Project Coca-Rustola: '67 C20 Longstepper - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Saclandman · 02-14-2015, 10:40 PM

Quote:

Originally Posted by Ol Blue K20

Is it in yet.....lol

Damn, you sound like my wife.

jimbosprint · 02-15-2015, 09:15 AM

Saclandman · 02-21-2015, 10:05 PM

I think I'm ready to drop in the motor. Everything is buttoned up and ready. Touched up the paint, installed the heater hose fittings, cleaned up the routing of the wires, and bolted on the clutch. Wonder if it would fit in the back of my Tahoe...

Saclandman · 02-21-2015, 10:11 PM

Also put in a new temp sensor and spark plugs-gapped to the HEI friendly 0.045.

Saclandman · 02-22-2015, 05:52 PM

It's in!

**Ol Blue K20** · 02-22-2015, 06:38 PM

Cool, looking good

Saclandman · 02-22-2015, 08:16 PM

Still got a couple of inches to go. Hard time getting the shaft to align through the clutch. Can't quite get the angle to the dangle.

jimbosprint · 02-22-2015, 10:45 PM

Nice job. You'll have it on the road again in no time.

Saclandman · 02-22-2015, 11:00 PM

Soon, I'll have this truck motorin' down the road. But probably not in the next two weeks because work and a Vegas trip next weekend.

I learned today that moving a cherry picker around on a gravel surface sucks. If I ever do this again, it will be in my own damn garage.

swamp rat · 02-23-2015, 01:15 AM

If your garage has a tall enough ceiling... Driveway works.

Did you get the input shaft to align yet? There is an alignment shaft you can rent from the auto parts stores when installong the cluthc and pressure plate, don't know if you used one or not. Sometimes the input splines are just needing to be rotated a smidge by wiggling the tranny and it drops home.

Anyway nice progress!

Saclandman · 02-23-2015, 10:54 AM

Yep, the clutch kit I bought came with an alignment tool. I know I'm close. Just need the right wiggle to get it home, but ran out of time yesterday.

no1udknow · 02-23-2015, 02:41 PM

Quote:

Originally Posted by Saclandman

It's in!

and now you sound like my wife

no1udknow · 02-23-2015, 02:43 PM

Quote:

Originally Posted by Saclandman

Still got a couple of inches to go. Hard time getting the shaft to align ....... Can't quite get the angle to the dangle.

Funny she says that too

sduckworth13 · 02-23-2015, 02:57 PM

Quote:

Originally Posted by Saclandman

Yep, the clutch kit I bought came with an alignment tool. I know I'm close. Just need the right wiggle to get it home, but ran out of time yesterday.

Rich, I used starter bolts to pull the transmission in.

Saclandman · 02-23-2015, 03:29 PM

Quote:

Originally Posted by no1udknow

Funny she says that too

Beat me to the punch line.

Saclandman · 02-23-2015, 03:30 PM

Quote:

Originally Posted by sduckworth13

Rich, I used starter bolts to pull the transmission in.

I'll try that. Thanks.

no1udknow · 02-23-2015, 11:29 PM

Quote:

Originally Posted by Saclandman

I'll try that. Thanks.

you need to be really careful doing that, if you damage the splines on the input shaft, the clutch will not slide freely, then your pulling it back apart and replacing parts.

keh27 · 02-24-2015, 12:20 AM

Looking great ,I do love this truck

Saclandman · 02-24-2015, 12:40 AM

Quote:

Originally Posted by keh27

Looking great ,I do love this truck

Thanks. I'm sitting here fantasizing about it rumbling down the road with new dual exhaust and new wheels and tires.

Saclandman · 03-07-2015, 10:55 PM

Got the engine and tranny fully mated together today. Also put the starter and exhaust manifolds on And got the bell crank re-attached to the block. Just got to get the carb on, run the HEI power wire, clean the gas tank, reinstall the radiator, bolt up the exhaust, and...

LIGHT THE FIRES, BABY! VROOOMMM!

Saclandman · 03-12-2015, 06:06 PM

Made some progress today while playing hookie from work( shhh, don't tell anyone). Wrapping up the engine compartment and installing a new gas tank. Had a lot more gas in the old tank than I thought. Made it tough to get the tank out of there.

Saclandman · 03-12-2015, 09:54 PM

Got the truck insured and ready to register with the DMV. Thanks to Hagerty. Surprisingly low annual premium. Very happy.

swamp rat · 03-13-2015, 05:03 AM

Almost a daily driver now huh??!!

