slik ricks 67 short wide CST - Page 60 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevy1series · 03-22-2011, 12:59 PM

thanks for makin me feel better!

well guys no progress is being made because 3 things, 1 i am not feeling very good, 2 its has been raining non stop and 3 i cant push my truck in with all thses new brakes it is a pain in the @$$ my mom dad and one of my sisters ahd to help

usmcchevy · 03-22-2011, 02:16 PM

Its alright man, first time I did a set of drum brakes it took me over an hr per side using the link oldblue posted.. Now I can have them apart, cleaned and reassembled in under 15min. When you switch the shoes around leave the adjusters a bit loose. Then you will be able to move your truck and they will be adjusted the first or second time you back up.

67chevy1series · 03-22-2011, 02:17 PM

so having all the brakes back wards and stuff is making it hard to push right? if so then that is good news because my mom said i can t push my truck out very much anymore since it is so hard

usmcchevy · 03-22-2011, 05:15 PM

I wouldn't think it would make it harder to push, just less effective stopping going forward. The reason they drag is all the parts are new and tight, if you back the adjusters off a bit they shouldn't drag at all.

67chevy1series · 03-22-2011, 07:11 PM

well its wierd its not hard to push anymore..... and the adjusters are completey backed off!

oldblue1968chevy · 03-22-2011, 07:40 PM

Its not that bad after you do it a time or 2

67chevy1series · 03-22-2011, 07:43 PM

haha , i pulled the gas tank so when the new one arrives i can install it anyone know where i can get a ''flamible gas'' sticker? i wanna put one on my gas tank

jbclassix · 03-22-2011, 10:49 PM

google DOT signs

67chevy1series · 03-23-2011, 01:26 AM

well after watching about 63 vidoes of a guy called "restodan" and he did alot of work to his 63 impala.......lets just say it is really mtivating me to go out and start mine!!!!!!!!!!!! stay tuned guys!

Cambons · 03-23-2011, 04:52 AM

yeah ive seen restodans videos he has gone a ways with that impala ab=nd so is this truck hope our feel better soon man

67chevy1series · 03-23-2011, 10:29 AM

ya i dont want him to paint it because it has such nice patina but hey its his car! thanks cambons! i am feeling better

, and will be working on it today, i just wish orange county would hurry up and send me my parts!!!!!!!!!!!!!!!!!!

67chevy1series · 03-23-2011, 08:13 PM

i received in the mail my rear: lenses, gaskets light bulbs.....the red lenses say '' guide it sae stia 67 '' so i am pretty sure they are reproduced because there is no part number but maybe they could be nos but i am 75 % sure there not

any ways also got my ignition switch retaining nut and tool and my control arm rubbers

oldblue1968chevy · 03-24-2011, 10:41 AM

Ignition switch should be able to come out without special tool, mine did.

I used a small hammer/flathead screwdriver or other chizel type device

and tap it around till its loose/off.

67chevy1series · 03-24-2011, 06:08 PM

well that didnt work when we took mine out (the original back in 2009) so with this tool we will never mess another one up

well somthins wrong my ignition is sliding throught the dash with the retaining ring all the way tight ( it will come forward maybe an inch) so i might have a 68 72 ignition

sucks having (almost) one year truck... just about everything in the dash and including the dash is different, sucks.

JasonBird · 03-24-2011, 07:05 PM

sounds like an original lens to me...i think all of mine say that.

67chevy1series · 03-24-2011, 09:27 PM

well guys i am having 2 problems, 1 its raining tommorow and the next day and it has been raining since saturday

so that is why no pics of the truck or its new stuff (sorry guys). and my second problem, my ignition isnt fitting right in my dash, it needs this thing that goes behind the dash in order to make it not come throught the dash, so the retaining ring can tighten against it.... well thats what i think i need can anyone help me!

i am still a young guy!

slick copper · 03-25-2011, 05:38 AM

Quote:

Originally Posted by 67chevy1series

well guys i am having 2 problems, 1 its raining tommorow and the next day and it has been raining since saturday

so that is why no pics of the truck or its new stuff (sorry guys). and my second problem, my ignition isnt fitting right in my dash, it needs this thing that goes behind the dash in order to make it not come throught the dash, so the retaining ring can tighten against it.... well thats what i think i need can anyone help me!

i am still a young guy!

