The Burb a long time coming - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ajgriffin · 08-27-2019, 06:19 PM

Lots of machinists out there that could handle that kind of job. Check out Mike Curtis of Curtis Speed, Jason Britz on Instagram @jason62702, Rad Machining on Instagram @radmachining, or EVOD Industries

Burb · 12-09-2019, 04:10 PM

Picked up a Flex-A-Lite Extruded Tube Core Radiator and Dual Fan Combo to hide under the SelfMade radiator cover ... the product reviews seem good, also came with their multi-speed fan controller built in...

Average Joe · 12-12-2019, 10:30 PM

Nice work! ^^^^^^^^

Burb · 02-04-2020, 05:23 PM

Have some cleaner shots of the engine bay

Burb · 02-04-2020, 05:26 PM

And solved that transmission / tight body mod ... made the frame and body real tight but when we lowered the body the 700R4 got crowded so I thought maybe high hump for clearance just need to remember to change the carpet selection

FLYNAVY30 · 02-05-2020, 08:03 PM

Love your build....hoping to one day go the same direction with mine, but with a 4 wheel drive set up.

Burb · 02-24-2020, 01:32 PM

Rocky working on the fire wall

Burb · 12-11-2020, 04:11 PM

Hood is complete

Burb · 12-11-2020, 04:14 PM

project is home for Covid but must endure ...

**kev2809** · 12-13-2020, 08:07 PM

build is coming along nice man love that underhood work!

Burb · 12-17-2020, 05:49 PM

Ya gotta a lot of work to do ... waiting on the holidays to be over so I can try and get a lift in at the house, so I can pull the body back off.

Burb · 12-17-2020, 05:51 PM

Still need to raise the floor in the back and will probably do a mini tub at the same time

Burb · 12-22-2020, 12:26 PM

Needed to make some changes on the front to get the height I was hoping for

Burb · 12-22-2020, 12:30 PM

I think this is pretty close ... now I need to put the inner fenders back on and work on tire and wheel numbers

Burb · 12-22-2020, 12:36 PM

Fun space

**kev2809** · 12-22-2020, 07:21 PM

what bags did u have.. and swap to?

Burb · 01-07-2021, 06:11 PM

Well, first set were SS6 Slam bags but I wanted more height and switch to D2600 Dominators got me closer to ride height now I need to channel the rear a little more and raise the inner fender wells

**kev2809** · 01-07-2021, 08:40 PM

i have the dominator 2500s up front because my cupped arms are 8 1/4" pipe. i had 2600s up front but it seems super close to touching when aired out. im tearing everything apart to paint the front clip and im thinking of trying to put some 2600s back in there after grinding the cup edge down (something i should of done the first time).

was hoping those you pulled out were ss7's, those seem to be nice bags and dont balloon out.

Burb · 01-20-2021, 11:09 AM

Ya, I need to get a lift on order so I can pull the body back off and do a little work on the rear of the chassis for a more level aired out, probably cut on the frame a bit

LT7A · 05-24-2021, 07:04 AM

Wow, this is a high intensity build. I'm sorry to see that covid got in the way of your plans. Have you been able to move any of it forward since your last post?

Burb · 05-27-2021, 12:11 PM

Some ... tore a wall out in the garage for little more room.

Burb · 05-27-2021, 12:15 PM

And then I went ahead and pulled the motor and transmission

Burb · 05-27-2021, 12:20 PM

cleaned up the dog house a little ... want to do some more work on the new steering column setting for the rack, changing the firewall mount

**kev2809** · 06-05-2021, 08:30 AM

good progress!

boy do I miss working in my garage......

**kev2809** · 11-21-2021, 01:08 PM

any updates on this?