Saclandman · 03-13-2015, 09:42 AM

Quote:

Originally Posted by swamp rat

Almost a daily driver now huh??!!

If it was legal in the State of California to throw the kids in the bed and take them to school, I'd do it. And if my wife would let me.

Saclandman · 03-22-2015, 09:36 PM

Almost ready to fire it up. Ran my new HEI power wire from the firewall block, routed my new front light harness, and bolted up the exhaust. Just a few more things to do:
Make up new throttle linkage;
Install new voltage regulator;
Install new choke cable;
Fill the fluids; and,
Put some fresh gas in the new tank.

Once its running, off to the shop for some new wheels and tires, and new dual exhaust.

02-15-2015, 09:15 AM	#127
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	Re: Project Coca-Rustola: '67 C20 Longstepper __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold)

02-21-2015, 10:05 PM	#128
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper I think I'm ready to drop in the motor. Everything is buttoned up and ready. Touched up the paint, installed the heater hose fittings, cleaned up the routing of the wires, and bolted on the clutch. Wonder if it would fit in the back of my Tahoe... Attached Images __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

02-21-2015, 10:11 PM	#129
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Also put in a new temp sensor and spark plugs-gapped to the HEI friendly 0.045. __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

02-22-2015, 05:52 PM	#130
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper It's in! Attached Images __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

02-22-2015, 06:38 PM	#131
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Project Coca-Rustola: '67 C20 Longstepper Cool, looking good __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

02-22-2015, 08:16 PM	#132
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Still got a couple of inches to go. Hard time getting the shaft to align through the clutch. Can't quite get the angle to the dangle. __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

02-22-2015, 10:45 PM	#133
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	Re: Project Coca-Rustola: '67 C20 Longstepper Nice job. You'll have it on the road again in no time. __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold)

02-22-2015, 11:00 PM	#134
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Soon, I'll have this truck motorin' down the road. But probably not in the next two weeks because work and a Vegas trip next weekend. I learned today that moving a cherry picker around on a gravel surface sucks. If I ever do this again, it will be in my own damn garage. __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

02-23-2015, 01:15 AM	#135
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Project Coca-Rustola: '67 C20 Longstepper If your garage has a tall enough ceiling... Driveway works. Did you get the input shaft to align yet? There is an alignment shaft you can rent from the auto parts stores when installong the cluthc and pressure plate, don't know if you used one or not. Sometimes the input splines are just needing to be rotated a smidge by wiggling the tranny and it drops home. Anyway nice progress! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

02-23-2015, 10:54 AM	#136
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Yep, the clutch kit I bought came with an alignment tool. I know I'm close. Just need the right wiggle to get it home, but ran out of time yesterday. __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

02-24-2015, 12:20 AM	#143
keh27 Registered User Join Date: Jul 2012 Location: franklin.tn Posts: 600	Re: Project Coca-Rustola: '67 C20 Longstepper Looking great ,I do love this truck __________________ 69 step side http://67-72chevytrucks.com/vboard/s...d.php?t=613407

03-07-2015, 10:55 PM	#145
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Got the engine and tranny fully mated together today. Also put the starter and exhaust manifolds on And got the bell crank re-attached to the block. Just got to get the carb on, run the HEI power wire, clean the gas tank, reinstall the radiator, bolt up the exhaust, and... LIGHT THE FIRES, BABY! VROOOMMM! __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

03-12-2015, 06:06 PM	#146
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Made some progress today while playing hookie from work( shhh, don't tell anyone). Wrapping up the engine compartment and installing a new gas tank. Had a lot more gas in the old tank than I thought. Made it tough to get the tank out of there. Attached Images __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

03-12-2015, 09:54 PM	#147
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Got the truck insured and ready to register with the DMV. Thanks to Hagerty. Surprisingly low annual premium. Very happy. __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

03-13-2015, 05:03 AM	#148
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Project Coca-Rustola: '67 C20 Longstepper Almost a daily driver now huh??!! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's



Register or Log In To remove these advertisements.

03-22-2015, 09:36 PM	#150
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Project Coca-Rustola: '67 C20 Longstepper Almost ready to fire it up. Ran my new HEI power wire from the firewall block, routed my new front light harness, and bolted up the exhaust. Just a few more things to do: Make up new throttle linkage; Install new voltage regulator; Install new choke cable; Fill the fluids; and, Put some fresh gas in the new tank. Once its running, off to the shop for some new wheels and tires, and new dual exhaust. __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.