SANFORD build thread - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**clemdaddy** · 06-20-2013, 09:02 AM

this is a very nice build... textbook approach with tons of skills. hanging on for the bodywork but with what you've shown, it should be no problem for ya...

looks really good.

jhrusk · 06-20-2013, 09:20 AM

Thanks a bunch guys, Everyone on here really has something to bring to the table. I follow along with almost every build and it really is cool to see the different ideas and skills that people use doing these things. I was hoping to make the Power Tour but it was'nt meant to be but I am to the point now that I am not going to cut corners and it will take however long it takes. Thanks for looking.

flips72 · 06-20-2013, 06:10 PM

headers look great, you have some serious skills. that's a lot of good looking parts you have there, what epoxy are you planning on using?

jhrusk · 06-21-2013, 07:50 AM

Thanks Flips I am using PPG dp50 epoxy.

jhrusk · 07-10-2013, 08:59 PM

got everything in epoxy,getting started on the door skins and bodywork.

Name: 7-10-13 2.jpg
Views: 1827
Size: 17.2 KB

Name: 7-10-13 3.jpg
Views: 1817
Size: 36.7 KB

Name: 7-10-13 4.jpg
Views: 1818
Size: 59.4 KB

[attach

Name: 7-10-13.jpg
Views: 1817
Size: 33.3 KB

]1131379[/attach]

jhrusk · 07-10-2013, 09:02 PM

i am pretty happy with these door skins, I have to get all the gaps set but it is coming along slowly. Thanks for looking Name: 7-10-13 6.jpg
Views: 1826
Size: 37.9 KB

Name: 7-10-13 6.jpg
Views: 1826
Size: 37.9 KB

Dinos63 · 07-12-2013, 10:34 AM

MAN YOU GOT SKILLS! nice work

Jeff La · 07-12-2013, 11:41 PM

I'll bet that will really quiet that truck down, great job.

jhrusk · 08-17-2013, 05:58 PM

Time for an update,had a lot of other things going on but I am still making progress. I have gotten the passenger side door skin on and curently getting all the door gaps set, I am also doing rough bodywork as I go so I can get primer on it while working each area. I know that is not typically how things are done but it helps me from getting overwhelmed and also I dont know when I may have other things to work on in between.Here are a few pics, Thanks. Name: 8-16-13.jpg
Views: 1728
Size: 37.9 KB

Name: 8-16-13.jpg
Views: 1728
Size: 37.9 KB

Name: 8-16-13 2.jpg
Views: 1722
Size: 31.6 KB

Name: 8-16-13 3.jpg
Views: 1721
Size: 26.9 KB

Name: 8-16-13 4.jpg
Views: 1737
Size: 35.2 KB

Name: 8-16-13 5.jpg
Views: 1712
Size: 25.8 KB

jhrusk · 08-17-2013, 06:04 PM

a few more. Name: 8-16-13 6.jpg
Views: 1697
Size: 32.4 KB

Name: 8-16-13 7.jpg
Views: 1718
Size: 26.9 KB

Name: 8-16-13 8.jpg
Views: 1720
Size: 37.0 KB

Name: 8-16-13 9.jpg
Views: 1722
Size: 35.7 KB

Name: 8-16-13 10.jpg
Views: 1734
Size: 34.6 KB

Modges'66 · 08-17-2013, 08:29 PM

Very, very nice!

Dinos63 · 08-19-2013, 12:02 AM

Quote:

Originally Posted by Modges'66

Very, very nice!

x2

nxtruck · 08-20-2013, 05:45 PM

All I can say is "WOW". Very nice work Jay!!!

flips72 · 08-23-2013, 09:28 PM

wow the door gaps are great, you do some killer work.

jhrusk · 08-24-2013, 08:20 PM

most rough bodywork and gaps on door. Name: 8-24-13.jpg
Views: 1663
Size: 32.1 KB

LostMy65 · 08-24-2013, 09:59 PM

Quote:

Originally Posted by jhrusk

this brings me to the current status,I am currently working on the front suspension and will post pics soon.Thanks for looking.Attachment 916254

Attachment 916255

Attachment 916256

I see your wheel opening looks good with those wheels.

I also got me a long fleetside bed I plan to cut down to a short.

**Captainfab** · 08-25-2013, 12:06 AM

I was doing some catching up on this awesome build tonight and I noticed you are running a 2bbl carb?

