NC Parting out a 62 c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jcramsey · 06-22-2013, 02:24 PM

This is my brother's truck, located in Marion, NC. He bought it to get the motor and transmission, so everything else is up for grabs. Slight cab and bed damage from being used to break the fall of a rather large tree.

If you want something, just let me know. PM me and I can give you his contact info.

Rear bumper sold
Front bumper sold
Dash sold
Driver door glass sold
Passenger vent window glass sold
Wiper arms sold
Heater contols sold
Rearview mirror sold
Window cranks sold
Rear bumper brackets sold
West Coast mirrors sold
Torsion bar bolt (1) sold
Heater delete plates sold
Torsion keys sold

Still have these good parts: wiper and side cowl pieces, grill, seat, gas tank, heater, other small bits...just ask

**dtkarst** · 06-22-2013, 02:59 PM

Hell it will buff out!

jcramsey · 06-22-2013, 05:38 PM

Quote:

Originally Posted by dtkarst

Hell it will buff out!

That's what I tried it tell him

Reminds me of the Andy Griffith show and Barney's new car...

Barney:
"Here's one for a fixer-upper.
1949 Hudson terraplane.
Was fallen on last saturday by a 30-ton semi-trailer.
Lots of miles left in the rubber."
Posted via Mobile Device

jcramsey · 06-24-2013, 08:54 AM

Here are some pics. Hood is rough around the corners with rust, not sure if its worth it to anyone. Cowl and cowl corners look good. Interior pieces are pretty good as well with what appears to be a factory cut hole for a clock? My brother said someone had put an oil gauge in its place, but the hole looks too clean clean not to be factory.

jcramsey · 06-24-2013, 08:55 AM

A few more pics.

jcramsey · 06-24-2013, 08:58 AM

Last of what he sent me.

LostMy65 · 06-22-2013, 04:22 PM

I hope the tree is okay.
Posted via Mobile Device

**argonaut** · 06-25-2013, 11:00 AM

I'm looking for a clutch pedal and actuator arm. The teeth on mine are stripped. Please let me know if you have one. Would appreciate pics and what you'd ask shipped to 90815. Thanks!
Posted via Mobile Device

jcramsey · 06-25-2013, 12:09 PM

Quote:

Originally Posted by argonaut

I'm looking for a clutch pedal and actuator arm. The teeth on mine are stripped. Please let me know if you have one. Would appreciate pics and what you'd ask shipped to 90815. Thanks!
Posted via Mobile Device

I'll get my bro to get some pics for you ASAP.

jcramsey · 06-26-2013, 08:54 AM

Quote:

Originally Posted by argonaut

I'm looking for a clutch pedal and actuator arm. The teeth on mine are stripped. Please let me know if you have one. Would appreciate pics and what you'd ask shipped to 90815. Thanks!
Posted via Mobile Device

Pics for you. Teeth are in good shape.

Email/call my bro to discuss price with him.

vinco · 06-25-2013, 11:54 PM

Any update on the gauge cluster?

62-One-Ton · 06-26-2013, 01:16 AM

Complete steering column including wheel to 95672? Maybe a couple more pics of it.
Posted via Mobile Device

62-One-Ton · 06-26-2013, 01:19 AM

Just looked closer was that column a shifter column (auto or manual)? If so does anyone know how hard it is to remove or plug up the hole?
Posted via Mobile Device

jcramsey · 06-26-2013, 09:10 AM

Quote:

Originally Posted by 62-One-Ton

Just looked closer was that column a shifter column (auto or manual)? If so does anyone know how hard it is to remove or plug up the hole?
Posted via Mobile Device

It was a column shift at one time I think. Just talked to my brother and he might end up using the column on another project so it might be on the hold list for now.

