Header Solution - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AJs72K5 · 09-10-2009, 11:19 PM

I guess not. Too bad, they looked promising.

**Jokers69** · 09-10-2009, 11:45 PM

Sorry for the delay. I just got back into town. I will check on them tomorrow and let you know asap.

AJs72K5 · 09-10-2009, 11:47 PM

Thanks.

AJs72K5 · 09-11-2009, 07:44 PM

.....

Dan 67 Chevy LWB · 09-12-2009, 11:51 AM

Have you gotten the Big Block ones complete in Stainless Steel?

What is the specifications? Tube Diameter? Collector size and type?

What motor mount are you using?

I'm interested in ordering a set, but need to find out what is available?

Willys47 · 09-12-2009, 12:02 PM

x2

**Jokers69** · 09-14-2009, 03:04 PM

The BBC headers will not be ready until mid October. They are 2" primaries with 3" ball and socket or 3.5 " flanged collectors. I will keep you guys updated as I get them. Thanks

AJs72K5 · 10-01-2009, 09:50 PM

October 1st bump. What's the progress?

**Jokers69** · 10-02-2009, 12:35 AM

We have got the tooling for 3.5" collector and the fixtures are almost done should hopefully be finished this weekend.

mplex2000 · 10-06-2009, 04:09 PM

I'm interested as well, for the big block headers. Need to know the details on the type of motor mounts used, etc like the other guy.

70stroker · 10-06-2009, 08:55 PM

Are the BBC ones ready yet?

**Jokers69** · 10-08-2009, 09:21 PM

They are real close to being done. I will post some pics and update progress soon as they are done.

AJs72K5 · 10-18-2009, 04:10 PM

Any update?

**Jokers69** · 10-19-2009, 09:41 PM

I get back in town on thursday. If my flight is on time I will stop by on my way home. If not I will go there first thing in the morning friday.

AJs72K5 · 10-24-2009, 09:15 PM

Is there any way we can get the name of the shop doing these so we can contact them directly? I'm not feeling good about this and may just go with an off-the-shelf set.

69trk · 10-24-2009, 09:42 PM

That's what i ended up doing. I couldn't keep waiting for these...

**Jokers69** · 10-26-2009, 01:31 PM

PM sent

68C10HotRod · 11-23-2009, 01:26 PM

Can the SBC version be built with LT1 D-port flanges? Do you know if they'll clear everything using '72 OEM SBC towers & pads for the LT1 & 6spd Manual using a hydraulic clutch?

Thanks for putting this together & even doing the BBC version - might be getting a set of those for a 72 BB Burb myself. Both versions look SWEET.

**Jokers69** · 11-24-2009, 02:20 AM

Yes they can be made with lt-1 d port flanges. As far as fitting that setup I would not know. You can pm me some measurements and photos and I'll do my best to find out if they will fit. I don't think we will be able to find a local truck with that same setup.

PS one side of the BB headers are done. Working on the other side then one last test fit.

chevy71c10 · 12-16-2009, 10:17 PM

Jokers69, I'm interested in a set of your coated headers with the D-ports and 3" ball/socket collector. I'm currently doing a frame-off on a 71 SWB C10 and will be installing a 95 LT1 with 700R4 trans. Can you provide contact info, pricing and delivery time?

Thanks,
Justin

**Jokers69** · 12-18-2009, 03:23 AM

Pm sent

**Hart_Rod** · 12-18-2009, 12:16 PM

Can you post a price list for the different variations?

**Jokers69** · 12-18-2009, 04:35 PM

The BB headers are $575.00 bare and around 925.00coated 2" primaries and 3.5" collectors. This is a pic of first production one with the prototype. We will be test fitiing them later today or monday. Thanks

70stroker · 12-18-2009, 05:17 PM

absolutley interested. shoot some pics of them installed on monday, if they are above the frame rails you got atleast me sold on them. any chance of getting them with ball and socket type flanges?

**Hart_Rod** · 12-18-2009, 06:03 PM

Quote:

Originally Posted by Jokers69

The BB headers are $575.00 bare and around 850-900 coated ( need to have coater look at them and give us a quote on coating) 2" primaries and 3.5" collectors. This is a pic of first production one with the prototype. We will be test fitiing them later today or monday. Thanks

I was referring to the SB ones.

09-10-2009, 11:19 PM	#126
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Header Solution I guess not. Too bad, they looked promising. __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

09-10-2009, 11:45 PM	#127
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution Sorry for the delay. I just got back into town. I will check on them tomorrow and let you know asap.

09-10-2009, 11:47 PM	#128
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Header Solution Thanks. __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

09-11-2009, 07:44 PM	#129
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Header Solution ..... __________________ - AJ Gray Matter Build - 1972 K5 with some stuff Last edited by AJs72K5; 09-11-2009 at 07:52 PM.