Jmorales3181 · 08-25-2013, 12:49 PM

Very clean work as usual!
Posted via Mobile Device

jhrusk · 08-25-2013, 07:12 PM

Capt I plan on starting out with the 2 brl to hopefully get good mileage hoever I do have a 600 edelbrock. I will put it on a chassis dyno once it is up and running to tune it for optimum fuel mileage and we will try both carbs to see which on has the best driveability and mileage.

theastronaut · 08-27-2013, 05:21 PM

Awesome build! Love the way you ran the rear brake line/flex hose, well thought out mod. The sheetmetal work looks great, door gaps are very even and tight! I'll be keeping up with progress, can't wait to see more!

jhrusk · 11-20-2013, 07:29 PM

Thought I would post an update, not a whole lot going on but I am about 80% complete on the passenger side door and fender fittment and well into it on the drivers side, It is very time consuming to get these door gaps and fittment like it should be. I have an extra frame that I am going to mount the body to and finish all the body work then I will start the painting process. Hopefully after the holidays I will be able to make a little more progress on it. Tha last pic is a project I started for a friend of mine a couple years ago, it has been sitting since the economy tanked but I think he is ready to get back on it when I get this truck finished. Thanks for looking. Name: 11-20-13.jpg
Views: 1477
Size: 24.3 KB

Name: 11-20-13.jpg
Views: 1477
Size: 24.3 KB

Name: 11-20-13 2.jpg
Views: 1470
Size: 29.2 KB

Name: 11-20-13 3.jpg
Views: 1459
Size: 28.4 KB

Name: 11-20-13 4.jpg
Views: 1459
Size: 32.3 KB

jhrusk · 12-09-2013, 06:37 PM

Another small update,been working on the driver door. Got the gaps close, just working toward paint one day. Name: 12-9-13.jpg
Views: 1437
Size: 27.9 KB

Name: 12-9-13 2.jpg
Views: 1420
Size: 21.9 KB

Name: 12-9-13 3.jpg
Views: 1418
Size: 30.5 KB

Name: 12-9-13 4.jpg
Views: 1425
Size: 24.4 KB

**clemdaddy** · 12-09-2013, 07:47 PM

very nice work. definitely inspiring detail in those gaps. ton of work...

bj383ss · 12-09-2013, 07:58 PM

Awesome build. Your body work skills are top notch. Do you mind me asking what tool you are using to go to bare metal? It looks like you get very good results with it.

Bret

jhrusk · 12-09-2013, 08:22 PM

Thanks guys for the kind words. bj I had the body sandblasted and then sprayed with epoxy primer, when I get ready to work an area I have a 90 degree die grinder with a 2" roloc 36 grit disc. Body work on this truck has really worn me down as it is so time consuming but I just keep working a little along and maybe one day it will be finished. Thanks Guys.

06-20-2013, 09:02 AM	#126
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: SANFORD build thread this is a very nice build... textbook approach with tons of skills. hanging on for the bodywork but with what you've shown, it should be no problem for ya... looks really good.

06-20-2013, 09:20 AM	#127
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 553	Re: SANFORD build thread Thanks a bunch guys, Everyone on here really has something to bring to the table. I follow along with almost every build and it really is cool to see the different ideas and skills that people use doing these things. I was hoping to make the Power Tour but it was'nt meant to be but I am to the point now that I am not going to cut corners and it will take however long it takes. Thanks for looking. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

06-20-2013, 06:10 PM	#128
flips72 Registered User Join Date: Jan 2008 Location: oldfort tn Posts: 1,183	Re: SANFORD build thread headers look great, you have some serious skills. that's a lot of good looking parts you have there, what epoxy are you planning on using? __________________ my 65 fleetside build http://67-72chevytrucks.com/vboard/s...d.php?t=442370 big back glass conversion http://67-72chevytrucks.com/vboard/s...dow+conversion

06-21-2013, 07:50 AM	#129
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 553	Re: SANFORD build thread Thanks Flips I am using PPG dp50 epoxy. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

07-10-2013, 08:59 PM	#130
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 553	Re: SANFORD build thread got everything in epoxy,getting started on the door skins and bodywork. [attach]1131379[/attach] Attached Images __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

07-10-2013, 09:02 PM	#131
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 553	Re: SANFORD build thread i am pretty happy with these door skins, I have to get all the gaps set but it is coming along slowly. Thanks for looking __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

07-12-2013, 10:34 AM	#132
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: SANFORD build thread MAN YOU GOT SKILLS! nice work __________________ CHEVY ONLY... Nothin Else !

