1969 Short Wide - Page 54 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

swamp rat · 11-11-2013, 01:39 AM

Awesome work! Looks great!

nasqar · 11-11-2013, 05:10 AM

I am pretty sure that paint added some horsepower to that ride!!! Holy buckets that thing looks great.....How much longer do you think until it is all painted and assembled?

Crash_OK · 11-11-2013, 07:30 AM

Looks great Mike.. When are we putting the cab on the frame?

mcbassin · 11-11-2013, 09:11 AM

Quote:

Originally Posted by Zoomin

Wow, made great progress!

Thanks Steve.

Quote:

Originally Posted by Bennett68C10

Wow Mike that red looks awesome, great job

Thanks Keith

Quote:

Originally Posted by screaminchevypickup

Looking good mike..

Thanks Kyle, man I could sure use your paint booth. Had a lil trouble with the Imron clear. Just too foggy on the clear coat to see effectively. Now I have some runners to take care of.

Quote:

Originally Posted by jlsanborn

Great update! Really really really nice work there. That red is RED!!

Thanks. I'm pretty happy with my bodywork on these panels.

Quote:

Originally Posted by swamp rat

Awesome work! Looks great!

Thanks.

Quote:

Originally Posted by nasqar

I am pretty sure that paint added some horsepower to that ride!!! Holy buckets that thing looks great.....How much longer do you think until it is all painted and assembled?

Thanks. I'm kinda relying on the weather now but I'm shooting for Late Dec. - January for assembly.

Quote:

Originally Posted by Crash_OK

Looks great Mike.. When are we putting the cab on the frame?

Thanks Mark. I'm going to focus on finishing up the bed assembly. Not too sure I can put it together solo without scratching or damaging something? Also have a few runs I have to sand out of the clear first. Maybe this week though.

Low Elco · 11-11-2013, 09:24 AM

BTDT on killing a nice panel. I managed to do it twice. Finished parts look great! Man, that's RED!

**FL71C10** · 11-11-2013, 10:33 AM

Nice going, good to see color going on!

mcbassin · 11-11-2013, 03:04 PM

Quote:

Originally Posted by Low Elco

BTDT on killing a nice panel. I managed to do it twice. Finished parts look great! Man, that's RED!

Thanks for the compliment. I wish I could say I've only done it twice.. I'm pretty sure I didn't wait long enough between clear coats.

Quote:

Originally Posted by FL71C10

Nice going, good to see color going on!

Thanks. It is good to see some red paint. I was getting sick of sanding on these panels. It gets pretty old after a while.

mcbassin · 11-11-2013, 11:17 PM

Here ya go Rob, I hope this helps. Like I said, I have an older model Sure Fit unit but I'm going to make it work. The main reason I made the brackets the whole unit kinda sagged from the weight when I shifted it forward towards the firewall.

mcbassin · 11-11-2013, 11:23 PM

I made a new cover for my Vintage Air connection today. It's just raw machined now but it will be polished when finished. I used the original rubber grommets that came with it. I'm hoping the A/C hoses will mount up then I'll be able to put the bolts in from the inside. Just didn't care for the plastic cover and the fittings didn't hit quite right.

Old left / New right

Inside view

nasqar · 11-11-2013, 11:34 PM

wow

Zoomin · 11-11-2013, 11:37 PM

Mike, when I read your posts two words jump out at me - "I made"

There are so many things you put time and effort into that most people will never see, yet you keep on doing it. That's what separates you from the pack and why your project is so freaking cool. There's so much there.

Keep it going, can't wait to see more.

mcbassin · 11-12-2013, 12:09 AM

Quote:

Originally Posted by nasqar

wow

Thanks Eddie.

Quote:

Originally Posted by Zoomin

Mike, when I read your posts two words jump out at me - "I made"

There are so many things you put time and effort into that most people will never see, yet you keep on doing it. That's what separates you from the pack and why your project is so freaking cool. There's so much there.

Keep it going, can't wait to see more.

Thanks Steve. I really enjoy making stuff for this old project. It slows things down but it's kinda rewarding. I have a lot of ideas. Just trying to get this thing painted so I can move on to things more that are more fun.

**screaminchevypickup** · 11-12-2013, 12:46 AM

Great work mike..

Low Elco · 11-12-2013, 11:16 AM

Nice piece! I miss being able to just turn stuff out like that. Looks a lot nicer than the plastic piece.

mcbassin · 11-13-2013, 09:48 PM

Quote:

Originally Posted by screaminchevypickup

Great work mike..

Thanks Kyle. and thanks for the help today.

Quote:

Originally Posted by Low Elco

Nice piece! I miss being able to just turn stuff out like that. Looks a lot nicer than the plastic piece.

Thanks. Nothing better than access to cool machining centers and cad/cam software. Only limit is imagination and time.

mcbassin · 11-13-2013, 09:51 PM

I got some cutting and buffing lessons today, thanks again Kyle.

**screaminchevypickup** · 11-13-2013, 10:47 PM

Nice!!

jlsanborn · 11-13-2013, 10:53 PM

Man, the machined piece is over the top. I'd love to have even a drill press in my shop let alone the gear you've got. The paint is soooo sweet too!!! Nice job McB!