62-One-Ton · 06-26-2013, 10:17 AM

Ok thanks.
Posted via Mobile Device

Blue Blood · 06-27-2013, 05:26 PM

If your brother or the poster above me passes, I need the sleeve that picks up the shoulder/bolt to attach the bottom of the column to the steering box shaft...maybe called a steering coupler ?
The shop lost mine!
Going to 01821
Thanks!

jcramsey · 06-27-2013, 06:07 PM

Quote:

Originally Posted by Blue Blood

If your brother or the poster above me passes, I need the sleeve that picks up the shoulder/bolt to attach the bottom of the column to the steering box shaft...maybe called a steering coupler ?
The shop lost mine!
Going to 01821
Thanks!

Will put you in line if my bro don't use it!

Does anyone know for sure if the interior parts for a 62 are interchangeable with a 63? I'm thinking yes, but want to confirm it.

Blue Blood · 06-27-2013, 06:22 PM

Quote:

Originally Posted by jcramsey

Will put you in line if my bro don't use it!

Does anyone know for sure if the interior parts for a 62 are interchangeable with a 63? I'm thinking yes, but want to confirm it.

Thanks!
I think most would interchange, although I believe some underdash stuff might differ
Posted via Mobile Device

jcramsey · 06-27-2013, 07:11 PM

Quote:

Originally Posted by Blue Blood

Thanks!
I think most would interchange, although I believe some underdash stuff might differ
Posted via Mobile Device

Thanks Blue Blood. Specifically looking at the gauges, heater controls and ash tray. I think that stuff is the same from all the pics I've seen.
Posted via Mobile Device

63Ton · 07-04-2013, 05:00 PM

How much for all the switches under the gauge cluster, ign sw, sig liter, wiper sw and what ever the other two are.

Thanks

jcramsey · 07-05-2013, 07:42 AM

Quote:

Originally Posted by 63Ton

How much for all the switches under the gauge cluster, ign sw, sig liter, wiper sw and what ever the other two are.

Thanks

PM sent

62 Barnfind · 07-05-2013, 08:49 AM

I interested in the front bumper and frame horns. My front ones are bent and missing. How much for both? Zip 76542

jcramsey · 07-05-2013, 09:02 AM

Quote:

Originally Posted by 62 Barnfind

I interested in the front bumper and frame horns. My front ones are bent and missing. How much for both? Zip 76542

I'll PM you my brothers info and he can let you know!

**bhc41051** · 07-06-2013, 12:20 AM

I'm interested in the heater control,, PM sent

jcramsey · 07-06-2013, 01:05 PM

Quote:

Originally Posted by bhc41051

I'm interested in the heater control,, PM sent

Judt talked to my brother. Someone else got the heater controls.
Posted via Mobile Device

06-22-2013, 02:24 PM	#1
jcramsey Registered User Join Date: Jun 2011 Location: Marion, NC Posts: 851	Parting out a 62 c10 This is my brother's truck, located in Marion, NC. He bought it to get the motor and transmission, so everything else is up for grabs. Slight cab and bed damage from being used to break the fall of a rather large tree. If you want something, just let me know. PM me and I can give you his contact info. Rear bumper sold Front bumper sold Dash sold Driver door glass sold Passenger vent window glass sold Wiper arms sold Heater contols sold Rearview mirror sold Window cranks sold Rear bumper brackets sold West Coast mirrors sold Torsion bar bolt (1) sold Heater delete plates sold Torsion keys sold Still have these good parts: wiper and side cowl pieces, grill, seat, gas tank, heater, other small bits...just ask Attached Images __________________ The Egg Hauler The Government Mule Last edited by jcramsey; 10-07-2013 at 08:31 AM.

06-22-2013, 02:59 PM	#2
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,490	Re: Parting out a 62 c10 Hell it will buff out!