07-12-2013, 11:41 PM	#133
Jeff La Registered User Join Date: Dec 2011 Location: Donaldsonville, La. Posts: 1,024	Re: SANFORD build thread I'll bet that will really quiet that truck down, great job.

08-17-2013, 05:58 PM	#134
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 553	Re: SANFORD build thread Time for an update,had a lot of other things going on but I am still making progress. I have gotten the passenger side door skin on and curently getting all the door gaps set, I am also doing rough bodywork as I go so I can get primer on it while working each area. I know that is not typically how things are done but it helps me from getting overwhelmed and also I dont know when I may have other things to work on in between.Here are a few pics, Thanks. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

08-17-2013, 06:04 PM	#135
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 553	Re: SANFORD build thread a few more. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

08-17-2013, 08:29 PM	#136
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: SANFORD build thread Very, very nice! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

08-20-2013, 05:45 PM	#138
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: SANFORD build thread All I can say is "WOW". Very nice work Jay!!! __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

08-23-2013, 09:28 PM	#139
flips72 Registered User Join Date: Jan 2008 Location: oldfort tn Posts: 1,183	Re: SANFORD build thread wow the door gaps are great, you do some killer work. __________________ my 65 fleetside build http://67-72chevytrucks.com/vboard/s...d.php?t=442370 big back glass conversion http://67-72chevytrucks.com/vboard/s...dow+conversion

08-24-2013, 08:20 PM	#140
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 553	Re: SANFORD build thread most rough bodywork and gaps on door. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

08-25-2013, 12:06 AM	#142
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: SANFORD build thread I was doing some catching up on this awesome build tonight and I noticed you are running a 2bbl carb? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

08-25-2013, 12:49 PM	#143
Jmorales3181 Registered User Join Date: Aug 2012 Location: Smithfield rhode island Posts: 722	Re: SANFORD build thread Very clean work as usual! Posted via Mobile Device __________________ My frame Layin 63 short bed project http://67-72chevytrucks.com/vboard/s...d.php?t=551353

08-25-2013, 07:12 PM	#144
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 553	Re: SANFORD build thread Capt I plan on starting out with the 2 brl to hopefully get good mileage hoever I do have a 600 edelbrock. I will put it on a chassis dyno once it is up and running to tune it for optimum fuel mileage and we will try both carbs to see which on has the best driveability and mileage. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

08-27-2013, 05:21 PM	#145
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: SANFORD build thread Awesome build! Love the way you ran the rear brake line/flex hose, well thought out mod. The sheetmetal work looks great, door gaps are very even and tight! I'll be keeping up with progress, can't wait to see more! __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

11-20-2013, 07:29 PM	#146
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 553	Re: SANFORD build thread Thought I would post an update, not a whole lot going on but I am about 80% complete on the passenger side door and fender fittment and well into it on the drivers side, It is very time consuming to get these door gaps and fittment like it should be. I have an extra frame that I am going to mount the body to and finish all the body work then I will start the painting process. Hopefully after the holidays I will be able to make a little more progress on it. Tha last pic is a project I started for a friend of mine a couple years ago, it has been sitting since the economy tanked but I think he is ready to get back on it when I get this truck finished. Thanks for looking. Attached Images __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

12-09-2013, 06:37 PM	#147
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 553	Re: SANFORD build thread Another small update,been working on the driver door. Got the gaps close, just working toward paint one day. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

12-09-2013, 07:47 PM	#148
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: SANFORD build thread very nice work. definitely inspiring detail in those gaps. ton of work...

12-09-2013, 07:58 PM	#149
bj383ss Registered User Join Date: Sep 2012 Location: Leander, TX Posts: 969	Re: SANFORD build thread Awesome build. Your body work skills are top notch. Do you mind me asking what tool you are using to go to bare metal? It looks like you get very good results with it. Bret __________________ 64' Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=586955

12-09-2013, 08:22 PM	#150
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 553	Re: SANFORD build thread Thanks guys for the kind words. bj I had the body sandblasted and then sprayed with epoxy primer, when I get ready to work an area I have a 90 degree die grinder with a 2" roloc 36 grit disc. Body work on this truck has really worn me down as it is so time consuming but I just keep working a little along and maybe one day it will be finished. Thanks Guys. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.