This help any? (copied from LMC)
Name: 0049.jpg
Views: 381
Size: 112.0 KB

Missing any of that? Hope that helps Rick, keep us posted!

67chevy1series · 03-25-2011, 08:48 PM

that helps thanks slick copper! keep us posted you say?

usmcchevy · 03-25-2011, 09:22 PM

Lookin' good!

67chevy1series · 03-25-2011, 09:35 PM

thank you ben!

JasonBird · 03-25-2011, 09:42 PM

looking good Rick!

67chevy1series · 03-25-2011, 09:43 PM

thank you jason!!!!!!

oldblue1968chevy · 03-25-2011, 09:59 PM

Dang its lookin' GREAT rick. That motor looks awesome I love it! Ram horns script valve covers all of its PERFECT! Just clean up the wiring. Trim looks good too. Every time im in town (I live in the country) its late and the parts store is closed for my clips, and prom is crazy $. But im GOING to start getting it back on about the time your trucks on the road

jk it looks good man.

pulltilbroke · 03-25-2011, 10:20 PM

I like it, Clean and simple!!

2manyprojects · 03-25-2011, 10:25 PM

Quote:

Originally Posted by 67chevy1series

well guys i am having 2 problems, 1 its raining tommorow and the next day and it has been raining since saturday

so that is why no pics of the truck or its new stuff (sorry guys). and my second problem, my ignition isnt fitting right in my dash, it needs this thing that goes behind the dash in order to make it not come throught the dash, so the retaining ring can tighten against it.... well thats what i think i need can anyone help me!

i am still a young guy!

You need a early 67 ignition spacer if you have the small hole. Good luck, I've been trying to find one for my green truck. All of the repro ones are the later style from what I've seen.

03-22-2011, 12:59 PM	#1476
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST thanks for makin me feel better! well guys no progress is being made because 3 things, 1 i am not feeling very good, 2 its has been raining non stop and 3 i cant push my truck in with all thses new brakes it is a pain in the @$$ my mom dad and one of my sisters ahd to help

03-22-2011, 02:16 PM	#1477
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: slik ricks 67 short wide CST Its alright man, first time I did a set of drum brakes it took me over an hr per side using the link oldblue posted.. Now I can have them apart, cleaned and reassembled in under 15min. When you switch the shoes around leave the adjusters a bit loose. Then you will be able to move your truck and they will be adjusted the first or second time you back up. __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

03-22-2011, 02:17 PM	#1478
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST so having all the brakes back wards and stuff is making it hard to push right? if so then that is good news because my mom said i can t push my truck out very much anymore since it is so hard

03-22-2011, 05:15 PM	#1479
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: slik ricks 67 short wide CST I wouldn't think it would make it harder to push, just less effective stopping going forward. The reason they drag is all the parts are new and tight, if you back the adjusters off a bit they shouldn't drag at all. __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

03-22-2011, 07:11 PM	#1480
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well its wierd its not hard to push anymore..... and the adjusters are completey backed off!

03-22-2011, 07:40 PM	#1481
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST Its not that bad after you do it a time or 2 __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-22-2011, 07:43 PM	#1482
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST haha , i pulled the gas tank so when the new one arrives i can install it anyone know where i can get a ''flamible gas'' sticker? i wanna put one on my gas tank

03-22-2011, 10:49 PM	#1483
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: slik ricks 67 short wide CST google DOT signs __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

03-23-2011, 01:26 AM	#1484
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well after watching about 63 vidoes of a guy called "restodan" and he did alot of work to his 63 impala.......lets just say it is really mtivating me to go out and start mine!!!!!!!!!!!! stay tuned guys!

