and don't know what size tip I sprayed it with. What ever came in the gun.

Strodder · 03-18-2011, 10:55 AM

Quote:

Originally Posted by shrunken66stroker

Does it come in satin or something less glossy?

Check out the web site. I want to get more.

http://www.kbs-coatings.com/topcoats.html

watahyahknow · 03-18-2011, 10:56 AM

i think its stamped somewhere in the nozzlehead but its pretty small lettering

Strodder · 03-18-2011, 11:09 AM

They do make a satin black.
http://www.kbs-coatings.com/blacktop.html
Posted via Mobile Device

daverod · 03-18-2011, 12:57 PM

Says it's just a top coat. You need to first paint it with rust seal. POR you can just paint over bare metel ( spray it with metal prep). It works out to cost twice as much. If you seal it with rust seal.

daverod · 03-18-2011, 01:01 PM

Quote:

Originally Posted by watahyahknow

i think its stamped somewhere in the nozzlehead but its pretty small lettering

Means he can't read it.

Strodder · 03-18-2011, 07:56 PM

Quote:

Originally Posted by daverod

Says it's just a top coat. You need to first paint it with rust seal. POR you can just paint over bare metel ( spray it with metal prep). It works out to cost twice as much. If you seal it with rust seal.

I just sprayed it on bare metal. You can us this if you want more rust protection. It also comes in colors. I'm going to try this next, and it's cheaper.

http://www.kbs-coatings.com/rustseal.html

kmdracer · 03-18-2011, 11:03 PM

Read all the posts...yeah, I'm a glutton...took a couple of days to read. Very nice build, love the door handles, still up in the air about the bed, but will wait to see it painted. What matters most is if YOU like it!

03-16-2011, 11:02 PM	#1326
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up Yes it's a short bed. I have to measure the junk yard bed. Rhino lining is like a rubber coating, not as tough as Line-X. But that was my thought, or a bed mat. Again CHEAP. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

03-16-2011, 11:14 PM	#1327
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: 1965/73 Cheap Build Up I have thought about just using diamond plate with line-X over it. If you had access to cheap diamond plate. Shiny aluminum diamond plate would look neat , but probably not cheap! __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

03-16-2011, 11:15 PM	#1328
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: 1965/73 Cheap Build Up I like the grill without the bowtie. __________________ My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl

03-16-2011, 11:28 PM	#1332
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 1965/73 Cheap Build Up i always surprised they don't use marine ply for the bed floor you Can make grooves in it with a router and lay polished aluminum strips in it with lock bolts trough it to mount it to the frame and then lacquered to a shine one sheet of ply should be pretty close to the size of the bed floor and most likely sheaper that a floorkit that outdoor carpet looks nice too it might be a bice option if you have a top on the bed __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts Last edited by watahyahknow; 03-16-2011 at 11:36 PM.

03-16-2011, 11:36 PM	#1333
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: 1965/73 Cheap Build Up forgot it was a stepper too.. my bad... No fender openings to mess with.. On a 60-66 short Fleet, the start of the fender openings are a little different from the newer models. marine plywood would be really easy. Grille is better without the Bowtie __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

03-17-2011, 08:53 PM	#1334
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up I painted the 57 Chevys frame that I'm working on today. I used Gloss Black KBS Coatings. I sprayed it on, and came out 100% better than POR-15. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

03-17-2011, 09:12 PM	#1335
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 1965/73 Cheap Build Up thats impressive you wouls allmost use it to paint a T ford body with it __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

03-17-2011, 10:04 PM	#1336
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up Looks like powder coated. It is supposed to be very durable, and is good to stop rust. Like POR-15. I've used POR-15 a few times, and this is much better in my opinion. It sprayed on real nice. and didn't want to run, plus it flowed out just like POR-15 __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT* Last edited by Strodder; 03-17-2011 at 10:05 PM.

03-17-2011, 10:10 PM	#1337
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: 1965/73 Cheap Build Up what's the cost diffrence between the two? POR and this? __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

03-17-2011, 10:15 PM	#1338
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up Same price. $44.95 a QT __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

03-17-2011, 11:15 PM	#1339
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: 1965/73 Cheap Build Up that looks great!

03-17-2011, 11:59 PM	#1341
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: 1965/73 Cheap Build Up I'll have to try that. I wasn't to impressed with pr stuff. Plus I like to spray stuff. Did you have to thin it? What size tip? Hope they have it here. Looks nice. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

03-18-2011, 12:14 AM	#1342
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: 1965/73 Cheap Build Up Does it come in satin or something less glossy? __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

03-18-2011, 10:56 AM	#1345
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 1965/73 Cheap Build Up i think its stamped somewhere in the nozzlehead but its pretty small lettering __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

03-18-2011, 11:09 AM	#1346
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up They do make a satin black. http://www.kbs-coatings.com/blacktop.html Posted via Mobile Device __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*



Register or Log In To remove these advertisements.

03-18-2011, 12:57 PM	#1347
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: 1965/73 Cheap Build Up Says it's just a top coat. You need to first paint it with rust seal. POR you can just paint over bare metel ( spray it with metal prep). It works out to cost twice as much. If you seal it with rust seal. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

03-18-2011, 11:03 PM	#1350
kmdracer Registered User Join Date: Jan 2011 Location: Wharton, Tx Posts: 31	Re: 1965/73 Cheap Build Up Read all the posts...yeah, I'm a glutton...took a couple of days to read. Very nice build, love the door handles, still up in the air about the bed, but will wait to see it painted. What matters most is if YOU like it!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.