MN Parting 64 C10 Custom - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bobbylast · 08-26-2011, 01:52 PM

Quote:

Originally Posted by tkeduk8r

bobbylast... I do not the the OE radio out of this truck, but I do have one in my parts supply... if you get me your email addy I can get pics for you....

Thnaks guys..
--Mike

pm sent

T2vigil · 08-26-2011, 07:41 PM

I am interested in a two speed wiper motor with the washer. Let me know what it would be shipped to 37332. Terry

**tkeduk8r** · 08-29-2011, 02:49 PM

Hey guys...
Smiley I can get you the hood latch, but I have no safe way to get under the truck to get your ebrake parts yet...I will get them, just waiting on my tractor loader to get out of the shop...

66... dash panel is cut for an oversize radio, doubt you would still want it...

T2... Ill look... I think I have a spare motor w/washer.... Ill look and repost...

--Mike

chop_shop · 08-30-2011, 12:44 PM

I need a good wiper transmission and arms.

SMILEYCA · 08-31-2011, 05:43 PM

ok thanks for the date. btw its the left hood hinge that i need not the latch.
thanks mike

LiLDrumKing3 · 09-02-2011, 12:01 AM

Do you possibly have the right side door handle spring?

**tkeduk8r** · 09-03-2011, 06:28 PM

old chev... cab trim has been sold

chop shop... I can get them for you... hows $50 shipped sound????

T2.. I DID find one extra for you hows $45 shipped sound????

Lemme know and I can pull them fo ryou...

--Mike

*sinnersahuayo* · 09-06-2011, 06:12 PM

do you have the gauge how much and my area code 98366

Caudillo64 · 09-11-2011, 05:12 PM

I need E brake cable setup from connector of handle cable to clips connectors of rear cables.

**tkeduk8r** · 09-12-2011, 09:53 PM

shin... what gauge.. I do have a cluster here, but its not out of that particular truck... can get pictures if you want them...

Caudillo... Ebrake parts are spoken for right now you'd be second in line... I havent been able to get back to lift the truck safely to pull them since my tractor bucket is in "body shop" he** rigth now.... sent it in to get blasted and coated but seems to be delay after delay with them, but I need it done afffordably so Im kinda stuck.... anyway thats the deal....
--Mike

*sinnersahuayo* · 09-12-2011, 10:03 PM

i have a 65 c10 with gauge

truckN66 · 09-13-2011, 09:53 AM

Do you still have the 3-tree shift linkage rods and connectors? If so, I'd be interested.
thanks.

**tkeduk8r** · 09-16-2011, 11:23 PM

sinnersahuayo... I am having trouble understanding what you need... can you post pics of what you'd like or need????

Truckn66... Yes I do have the linkage/connectors.... PM sent...
--Mike

SRVBLUES64 · 09-18-2011, 07:07 PM

looking for a complete wiring harness

4dranch · 09-18-2011, 10:34 PM

Mike,
Do you still have the passenger door and fender if so what condtion are they in. also do you still have the radio?
Thanks, David

**tkeduk8r** · 09-18-2011, 11:22 PM

srvblues.... cab harness looks allthere... dont see any cut wires or burns.... but will take a while to pull... Hows 65 shipped sound???/ Pm me and we can work something out....

4dranch.... pass door is "OK".... little rust in corners, but not "too" bad.... pass fender is SHOT even my MN standards.... can take pics if you want... I have a rodaio, but it is MIA right now...

Column si SOLD!!!! but didnt get it pulled yet as the weather has been kinda bad... I should be able to get it out tomorrow...
FOr those of you wating for underneath parts I still dont have my tractor loader back from body shop he** yet....

--Mike

Bears63 · 09-19-2011, 08:52 AM

Got the engine home safe and sound. Thanks again for everything, especially for holding onto the engine for as long as you did until I could get it picked up. And for anyone who is looking for parts..... Mike is fantastic to deal with!!