Bennett68C10 · 11-13-2013, 11:18 PM

That looks great Mike

Zoomin · 11-13-2013, 11:33 PM

Quote:

Originally Posted by mcbassin

I got some cutting and buffing lessons today, thanks again Kyle.

You did well, grasshopper

jlsanborn · 11-13-2013, 11:45 PM

Man, the machined piece is over the top. I'd love to have even a drill press in my shop let alone the gear you've got. The paint is soooo sweet too!!! Nice job McB!

litew8 · 11-14-2013, 12:24 AM

Nice work

Low Elco · 11-14-2013, 09:23 AM

Lookin' Gooooooood!

my67chevytruck · 11-14-2013, 10:28 AM

Very Nice Work Mike.....

mcbassin · 11-14-2013, 12:12 PM

Quote:

Originally Posted by screaminchevypickup

Nice!!

Quote:

Originally Posted by jlsanborn

Man, the machined piece is over the top. I'd love to have even a drill press in my shop let alone the gear you've got. The paint is soooo sweet too!!! Nice job McB!

Quote:

Originally Posted by Bennett68C10

That looks great Mike

Quote:

Originally Posted by Zoomin

You did well, grasshopper

Quote:

Originally Posted by litew8

Nice work

Quote:

Originally Posted by Low Elco

Lookin' Gooooooood!

Quote:

Originally Posted by my67chevytruck

Very Nice Work Mike.....

Thanks guys!

11-11-2013, 01:39 AM	#1326
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: 1969 Short Wide Awesome work! Looks great! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

11-11-2013, 05:10 AM	#1327
nasqar Here kitty kitty kitty Join Date: Aug 2010 Location: Perrysville, IN Posts: 548	Re: 1969 Short Wide I am pretty sure that paint added some horsepower to that ride!!! Holy buckets that thing looks great.....How much longer do you think until it is all painted and assembled?

11-11-2013, 07:30 AM	#1328
Crash_OK Registered User Join Date: Nov 2011 Location: Edmond, OK. Posts: 1,362	Re: 1969 Short Wide Looks great Mike.. When are we putting the cab on the frame? __________________ Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build

11-11-2013, 09:24 AM	#1330
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: 1969 Short Wide BTDT on killing a nice panel. I managed to do it twice. Finished parts look great! Man, that's RED! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

11-11-2013, 10:33 AM	#1331
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: 1969 Short Wide Nice going, good to see color going on! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

11-11-2013, 11:17 PM	#1333
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 Short Wide Here ya go Rob, I hope this helps. Like I said, I have an older model Sure Fit unit but I'm going to make it work. The main reason I made the brackets the whole unit kinda sagged from the weight when I shifted it forward towards the firewall. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-11-2013, 11:23 PM	#1334
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 Short Wide I made a new cover for my Vintage Air connection today. It's just raw machined now but it will be polished when finished. I used the original rubber grommets that came with it. I'm hoping the A/C hoses will mount up then I'll be able to put the bolts in from the inside. Just didn't care for the plastic cover and the fittings didn't hit quite right. Old left / New right Inside view __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 11-11-2013 at 11:40 PM.

11-11-2013, 11:34 PM	#1335
nasqar Here kitty kitty kitty Join Date: Aug 2010 Location: Perrysville, IN Posts: 548	Re: 1969 Short Wide wow

11-11-2013, 11:37 PM	#1336
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 1969 Short Wide Mike, when I read your posts two words jump out at me - "I made" There are so many things you put time and effort into that most people will never see, yet you keep on doing it. That's what separates you from the pack and why your project is so freaking cool. There's so much there. Keep it going, can't wait to see more. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

11-12-2013, 12:46 AM	#1338
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: 1969 Short Wide Great work mike.. __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

11-12-2013, 11:16 AM	#1339
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: 1969 Short Wide Nice piece! I miss being able to just turn stuff out like that. Looks a lot nicer than the plastic piece. __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

11-13-2013, 09:51 PM	#1341
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 Short Wide I got some cutting and buffing lessons today, thanks again Kyle. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-13-2013, 10:47 PM	#1342
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: 1969 Short Wide Nice!! __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

11-13-2013, 10:53 PM	#1343
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: 1969 Short Wide Man, the machined piece is over the top. I'd love to have even a drill press in my shop let alone the gear you've got. The paint is soooo sweet too!!! Nice job McB! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

11-13-2013, 11:18 PM	#1344
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 1969 Short Wide That looks great Mike __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10



Register or Log In To remove these advertisements.

11-13-2013, 11:45 PM	#1346
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: 1969 Short Wide Man, the machined piece is over the top. I'd love to have even a drill press in my shop let alone the gear you've got. The paint is soooo sweet too!!! Nice job McB! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

11-14-2013, 12:24 AM	#1347
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: 1969 Short Wide Nice work __________________ project: "my happy mess"

11-14-2013, 09:23 AM	#1348
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: 1969 Short Wide Lookin' Gooooooood! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

11-14-2013, 10:28 AM	#1349
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1969 Short Wide Very Nice Work Mike..... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.