My First Dime - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Impalapawpaw · 03-25-2010, 01:35 PM

THANKS.Trying to make use of all the leaking wire wheels I have had in my life time..Also have one out side for the water hose .Its painted so it doent rust .

Sam59 · 03-26-2010, 08:00 PM

haha thats whats up, keep up the good work man

REDNOSE65 · 04-09-2010, 09:55 AM

Quote:

Originally Posted by Impalapawpaw

here is a few more
[IMG]

[/IMG]
[IMG]

[/IMG]

I've seen this wagon on Lay It Low

Impalapawpaw · 04-09-2010, 10:11 AM

Quote:

Originally Posted by REDNOSE65

I've seen this wagon on Lay It Low

Yep i sold it to a guy around here and he trades it to some one down in TX now that owens a Tattoo shop.That was the last i heard..I miss it but there will be others.

Impalapawpaw · 04-15-2010, 01:56 PM

Got my air gauges in
[IMG]

[/IMG]

Impalapawpaw · 04-15-2010, 01:58 PM

also time to put the tank in .hope to do that this weekend
[IMG]

[/IMG]

Impalapawpaw · 04-15-2010, 02:05 PM

[IMG]

[/IMG]

Impalapawpaw · 04-19-2010, 08:20 AM

GOT THE TANK DROPPED IN THIS WEEKEND FIT LIKE A GLOVE WITH A LITTLE TRIMMING.

[IMG]

[/IMG]

Impalapawpaw · 04-27-2010, 01:55 PM

GOT THE REAR BACK UNDER IT

[IMG]

[/IMG]

Impalapawpaw · 04-27-2010, 01:56 PM

HERE IT IS AIR UP ALL THE WAY AROUND FOR THE FIRST TIME

[IMG]

[/IMG]

[IMG]

[/IMG]

Impalapawpaw · 04-27-2010, 01:58 PM

STARTED TO FIT THE FENDERS AND SUPORT ON SO I CAN SEE WERE I NEED TO CUT.[IMG]

[/IMG]

aggie91 · 04-29-2010, 01:24 PM

Quote:

Originally Posted by Impalapawpaw

also time to put the tank in .hope to do that this weekend
[IMG]

[/IMG]

Where did you get that tank from?

Your build is looking good. What panhard bar are you going to use with that PB rear kit?

Impalapawpaw · 04-29-2010, 03:02 PM

Quote:

Originally Posted by aggie91

Where did you get that tank from?

Your build is looking good. What panhard bar are you going to use with that PB rear kit?

Got the tank from ebay and the pb pan bar you see in the picks is the right bar but it doesnt go there it goes on the back side of the pass side trailing arm.I was going to try something and Nate from PB told me it was not a good idea.

**scotts62** · 04-29-2010, 06:10 PM

Good looking tank you have there

Bazooka · 04-30-2010, 01:40 PM

Looking forward to seeing a side shot with all the sheetmetal on. Looking great man

Impalapawpaw · 04-30-2010, 01:45 PM

Quote:

Originally Posted by scotts62

Good looking tank you have there

I know thanks to great guys on this form with answers to all my questions this thing is coming together nice ..I cant wait till i get the bed on mine ..

Impalapawpaw · 04-30-2010, 01:46 PM

Quote:

Originally Posted by Bazooka

Looking forward to seeing a side shot with all the sheetmetal on. Looking great man

Me too ..Have you road tested your yet.

Bazooka · 04-30-2010, 01:57 PM

Quote:

Originally Posted by Impalapawpaw

Me too ..Have you road tested your yet.

Not yet.. I havent worked on the truck since december except for test fitting the gauge panel and putting on my new steering wheel. I think were going to get started working on it again next week. Its not that far from being on the road..

fryer1979 · 05-01-2010, 09:40 PM

Just tuning in to watch the progress.

Very nice work so far, and those Impalas are beautiful.

Impalapawpaw · 05-05-2010, 08:30 AM

Sat the hood on to see how muck room i have to work with.

[IMG]

[/IMG]

Broke1 · 05-05-2010, 11:53 PM

it's looking good

Bazooka · 05-20-2010, 06:44 PM

You going to use the Porterbuilt hood hinges on this project?

Impalapawpaw · 05-21-2010, 06:13 AM

Quote:

Originally Posted by Bazooka

You going to use the Porterbuilt hood hinges on this project?

yep have them sitting on the work bench already to go .just havent had the time to put them on yet ,Hope this weekend i can get busy on the truck on make up for lost time.

**67cheby** · 05-21-2010, 03:20 PM

nice progress

**scotts62** · 05-21-2010, 06:15 PM

Will almost set the bumper on the ground, is that as low as the rear will go?

03-25-2010, 01:35 PM	#126
Impalapawpaw Registered User Join Date: Dec 2009 Location: Greensboro N.C. Posts: 195	Re: My First Dime THANKS.Trying to make use of all the leaking wire wheels I have had in my life time..Also have one out side for the water hose .Its painted so it doent rust .

03-26-2010, 08:00 PM	#127
Sam59 Flat Broke Join Date: Jan 2007 Location: Moore, Oklahoma Posts: 209	Re: My First Dime haha thats whats up, keep up the good work man

04-15-2010, 01:56 PM	#130
Impalapawpaw Registered User Join Date: Dec 2009 Location: Greensboro N.C. Posts: 195	Re: My First Dime Got my air gauges in [IMG][/IMG] Last edited by Impalapawpaw; 04-15-2010 at 01:56 PM.

04-15-2010, 01:58 PM	#131
Impalapawpaw Registered User Join Date: Dec 2009 Location: Greensboro N.C. Posts: 195	Re: My First Dime also time to put the tank in .hope to do that this weekend [IMG][/IMG]

04-15-2010, 02:05 PM	#132
Impalapawpaw Registered User Join Date: Dec 2009 Location: Greensboro N.C. Posts: 195	Re: My First Dime [IMG][/IMG]

04-19-2010, 08:20 AM	#133
Impalapawpaw Registered User Join Date: Dec 2009 Location: Greensboro N.C. Posts: 195	Re: My First Dime GOT THE TANK DROPPED IN THIS WEEKEND FIT LIKE A GLOVE WITH A LITTLE TRIMMING. [IMG][/IMG]

04-27-2010, 01:55 PM	#134
Impalapawpaw Registered User Join Date: Dec 2009 Location: Greensboro N.C. Posts: 195	Re: My First Dime GOT THE REAR BACK UNDER IT [IMG][/IMG]

04-27-2010, 01:56 PM	#135
Impalapawpaw Registered User Join Date: Dec 2009 Location: Greensboro N.C. Posts: 195	Re: My First Dime HERE IT IS AIR UP ALL THE WAY AROUND FOR THE FIRST TIME [IMG][/IMG] [IMG][/IMG]

04-27-2010, 01:58 PM	#136
Impalapawpaw Registered User Join Date: Dec 2009 Location: Greensboro N.C. Posts: 195	Re: My First Dime STARTED TO FIT THE FENDERS AND SUPORT ON SO I CAN SEE WERE I NEED TO CUT.[IMG][/IMG]

04-29-2010, 06:10 PM	#139
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: My First Dime Good looking tank you have there __________________ Scott 93 crew cab build Project 62

04-30-2010, 01:40 PM	#140
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: My First Dime Looking forward to seeing a side shot with all the sheetmetal on. Looking great man

05-01-2010, 09:40 PM	#144
fryer1979 Redneck Hillbilly Join Date: Jan 2010 Location: Backwoods Posts: 1,307	Re: My First Dime Just tuning in to watch the progress. Very nice work so far, and those Impalas are beautiful.

05-05-2010, 08:30 AM	#145
Impalapawpaw Registered User Join Date: Dec 2009 Location: Greensboro N.C. Posts: 195	Re: My First Dime Sat the hood on to see how muck room i have to work with. [IMG][/IMG]

05-05-2010, 11:53 PM	#146
Broke1 Registered User Join Date: Jan 2010 Location: Mineral Wells,Texas Posts: 125	Re: My First Dime it's looking good __________________ Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=383205 Last edited by Broke1; 05-05-2010 at 11:53 PM.

05-20-2010, 06:44 PM	#147
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: My First Dime You going to use the Porterbuilt hood hinges on this project?



Register or Log In To remove these advertisements.

05-21-2010, 03:20 PM	#149
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: My First Dime nice progress __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-21-2010, 06:15 PM	#150
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: My First Dime Will almost set the bumper on the ground, is that as low as the rear will go? __________________ Scott 93 crew cab build Project 62

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.