**tkeduk8r** · 09-19-2011, 06:03 PM

glad to hear and thanks for the kind words!!!! Its always neat to meet board members and Mike and his dad were pretty cool to talk with too!!! Even if it was a little wet out

.... Thanks again...
--Mike

SRVBLUES64 · 09-20-2011, 08:15 PM

You and I had spoken about the wiring harness? do you still have it you said it may take time to pull it $65.00 do you use paypal? I can the money now Thanks Jeff in Indy

sandog711 · 10-02-2011, 01:46 PM

I need a price on a few big items how much for the hood, tailgate, passenger door, and passenger bed side
if any of these parts are still for sale I would need them shipped to 89706

**tkeduk8r** · 10-04-2011, 01:03 PM

Jeff... my paypal is tkeduk8r@aol.com but id really rather you wait till I get a better gauge on the condition.......

sanddog... the hood is nice but IMO you could find better doors out there in NV.... also the shippin on those parts would prolly kill the deal...

T2vigil · 10-07-2011, 04:31 PM

Mike,

Received the parts today. Everything is just as expected. Great shape and no damage. Very nice doing business with you. Thanks. Terry

**tkeduk8r** · 10-07-2011, 05:23 PM

your welcome... Thank you!!!!
--Mike

rbuckin111 · 10-09-2011, 10:53 AM

What about sunvisors? What kind of condition, price with shipping to 85205?

nate79885746 · 10-09-2011, 10:10 PM

you wouldn't happen to have the clutch pedal and linkage still?

08-26-2011, 07:41 PM	#127
T2vigil Registered User Join Date: Jan 2010 Location: Evensville, TN Posts: 236	Re: Parting 64 C10 Custom I am interested in a two speed wiper motor with the washer. Let me know what it would be shipped to 37332. Terry

08-29-2011, 02:49 PM	#128
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom Hey guys... Smiley I can get you the hood latch, but I have no safe way to get under the truck to get your ebrake parts yet...I will get them, just waiting on my tractor loader to get out of the shop... 66... dash panel is cut for an oversize radio, doubt you would still want it... T2... Ill look... I think I have a spare motor w/washer.... Ill look and repost... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

08-30-2011, 12:44 PM	#129
chop_shop Registered User Join Date: Aug 2011 Location: Bloomfield, Ky Posts: 37	Re: Parting 64 C10 Custom I need a good wiper transmission and arms.

08-31-2011, 05:43 PM	#130
SMILEYCA Registered User Join Date: Aug 2011 Location: WEST SACRAMENTO,CA Posts: 4	Re: Parting 64 C10 Custom ok thanks for the date. btw its the left hood hinge that i need not the latch. thanks mike

09-02-2011, 12:01 AM	#131
LiLDrumKing3 Registered User Join Date: Feb 2008 Location: Plano, Texas Posts: 81	Re: Parting 64 C10 Custom Do you possibly have the right side door handle spring? __________________ Jeremy 1965 Chevy c10 Short Stepside Check out my Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=410658

09-03-2011, 06:28 PM	#132
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom old chev... cab trim has been sold chop shop... I can get them for you... hows $50 shipped sound???? T2.. I DID find one extra for you hows $45 shipped sound???? Lemme know and I can pull them fo ryou... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

09-06-2011, 06:12 PM	#133
sinnersahuayo Account Suspended Join Date: May 2011 Location: Bremerton Posts: 93	Re: Parting 64 C10 Custom do you have the gauge how much and my area code 98366

09-11-2011, 05:12 PM	#134
Caudillo64 Registered User Join Date: Jul 2011 Location: Fresno, Ca Posts: 365	Re: Parting 64 C10 Custom I need E brake cable setup from connector of handle cable to clips connectors of rear cables.

09-12-2011, 09:53 PM	#135
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom shin... what gauge.. I do have a cluster here, but its not out of that particular truck... can get pictures if you want them... Caudillo... Ebrake parts are spoken for right now you'd be second in line... I havent been able to get back to lift the truck safely to pull them since my tractor bucket is in "body shop" he** rigth now.... sent it in to get blasted and coated but seems to be delay after delay with them, but I need it done afffordably so Im kinda stuck.... anyway thats the deal.... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

09-12-2011, 10:03 PM	#136
sinnersahuayo Account Suspended Join Date: May 2011 Location: Bremerton Posts: 93	Re: Parting 64 C10 Custom i have a 65 c10 with gauge

09-13-2011, 09:53 AM	#137
truckN66 Registered User Join Date: Feb 2008 Location: chicago, il Posts: 3	Re: Parting 64 C10 Custom Do you still have the 3-tree shift linkage rods and connectors? If so, I'd be interested. thanks.