06-24-2013, 08:54 AM	#4
jcramsey Registered User Join Date: Jun 2011 Location: Marion, NC Posts: 851	Re: Parting out a 62 c10 Here are some pics. Hood is rough around the corners with rust, not sure if its worth it to anyone. Cowl and cowl corners look good. Interior pieces are pretty good as well with what appears to be a factory cut hole for a clock? My brother said someone had put an oil gauge in its place, but the hole looks too clean clean not to be factory. Attached Images __________________ The Egg Hauler The Government Mule

06-24-2013, 08:55 AM	#5
jcramsey Registered User Join Date: Jun 2011 Location: Marion, NC Posts: 851	Re: Parting out a 62 c10 A few more pics. Attached Images __________________ The Egg Hauler The Government Mule

06-24-2013, 08:58 AM	#6
jcramsey Registered User Join Date: Jun 2011 Location: Marion, NC Posts: 851	Re: Parting out a 62 c10 Last of what he sent me. Attached Images __________________ The Egg Hauler The Government Mule

06-22-2013, 04:22 PM	#7
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Parting out a 62 c10 I hope the tree is okay. Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

06-25-2013, 11:00 AM	#8
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Parting out a 62 c10 I'm looking for a clutch pedal and actuator arm. The teeth on mine are stripped. Please let me know if you have one. Would appreciate pics and what you'd ask shipped to 90815. Thanks! Posted via Mobile Device __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

06-25-2013, 11:54 PM	#11
vinco Registered User Join Date: Jun 2013 Location: Hot Springs, Arkansas Posts: 17	Re: Parting out a 62 c10 Any update on the gauge cluster?

06-26-2013, 01:16 AM	#12
62-One-Ton Registered User Join Date: Feb 2012 Location: Rescue, CA Posts: 255	Re: Parting out a 62 c10 Complete steering column including wheel to 95672? Maybe a couple more pics of it. Posted via Mobile Device __________________ Project Change of Plans: http://67-72chevytrucks.com/vboard/s...d.php?t=513135 '62 C10 SWB '03 Express Van 5.3l Dead (parting out and using motor) '99 Silverado 4.8l 5 speed 4wd

06-26-2013, 01:19 AM	#13
62-One-Ton Registered User Join Date: Feb 2012 Location: Rescue, CA Posts: 255	Re: Parting out a 62 c10 Just looked closer was that column a shifter column (auto or manual)? If so does anyone know how hard it is to remove or plug up the hole? Posted via Mobile Device __________________ Project Change of Plans: http://67-72chevytrucks.com/vboard/s...d.php?t=513135 '62 C10 SWB '03 Express Van 5.3l Dead (parting out and using motor) '99 Silverado 4.8l 5 speed 4wd

06-26-2013, 10:17 AM	#15
62-One-Ton Registered User Join Date: Feb 2012 Location: Rescue, CA Posts: 255	Re: Parting out a 62 c10 Ok thanks. Posted via Mobile Device __________________ Project Change of Plans: http://67-72chevytrucks.com/vboard/s...d.php?t=513135 '62 C10 SWB '03 Express Van 5.3l Dead (parting out and using motor) '99 Silverado 4.8l 5 speed 4wd

06-27-2013, 05:26 PM	#16
Blue Blood Registered User Join Date: Apr 2011 Location: MV Ma. Posts: 114	Re: Parting out a 62 c10 If your brother or the poster above me passes, I need the sleeve that picks up the shoulder/bolt to attach the bottom of the column to the steering box shaft...maybe called a steering coupler ? The shop lost mine! Going to 01821 Thanks!

07-04-2013, 05:00 PM	#20
63Ton Registered User Join Date: May 2013 Location: Hdg, Maryland Posts: 29	Re: Parting out a 62 c10 How much for all the switches under the gauge cluster, ign sw, sig liter, wiper sw and what ever the other two are. Thanks

07-05-2013, 08:49 AM	#22
62 Barnfind Registered User Join Date: Jan 2012 Location: Killeen, Tx Posts: 1,373	Re: Parting out a 62 c10 I interested in the front bumper and frame horns. My front ones are bent and missing. How much for both? Zip 76542 __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513

07-06-2013, 12:20 AM	#24
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 788	Re: Parting out a 62 c10 I'm interested in the heater control,, PM sent



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.