08-27-2019, 06:19 PM	#126
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 585	Re: The Burb a long time coming Lots of machinists out there that could handle that kind of job. Check out Mike Curtis of Curtis Speed, Jason Britz on Instagram @jason62702, Rad Machining on Instagram @radmachining, or EVOD Industries __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

12-09-2019, 04:10 PM	#127
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Picked up a Flex-A-Lite Extruded Tube Core Radiator and Dual Fan Combo to hide under the SelfMade radiator cover ... the product reviews seem good, also came with their multi-speed fan controller built in... Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

12-12-2019, 10:30 PM	#128
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	Re: The Burb a long time coming Nice work! ^^^^^^^^ __________________ 1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843

02-04-2020, 05:23 PM	#129
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Have some cleaner shots of the engine bay Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

02-04-2020, 05:26 PM	#130
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming And solved that transmission / tight body mod ... made the frame and body real tight but when we lowered the body the 700R4 got crowded so I thought maybe high hump for clearance just need to remember to change the carpet selection Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

02-05-2020, 08:03 PM	#131
FLYNAVY30 Registered User Join Date: Apr 2013 Location: Austin, TX Posts: 592	Re: The Burb a long time coming Love your build....hoping to one day go the same direction with mine, but with a 4 wheel drive set up. __________________ 1972 C20 Suburban 1964 Corvette Coupe 1997 Lexus LX450

02-24-2020, 01:32 PM	#132
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Rocky working on the fire wall Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

12-11-2020, 04:11 PM	#133
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Hood is complete Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

12-11-2020, 04:14 PM	#134
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming project is home for Covid but must endure ... Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

12-13-2020, 08:07 PM	#135
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,174	Re: The Burb a long time coming build is coming along nice man love that underhood work! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-17-2020, 05:49 PM	#136
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Ya gotta a lot of work to do ... waiting on the holidays to be over so I can try and get a lift in at the house, so I can pull the body back off. __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

12-17-2020, 05:51 PM	#137
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Still need to raise the floor in the back and will probably do a mini tub at the same time Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

12-22-2020, 12:26 PM	#138
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Needed to make some changes on the front to get the height I was hoping for Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

12-22-2020, 12:30 PM	#139
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming I think this is pretty close ... now I need to put the inner fenders back on and work on tire and wheel numbers Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

12-22-2020, 12:36 PM	#140
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Fun space Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be



Register or Log In To remove these advertisements.

12-22-2020, 07:21 PM	#141
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,174	Re: The Burb a long time coming what bags did u have.. and swap to? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-07-2021, 06:11 PM	#142
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Well, first set were SS6 Slam bags but I wanted more height and switch to D2600 Dominators got me closer to ride height now I need to channel the rear a little more and raise the inner fender wells __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

01-07-2021, 08:40 PM	#143
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,174	Re: The Burb a long time coming i have the dominator 2500s up front because my cupped arms are 8 1/4" pipe. i had 2600s up front but it seems super close to touching when aired out. im tearing everything apart to paint the front clip and im thinking of trying to put some 2600s back in there after grinding the cup edge down (something i should of done the first time). was hoping those you pulled out were ss7's, those seem to be nice bags and dont balloon out. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-20-2021, 11:09 AM	#144
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Ya, I need to get a lift on order so I can pull the body back off and do a little work on the rear of the chassis for a more level aired out, probably cut on the frame a bit Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

05-24-2021, 07:04 AM	#145
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,619	Re: The Burb a long time coming Wow, this is a high intensity build. I'm sorry to see that covid got in the way of your plans. Have you been able to move any of it forward since your last post?

05-27-2021, 12:11 PM	#146
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Some ... tore a wall out in the garage for little more room. Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be Last edited by Burb; 05-27-2021 at 12:31 PM.

05-27-2021, 12:15 PM	#147
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming And then I went ahead and pulled the motor and transmission Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

05-27-2021, 12:20 PM	#148
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming cleaned up the dog house a little ... want to do some more work on the new steering column setting for the rack, changing the firewall mount Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

06-05-2021, 08:30 AM	#149
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,174	Re: The Burb a long time coming good progress! boy do I miss working in my garage...... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-21-2021, 01:08 PM	#150
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,174	Re: The Burb a long time coming any updates on this? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode