1953 Burb build - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Iceburgh · 11-23-2014, 09:55 PM

ready for paint....start next week. hope to have it back together by xmas

**youngrodder** · 11-23-2014, 10:39 PM

Looks really good. The gaps look nice and tight. I like how the running boards tie into the front fenders. Are they aftermarket or did you make them?

Good luck with paint.

Marc

**oldman3** · 11-24-2014, 12:25 AM

Looks great, hope the paint comes out super...Jim

Iceburgh · 11-24-2014, 12:48 PM

Quote:

Originally Posted by youngrodder

Looks really good. The gaps look nice and tight. I like how the running boards tie into the front fenders. Are they aftermarket or did you make them?

Good luck with paint.

Marc

Thanks... We made them and the roll pan.
Tons of hours in just these three pieces.
Same boards I have on my truck so I kept the pattern. 1/16 gap that will pull together when bolted

**youngrodder** · 11-24-2014, 01:34 PM

Quote:

Originally Posted by Iceburgh

Thanks... We made them and the roll pan.
Tons of hours in just these three pieces.
Same boards I have on my truck so I kept the pattern. 1/16 gap that will pull together when bolted

Yes, I knew you built the roll pan as we talked about that before. 1/16" gap you say.... that is what you get with aftermarket running boards.....ha ha. Just kidding of course. I didn't notice the running boards on your truck. I don't remember seeing that many close of pics of it.

Nice work.
Marc

**oldman3** · 12-21-2014, 02:48 PM

What's the latest on the paint, any pics or???...Jim

Iceburgh · 12-21-2014, 03:08 PM

Paint booth is full for another week or so I would guess. I was down on Friday my buddy is finishing another job then we are going to get started on mine.
I am off the next two weeks so hope to get it down and get a good amount of work done.
I did start on the interior panels while waiting

**oldman3** · 12-21-2014, 06:24 PM

Bummer on waiting to paint, I see the tape across the dash, is it going to be two-tone??...Jim

**Advanced Design** · 12-21-2014, 08:08 PM

Nice Iceburgh...looking forward to seeing the color(s)!

Iceburgh · 12-21-2014, 08:40 PM

Quote:

Originally Posted by oldman3

Bummer on waiting to paint, I see the tape across the dash, is it going to be two-tone??...Jim

That is the plans silver/white

Iceburgh · 12-21-2014, 08:42 PM

Quote:

Originally Posted by Advanced Design

Nice Iceburgh...looking forward to seeing the color(s)!

Black and red...wood floor tinted grey, grey seats red carpet

Hardest part is the headliner. Got the rear on e in and molded with a little heat. Next is the front. Middle should be easy.
Once up plan on gluing the material in place.

ABS is forgiving but all the contours are a *****

**youngrodder** · 12-21-2014, 11:47 PM

Looking good. Where did you get your ABS panels? I've never worked with the stuff. I did all of the interior in my 48. I really enjoyed the process.

Good luck over Christmas getting some work in..

Marc

Iceburgh · 12-22-2014, 09:50 PM

Totalplastics.com. They have a few places in Mi. Cheaper to pick up.

**youngrodder** · 12-22-2014, 11:26 PM

Quote:

Originally Posted by Iceburgh

Totalplastics.com. They have a few places in Mi. Cheaper to pick up.

Good to know...

Thanks
Marc

RCbowtie69 · 12-26-2014, 06:54 PM

Nice!!!!! Keep on Truckin''

Iceburgh · 01-12-2015, 09:15 PM

Out of the garage and down the road ( on the coldest day of the year)

some more interior done before it left

**Advanced Design** · 01-12-2015, 09:44 PM

Looking good Iceburgh...where did you get the door panel?

Iceburgh · 01-12-2015, 10:19 PM

Got them from Rod doors. Same as what Zi have in my truck.
The guy who bought roddoors I have been told does it part time and deals through classic chevy and chevy of the 40's. I am not sure if that is the case I have had mine for a while just sitting around

**youngrodder** · 01-13-2015, 12:15 PM

The progress looks good Iceburgh. Yes. the weather in MI is very cold at the moment as well...

Keep it up

Marc

Iceburgh · 02-08-2015, 12:43 AM

Well my buddy got his new paint booth up and running after moving to the new shop.
1st car is done.

Mine rolls in next.
We played with the door gaps while waiting. Cut and re-welded the inside where the hinges go and also cut the pillar and pushed the top of the door in.
Gaps are perfect now. Final primer and wet sand Mon. Maybe Thur paint but with the numerous layers and colors it will take about 8-10 days before the clear and buff.

Iceburgh · 02-08-2015, 12:48 AM

a little more of the interior covered as well

**oldman3** · 02-08-2015, 01:22 AM

Looking good, I know you'll be happy to see it in paint....Jim

Iceburgh · 02-08-2015, 01:54 AM

**Advanced Design** · 02-08-2015, 08:48 AM

Nice work on the door gaps. They look good. Looking forward to seeing it in color.

**youngrodder** · 02-08-2015, 11:20 PM

looking good.

