|
08-30-2015, 11:40 AM
|
#1501 |
|
Registered User
Join Date: May 2014
Location: SAN FRANCISCO
Posts: 447
|
Re: What did you do to your truck today part III
Ordered a new Fuel Pump! Since putting in my 292 (used CL) it's had a pretty good tick. The motor starts and runs fine, good even. Doesn't smoke or seem to burn oil. Does have a couple of good oil leaks (oil pan and maybe rear seal) but this tick has been really bugging me. I've been reluctant to deal with the oil leaks only to have the thing grenade on me... Anyway, I've adjusted the valves a couple times and tightened the exhaust etc. but nothing made a difference.
So yesterday I was changing some grommets on the valve cover (one leak I figured I could at least address) and I fired it up and for whatever reason it I could suddenly tell the tick wasn't coming from up top. I grabbed a long screwdriver and sure enough the only place you can hear the tick is from the damn fuel pump!! Won't know for sure till I get the new one in but fingers crossed.
__________________
'66 C10 SWB '64 C2 roadster '38 Indian Scout Flattracker '70 Triumph T120R '81 Laverda Jota |
|
|
08-30-2015, 02:04 PM
|
#1502 | |
|
Registered User
Join Date: Jan 2013
Location: Columbia, SC
Posts: 1,927
|
Re: What did you do to your truck today part III
Quote:
Truck looks great! Really great! Please tell me about the hole(s) you have cut in the firewall on the PS. I assume they are for AC since I see a compressor and AC vents. How did you decide where to cut holes and what will you install? Vintage Air?
__________________
My 65 C10 build: www.lugnutz65chevystepside.weebly.com Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild. |
|
|
|
|
08-30-2015, 07:25 PM
|
#1503 |
|
Registered User
 
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: What did you do to your truck today part III
Got the front hubs and wheels on. Then rolled the chassis out for some fresh air.
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
|
|
|
08-30-2015, 08:10 PM
|
#1504 | |
|
Senior Member
Join Date: Mar 2015
Location: Arizona from Overland Park Kansas
Posts: 3,968
|
Re: What did you do to your truck today part III
Quote:
|
|
|
|
|
08-30-2015, 08:43 PM
|
#1505 | |
|
Registered User
Join Date: Sep 2010
Location: Winchester Oregon, formerly Vancouver BC
Posts: 2,949
|
Re: What did you do to your truck today part III
Quote:
|
|
|
|
|
08-30-2015, 09:04 PM
|
#1506 | |
|
Registered User
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: What did you do to your truck today part III
Quote:
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
|
|
|
|
08-30-2015, 09:21 PM
|
#1507 |
|
Registered User
Join Date: Feb 2015
Location: PONCA CITY
Posts: 132
|
Re: What did you do to your truck today part III
Finally got the hubs and calipers on I am suppose to get my parking brake in the mail tomorrow from inline. That's all that stands between me and a roller.
|
|
|
|
08-30-2015, 10:37 PM
|
#1508 |
|
Registered User
 
Join Date: Sep 2006
Location: San Francisco
Posts: 4,782
|
Re: What did you do to your truck today part III
I didn't work on my truck today but I did work on my brothers car. I am putting disc brakes in his 64 Valiant. I am using discs from a 75 Duster. As I was changing the wheel bearings I notice this on the left rotor. I guess he took his car to Midas to have the brakes done. Someone put the seals in backwards.
__________________
"A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536 |
|
|
|
08-30-2015, 11:15 PM
|
#1509 |
|
Registered User
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,772
|
Re: What did you do to your truck today part III
Got a call from the painter who wanted to go over the paint colors and have them verified before spraying. If all goes well the bed should be finished by Sept 12.
__________________
http://s1299.photobucket.com/user/jb...23904108567829 |
|
|
|
08-30-2015, 11:26 PM
|
#1510 |
|
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: What did you do to your truck today part III
Wow! Won't that be a sweet thing after all these years.
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502 |
|
|
|
08-31-2015, 10:13 AM
|
#1511 |
|
Registered User
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,772
|
Re: What did you do to your truck today part III
Yes it will be!!!, note the extra holes that the PO drill in the tail light area instead of getting some speed nuts. does not hurt anything, but WHY?? The painter also undercoated the insides of the bed as well. The sides are finally straight as well.
__________________
http://s1299.photobucket.com/user/jb...23904108567829 Last edited by jbgroby; 08-31-2015 at 10:22 AM. |
|
|
|
08-31-2015, 10:40 AM
|
#1512 | |
|
Moderator
 