03-23-2011, 04:52 AM	#1485
Cambons Registered User Join Date: Jan 2010 Location: SO Cali Posts: 37	Re: slik ricks 67 short wide CST yeah ive seen restodans videos he has gone a ways with that impala ab=nd so is this truck hope our feel better soon man

03-23-2011, 10:29 AM	#1486
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST ya i dont want him to paint it because it has such nice patina but hey its his car! thanks cambons! i am feeling better, and will be working on it today, i just wish orange county would hurry up and send me my parts!!!!!!!!!!!!!!!!!!

03-23-2011, 08:13 PM	#1487
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST i received in the mail my rear: lenses, gaskets light bulbs.....the red lenses say '' guide it sae stia 67 '' so i am pretty sure they are reproduced because there is no part number but maybe they could be nos but i am 75 % sure there not any ways also got my ignition switch retaining nut and tool and my control arm rubbers

03-24-2011, 10:41 AM	#1488
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST Ignition switch should be able to come out without special tool, mine did. I used a small hammer/flathead screwdriver or other chizel type device and tap it around till its loose/off. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-24-2011, 06:08 PM	#1489
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well that didnt work when we took mine out (the original back in 2009) so with this tool we will never mess another one up well somthins wrong my ignition is sliding throught the dash with the retaining ring all the way tight ( it will come forward maybe an inch) so i might have a 68 72 ignition sucks having (almost) one year truck... just about everything in the dash and including the dash is different, sucks.

03-24-2011, 07:05 PM	#1490
JasonBird '67 C-10 LWB Driver Join Date: Dec 2010 Location: Andover, Kansas Posts: 380	Re: slik ricks 67 short wide CST sounds like an original lens to me...i think all of mine say that. __________________ '67 C-10 LWB - My Build Thread '67 C-20 LWB - My Donor/ Parts truck - SOLD! '92 GMC SAFARI VAN - My Parts Go Getter '06 KIA SPORTAGE EX - My Commuter "All of this crap better make a truck!" - my wife Sue. Proud U.S.M.C. Dad!



Register or Log In To remove these advertisements.

03-24-2011, 09:27 PM	#1491
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well guys i am having 2 problems, 1 its raining tommorow and the next day and it has been raining since saturday so that is why no pics of the truck or its new stuff (sorry guys). and my second problem, my ignition isnt fitting right in my dash, it needs this thing that goes behind the dash in order to make it not come throught the dash, so the retaining ring can tighten against it.... well thats what i think i need can anyone help me! i am still a young guy!

03-25-2011, 08:48 PM	#1493
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST that helps thanks slick copper! keep us posted you say? Attached Images

03-25-2011, 09:22 PM	#1494
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: slik ricks 67 short wide CST Lookin' good! __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

03-25-2011, 09:35 PM	#1495
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST thank you ben!

03-25-2011, 09:42 PM	#1496
JasonBird '67 C-10 LWB Driver Join Date: Dec 2010 Location: Andover, Kansas Posts: 380	Re: slik ricks 67 short wide CST looking good Rick! __________________ '67 C-10 LWB - My Build Thread '67 C-20 LWB - My Donor/ Parts truck - SOLD! '92 GMC SAFARI VAN - My Parts Go Getter '06 KIA SPORTAGE EX - My Commuter "All of this crap better make a truck!" - my wife Sue. Proud U.S.M.C. Dad!

03-25-2011, 09:43 PM	#1497
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST thank you jason!!!!!!

03-25-2011, 09:59 PM	#1498
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST Dang its lookin' GREAT rick. That motor looks awesome I love it! Ram horns script valve covers all of its PERFECT! Just clean up the wiring. Trim looks good too. Every time im in town (I live in the country) its late and the parts store is closed for my clips, and prom is crazy $. But im GOING to start getting it back on about the time your trucks on the road jk it looks good man. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-25-2011, 10:20 PM	#1499
pulltilbroke Registered User Join Date: Mar 2008 Location: Eagle Ne Posts: 356	Re: slik ricks 67 short wide CST I like it, Clean and simple!! __________________ 60 4x4,235,SM420,Rockwell T221,D44/HO33 sold 4/12 67 C-20,292,SM420,HO72 90 Dodge W250 Cummins,NV4500HD,205,D60/D80 93 Dodge W350 Dually Cummins, Getrag, 205,D60/D70

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.