Marc

11-23-2014, 09:55 PM	#126
Iceburgh Registered User Join Date: Jan 2014 Location: New Bloomfield pa. Posts: 644	Re: 1953 Burb build ready for paint....start next week. hope to have it back together by xmas __________________ 1953 suburban build http://67-72chevytrucks.com/vboard/s...d.php?t=621331

11-23-2014, 10:39 PM	#127
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,774	Re: 1953 Burb build Looks really good. The gaps look nice and tight. I like how the running boards tie into the front fenders. Are they aftermarket or did you make them? Good luck with paint. Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

11-24-2014, 12:25 AM	#128
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: 1953 Burb build Looks great, hope the paint comes out super...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

12-21-2014, 02:48 PM	#131
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: 1953 Burb build What's the latest on the paint, any pics or???...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

12-21-2014, 03:08 PM	#132
Iceburgh Registered User Join Date: Jan 2014 Location: New Bloomfield pa. Posts: 644	Re: 1953 Burb build Paint booth is full for another week or so I would guess. I was down on Friday my buddy is finishing another job then we are going to get started on mine. I am off the next two weeks so hope to get it down and get a good amount of work done. I did start on the interior panels while waiting __________________ 1953 suburban build http://67-72chevytrucks.com/vboard/s...d.php?t=621331

12-21-2014, 06:24 PM	#133
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: 1953 Burb build Bummer on waiting to paint, I see the tape across the dash, is it going to be two-tone??...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

12-21-2014, 08:08 PM	#134
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: 1953 Burb build Nice Iceburgh...looking forward to seeing the color(s)! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

12-21-2014, 11:47 PM	#137
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,774	Re: 1953 Burb build Looking good. Where did you get your ABS panels? I've never worked with the stuff. I did all of the interior in my 48. I really enjoyed the process. Good luck over Christmas getting some work in.. Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

12-22-2014, 09:50 PM	#138
Iceburgh Registered User Join Date: Jan 2014 Location: New Bloomfield pa. Posts: 644	Re: 1953 Burb build Totalplastics.com. They have a few places in Mi. Cheaper to pick up. __________________ 1953 suburban build http://67-72chevytrucks.com/vboard/s...d.php?t=621331

12-26-2014, 06:54 PM	#140
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: 1953 Burb build Nice!!!!! Keep on Truckin'' __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,

01-12-2015, 09:15 PM	#141
Iceburgh Registered User Join Date: Jan 2014 Location: New Bloomfield pa. Posts: 644	Re: 1953 Burb build Out of the garage and down the road ( on the coldest day of the year) some more interior done before it left __________________ 1953 suburban build http://67-72chevytrucks.com/vboard/s...d.php?t=621331

01-12-2015, 09:44 PM	#142
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: 1953 Burb build Looking good Iceburgh...where did you get the door panel? __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

01-12-2015, 10:19 PM	#143
Iceburgh Registered User Join Date: Jan 2014 Location: New Bloomfield pa. Posts: 644	Re: 1953 Burb build Got them from Rod doors. Same as what Zi have in my truck. The guy who bought roddoors I have been told does it part time and deals through classic chevy and chevy of the 40's. I am not sure if that is the case I have had mine for a while just sitting around __________________ 1953 suburban build http://67-72chevytrucks.com/vboard/s...d.php?t=621331

01-13-2015, 12:15 PM	#144
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,774	Re: 1953 Burb build The progress looks good Iceburgh. Yes. the weather in MI is very cold at the moment as well... Keep it up Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

02-08-2015, 12:43 AM	#145
Iceburgh Registered User Join Date: Jan 2014 Location: New Bloomfield pa. Posts: 644	Re: 1953 Burb build Well my buddy got his new paint booth up and running after moving to the new shop. 1st car is done. Mine rolls in next. We played with the door gaps while waiting. Cut and re-welded the inside where the hinges go and also cut the pillar and pushed the top of the door in. Gaps are perfect now. Final primer and wet sand Mon. Maybe Thur paint but with the numerous layers and colors it will take about 8-10 days before the clear and buff. __________________ 1953 suburban build http://67-72chevytrucks.com/vboard/s...d.php?t=621331



Register or Log In To remove these advertisements.

02-08-2015, 12:48 AM	#146
Iceburgh Registered User Join Date: Jan 2014 Location: New Bloomfield pa. Posts: 644	Re: 1953 Burb build a little more of the interior covered as well __________________ 1953 suburban build http://67-72chevytrucks.com/vboard/s...d.php?t=621331

02-08-2015, 01:22 AM	#147
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: 1953 Burb build Looking good, I know you'll be happy to see it in paint....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-08-2015, 01:54 AM	#148
Iceburgh Registered User Join Date: Jan 2014 Location: New Bloomfield pa. Posts: 644	Re: 1953 Burb build __________________ 1953 suburban build http://67-72chevytrucks.com/vboard/s...d.php?t=621331

02-08-2015, 08:48 AM	#149
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: 1953 Burb build Nice work on the door gaps. They look good. Looking forward to seeing it in color. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

02-08-2015, 11:20 PM	#150
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,774	Re: 1953 Burb build looking good. Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.