09-16-2011, 11:23 PM	#138
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom sinnersahuayo... I am having trouble understanding what you need... can you post pics of what you'd like or need???? Truckn66... Yes I do have the linkage/connectors.... PM sent... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

09-18-2011, 07:07 PM	#139
SRVBLUES64 Registered User Join Date: Nov 2009 Location: Noblesville, Indiana Posts: 430	Re: Parting 64 C10 Custom looking for a complete wiring harness

09-18-2011, 10:34 PM	#140
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Parting 64 C10 Custom Mike, Do you still have the passenger door and fender if so what condtion are they in. also do you still have the radio? Thanks, David

09-18-2011, 11:22 PM	#141
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom srvblues.... cab harness looks allthere... dont see any cut wires or burns.... but will take a while to pull... Hows 65 shipped sound???/ Pm me and we can work something out.... 4dranch.... pass door is "OK".... little rust in corners, but not "too" bad.... pass fender is SHOT even my MN standards.... can take pics if you want... I have a rodaio, but it is MIA right now... Column si SOLD!!!! but didnt get it pulled yet as the weather has been kinda bad... I should be able to get it out tomorrow... FOr those of you wating for underneath parts I still dont have my tractor loader back from body shop he** yet.... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's



Register or Log In To remove these advertisements.

09-19-2011, 08:52 AM	#142
Bears63 ...just another truck junkie.. Join Date: May 2009 Location: Watertown, SD Posts: 698	Re: Parting 64 C10 Custom Got the engine home safe and sound. Thanks again for everything, especially for holding onto the engine for as long as you did until I could get it picked up. And for anyone who is looking for parts..... Mike is fantastic to deal with!! __________________ Mike "Bear" Shea

09-19-2011, 06:03 PM	#143
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom glad to hear and thanks for the kind words!!!! Its always neat to meet board members and Mike and his dad were pretty cool to talk with too!!! Even if it was a little wet out .... Thanks again... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

09-20-2011, 08:15 PM	#144
SRVBLUES64 Registered User Join Date: Nov 2009 Location: Noblesville, Indiana Posts: 430	Re: Parting 64 C10 Custom You and I had spoken about the wiring harness? do you still have it you said it may take time to pull it $65.00 do you use paypal? I can the money now Thanks Jeff in Indy

10-02-2011, 01:46 PM	#145
sandog711 Registered User Join Date: Aug 2011 Location: Carson City, NV Posts: 21	Re: Parting 64 C10 Custom I need a price on a few big items how much for the hood, tailgate, passenger door, and passenger bed side if any of these parts are still for sale I would need them shipped to 89706

10-04-2011, 01:03 PM	#146
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom Jeff... my paypal is tkeduk8r@aol.com but id really rather you wait till I get a better gauge on the condition....... sanddog... the hood is nice but IMO you could find better doors out there in NV.... also the shippin on those parts would prolly kill the deal... __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

10-07-2011, 04:31 PM	#147
T2vigil Registered User Join Date: Jan 2010 Location: Evensville, TN Posts: 236	Re: Parting 64 C10 Custom Mike, Received the parts today. Everything is just as expected. Great shape and no damage. Very nice doing business with you. Thanks. Terry

10-07-2011, 05:23 PM	#148
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom your welcome... Thank you!!!! --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

10-09-2011, 10:53 AM	#149
rbuckin111 Registered User Join Date: Mar 2011 Location: Mesa, AZ Posts: 46	Re: Parting 64 C10 Custom What about sunvisors? What kind of condition, price with shipping to 85205?

10-09-2011, 10:10 PM	#150
nate79885746 Registered User Join Date: Oct 2011 Location: fairfax vt Posts: 3	Re: Parting 64 C10 Custom you wouldn't happen to have the clutch pedal and linkage still?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.