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: What did you do to your truck today part III
Quote:
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
08-31-2015, 11:15 AM
|
#1513 |
|
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,572
|
Re: What did you do to your truck today part III
I was going to find some procrastination project to do, then realised the inner fenders will never clean themselves.
Both sides are now ready for paint prep, primer coat followed by Satin Black Two Pack paint.  Today after the inner fenders I finished reassembly of the heater unit and packed it away. The lid is away with Ian Brown for some special under hood treatment. The red you can see is a high density foam gasket I made to seal the fan to the metal case. 
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
|
|
|
08-31-2015, 02:37 PM
|
#1514 |
|
Where did THAT bolt go?
Join Date: Feb 2009
Location: Speedway, Indiana
Posts: 306
|
Re: What did you do to your truck today part III
I finished up shortening my '66 Suburban 3", in preparation for a body swap on a 2006 Trailblazer SS. I also removed the stock burb floor in one piece:
__________________
The Swiss Car Club......A drinking club with a car problem.... |
|
|
|
08-31-2015, 02:47 PM
|
#1515 | |
|
Registered User
Join Date: Sep 2010
Location: Winchester Oregon, formerly Vancouver BC
Posts: 2,949
|
Re: What did you do to your truck today part III
Quote:
|
|
|
|
|
08-31-2015, 07:02 PM
|
#1516 | |
|
Registered User
Join Date: Sep 2013
Location: Glendale, AZ
Posts: 290
|
Re: What did you do to your truck today part III
Quote:
|
|
|
|
|
09-01-2015, 02:06 AM
|
#1517 | |
|
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,572
|
Re: What did you do to your truck today part III
Quote:
I am not that clever or brave. Build thread please, or some thread for us to ooooohhh and aaaahhhh and be amazed by. 
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
|
|
|
|
09-01-2015, 11:48 AM
|
#1518 |
|
Registered User
Join Date: May 2012
Location: Sweden
Posts: 34
|
Re: What did you do to your truck today part III
I have weld some sheetmetal on my -62 panel this last week.
|
|
|
|
09-01-2015, 03:01 PM
|
#1519 |
|
Registered User
Join Date: Jul 2015
Location: Seattle
Posts: 228
|
Re: What did you do to your truck today part III
Not necessarily "today" but most recently (took me a week) I rebuilt the Rochester BV carburetor on my mystery year 250 i6.
Used a rebuild kit from Mike's Carburetors (www.carburetor-parts.com/) but had to order some extra bowl gaskets to overcome the warped parts! Also took a wire brush on the grinder and cleaned off the rust and old paint from the air cleaner. I really like the "polished patina" look when it was done so I hit it with a glossy clear coat. Thinking i'll do the valve cover and push rod covers the same. Not big steps I know, but she's running and driving again and pretty smooth too!
__________________
1961 Chevy Apache "BoomStick" -First build, lots of plans, little experience. What's the worst that could happen? http://67-72chevytrucks.com/vboard/s...d.php?t=694506 |
|
|
|
09-01-2015, 08:28 PM
|
#1520 |
|
Registered User
Join Date: Jul 2006
Location: Willis, Texas
Posts: 754
|
Re: What did you do to your truck today part III
In wanted holes in the firewall are patched and the floors covered with POR-15, tomorrow I'll start with the Rattletrap. Slow but at least it's progress
__________________
65Gregg Blue long bed White TBSS 61 Impala “The two most important days in your life are the day you are born and the day you find out why.” Mark Twain |
|
|
|
09-01-2015, 09:07 PM
|
#1521 |
|
State of Confusion!
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,216
|
Re: What did you do to your truck today part III
That looks very nice!
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
09-03-2015, 12:29 AM
|
#1522 | |
|
Registered User
Join Date: Jul 2006
Location: Willis, Texas
Posts: 754
|
Re: What did you do to your truck today part III
Quote:
__________________
65Gregg Blue long bed White TBSS 61 Impala “The two most important days in your life are the day you are born and the day you find out why.” Mark Twain |
|
|
|
|
09-03-2015, 04:44 PM
|
#1523 |
|
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,572
|
Re: What did you do to your truck today part III
Ordered my full set of mouldings and stainless bed strips from Mar-K today through Clem's Tuba Trucks.
Thanks Clem. Got home tonight and found this had arrived in the post from Ian Brown. I already reported on this cover, but have to say, in hand, it is even more impressive. I am seriously pleased and impressed with it. It is so difficult to capture the texture and look of this piece in a photo.  Of course I had to go trial fit it as well. Very pleased, very very pleased. 
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
|
|
|
09-03-2015, 06:54 PM
|
#1524 | |
|
Registered User
Join Date: Aug 2013
Location: corktown,mi.
Posts: 5,194
|
Re: What did you do to your truck today part III
Quote:
|
|
|
|
|
09-03-2015, 09:42 PM
|
#1525 |
|
Where did THAT bolt go?
Join Date: Feb 2009
Location: Speedway, Indiana
Posts: 306
|
Re: What did you do to your truck today part III
Ill post more pics in a build thread in the near future.
Im using the floor and firewall out of the Trailblazer SS.
__________________
The Swiss Car Club......A drinking club with a car problem.... |
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