09-12-2009, 11:51 AM	#130
Dan 67 Chevy LWB Registered User Join Date: Nov 2008 Location: Midlothian, TX Posts: 69	Re: Header Solution Have you gotten the Big Block ones complete in Stainless Steel? What is the specifications? Tube Diameter? Collector size and type? What motor mount are you using? I'm interested in ordering a set, but need to find out what is available? __________________ Dan 67 Chevy LWB, Small Window - In the process of being rebuilt. Small Block is coming out & I'm gathering parts to switch to a Big Block 496.

09-12-2009, 12:02 PM	#131
Willys47 Registered User Join Date: Dec 2007 Location: Nanaimo B.C. Posts: 604	Re: Header Solution x2 __________________ I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!!

09-14-2009, 03:04 PM	#132
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution The BBC headers will not be ready until mid October. They are 2" primaries with 3" ball and socket or 3.5 " flanged collectors. I will keep you guys updated as I get them. Thanks Last edited by Jokers69; 09-14-2009 at 03:05 PM.

10-01-2009, 09:50 PM	#133
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Header Solution October 1st bump. What's the progress? __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

10-02-2009, 12:35 AM	#134
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution We have got the tooling for 3.5" collector and the fixtures are almost done should hopefully be finished this weekend.

10-06-2009, 04:09 PM	#135
mplex2000 Registered User Join Date: Jul 2005 Location: DFW Posts: 463	Re: Header Solution I'm interested as well, for the big block headers. Need to know the details on the type of motor mounts used, etc like the other guy.

10-06-2009, 08:55 PM	#136
70stroker Registered User Join Date: Jan 2007 Location: pittsburg kansas Posts: 894	Re: Header Solution Are the BBC ones ready yet? __________________ 70 GMC build: http://67-72chevytrucks.com/vboard/s...d.php?t=613130

10-08-2009, 09:21 PM	#137
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution They are real close to being done. I will post some pics and update progress soon as they are done.

10-18-2009, 04:10 PM	#138
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Header Solution Any update? __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

10-19-2009, 09:41 PM	#139
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution I get back in town on thursday. If my flight is on time I will stop by on my way home. If not I will go there first thing in the morning friday.

10-24-2009, 09:15 PM	#140
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: Header Solution Is there any way we can get the name of the shop doing these so we can contact them directly? I'm not feeling good about this and may just go with an off-the-shelf set. __________________ - AJ Gray Matter Build - 1972 K5 with some stuff



Register or Log In To remove these advertisements.

10-24-2009, 09:42 PM	#141
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: Header Solution That's what i ended up doing. I couldn't keep waiting for these... __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

10-26-2009, 01:31 PM	#142
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution PM sent

11-23-2009, 01:26 PM	#143
68C10HotRod Registered User Join Date: Feb 2008 Location: Omaha, NE 68144 Posts: 333	Re: Header Solution Can the SBC version be built with LT1 D-port flanges? Do you know if they'll clear everything using '72 OEM SBC towers & pads for the LT1 & 6spd Manual using a hydraulic clutch? Thanks for putting this together & even doing the BBC version - might be getting a set of those for a 72 BB Burb myself. Both versions look SWEET. __________________ Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery)

11-24-2009, 02:20 AM	#144
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution Yes they can be made with lt-1 d port flanges. As far as fitting that setup I would not know. You can pm me some measurements and photos and I'll do my best to find out if they will fit. I don't think we will be able to find a local truck with that same setup. PS one side of the BB headers are done. Working on the other side then one last test fit. Last edited by Jokers69; 11-24-2009 at 02:22 AM.

12-16-2009, 10:17 PM	#145
chevy71c10 Registered User Join Date: Oct 2009 Location: Panama City Beach, FL Posts: 228	Re: Header Solution Jokers69, I'm interested in a set of your coated headers with the D-ports and 3" ball/socket collector. I'm currently doing a frame-off on a 71 SWB C10 and will be installing a 95 LT1 with 700R4 trans. Can you provide contact info, pricing and delivery time? Thanks, Justin

12-18-2009, 03:23 AM	#146
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution Pm sent

12-18-2009, 12:16 PM	#147
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Header Solution Can you post a price list for the different variations? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

12-18-2009, 04:35 PM	#148
Jokers69 Active Member Join Date: Aug 2008 Location: Washington Posts: 147	Re: Header Solution The BB headers are $575.00 bare and around 925.00coated 2" primaries and 3.5" collectors. This is a pic of first production one with the prototype. We will be test fitiing them later today or monday. Thanks Attached Images Last edited by Jokers69; 07-11-2010 at 03:23 PM.

12-18-2009, 05:17 PM	#149
70stroker Registered User Join Date: Jan 2007 Location: pittsburg kansas Posts: 894	Re: Header Solution absolutley interested. shoot some pics of them installed on monday, if they are above the frame rails you got atleast me sold on them. any chance of getting them with ball and socket type flanges? __________________ 70 GMC build: http://67-72chevytrucks.com/vboard/s...d.php?t=613130

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.