Its Mine the World Famous 67 Dragtruck - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 02-20-2006, 03:40 PM

Quote:

Originally Posted by bskylerj

Looking good. When do you plan on getting back on the road or your first race. Keep the udates and pics coming.

I hope to have it running in the next 2 or 3 weeks!

djracer · 02-20-2006, 09:20 PM

ttt

409biscayne · 02-20-2006, 10:07 PM

Quote:

Originally Posted by 67chevemall

The phone guy! Could ya get a bigger carb, that one is pretty small....

What carb , looked like the toilet bowl

The really neat thing is seeing the kid working on it as well . Thats cool

68Stepbed · 02-20-2006, 10:14 PM

Are you still running a crank trigger or did you go back with a dizzy?

Looks good. Let us know how well it runs. It's really cool to see your youngin help out. Hope mine helps me when he gets old enough. He trys to help me now but he's only three.

djracer · 02-21-2006, 12:34 AM

Quote:

Originally Posted by 409biscayne

What carb , looked like the toilet bowl

The really neat thing is seeing the kid working on it as well . Thats cool

I had a fuel injection system called a flying toilet on it last time!

djracer · 02-21-2006, 12:36 AM

Quote:

Originally Posted by 68Stepbed

Are you still running a crank trigger or did you go back with a dizzy?

Looks good. Let us know how well it runs. It's really cool to see your youngin help out. Hope mine helps me when he gets old enough. He trys to help me now but he's only three.

I am still running a crank trigger! I have an extra one for a bbc if anyone needs one!

djracer · 02-21-2006, 01:29 AM

here's my custom made plug wires and a front motor shot

bigjimzlll · 02-21-2006, 01:43 AM

where'd you find glass doors?

djracer · 02-21-2006, 04:59 AM

creative glassworks in oneida Tn they make grave diggers body!

djracer · 02-21-2006, 01:35 PM

custom length plug wires labeled at each end! and a front motor shot!

fletch4x4 · 02-21-2006, 02:57 PM

No fair... But seriously thats freakin awsome!

twotons · 02-21-2006, 11:37 PM

what thickness are you running on your engine front plate, and are you running a mid plate? i can not tell from the pic. I am putting a 66 together and was woundering about running just a front plate and how much flex there is in the chassis, although i am fully caged.

66 long bed, old engine went 10.78 @ 129mph,

this is the new 496, made 690 at the crank on the engine dyno with 92 octane.

djracer · 02-22-2006, 01:23 AM

I am running a 1/4 aluminum front plate and a thin steel mid plate and I am going to have two engine limiters one on each side coming from a plate mounted in the stock motor mount holes running up to a tube mounted to the frame!

Your motor sounds impressive especially on pump gas!

twotons · 02-22-2006, 02:04 AM

I am going to be running the new NX Gemini dual stage plate, 150 hp on the first stage and 200 to 250 on the secound stage, the truck is all steele with a fatman stainless arm manual rack frount end, with the 11 inch disc brakes. Running a Dana 60 with ramp style posi, 4 10 gears and 35 spline stange axles. I am running a hipster brake TH 400 with a 4500 stall. the truck with my not so skinny ass in it wieghs in at 4000 pounds with 10 gallons of fuel, 2 10 pound NOS bottle and batties.

Hoping the new set up runs in the mid to high 9's with a ultimate goal of 9.90 on pump 92 octane fuel.

twotons · 02-22-2006, 12:11 PM

What headers are you running? I am running a set of 70 Camaro Supercomps that i had to clearance the frame a bit, 2 inch primaries and 3.5 collectors. Just curious if there is something bigger in the primary i can buy that will fit without having Stan's or Lemon's build that will cost a small fotune.

Thanxs for the imfo.

djracer · 02-22-2006, 01:01 PM

mine are super comps for a malibu I thing they are 2 1/8 primarys!

twotons · 02-22-2006, 08:37 PM

sorry but what year malibu?????????

71Dragtruck · 02-22-2006, 09:57 PM

Quote:

Originally Posted by twotons

I am going to be running the new NX Gemini dual stage plate, 150 hp on the first stage and 200 to 250 on the secound stage, the truck is all steele with a fatman stainless arm manual rack frount end, with the 11 inch disc brakes. Running a Dana 60 with ramp style posi, 4 10 gears and 35 spline stange axles. I am running a hipster brake TH 400 with a 4500 stall. the truck with my not so skinny ass in it wieghs in at 4000 pounds with 10 gallons of fuel, 2 10 pound NOS bottle and batties.

Hoping the new set up runs in the mid to high 9's with a ultimate goal of 9.90 on pump 92 octane fuel.

What you running for compression? That's a lot of NOS for pump gas!

twotons · 02-22-2006, 10:17 PM

it is a 10.5 to 1 motor.

Flat 67 · 02-22-2006, 10:54 PM

Dj, what kind of mastercylinder do you have and/or what is it off of? Is it hard to stop seeing how you don't have a booster? Thanks for the response.......Flat 67

EyeH8the24 · 02-22-2006, 10:55 PM

awsome ride dj ...im in tallassee almost once a week ..would love to come see that ride bro ! .....maybe even take it for a shake down hehe!

djracer · 02-23-2006, 12:29 AM

Quote:

Originally Posted by twotons

sorry but what year malibu?????????

78-87 malibu!

djracer · 02-23-2006, 12:32 AM

Quote:

Originally Posted by Flat 67

Dj, what kind of mastercylinder do you have and/or what is it off of? Is it hard to stop seeing how you don't have a booster? Thanks for the response.......Flat 67

I'm not sure what the master cylinder is off of but it has drag race disc brakes on all four corners and most drag cars don't make enough vacuum for a booster!

twotons · 02-23-2006, 01:31 AM

the master cylinder looks like a um um um, well i think it is a Dodge car master,lol. Lots of them get used becuase of the light wieght design and larg bore for more braking power.

bigjimzlll · 02-23-2006, 01:40 AM

I have a strange master cylinder..1 " bore looks just like that one..hey two tons..you ought to come down to redding CA some time..we have a nice track and It would be neat to race another quick truck.

02-20-2006, 09:20 PM	#152
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: drag truck update with pics ttt __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-20-2006, 10:14 PM	#154
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: drag truck update with pics Are you still running a crank trigger or did you go back with a dizzy? Looks good. Let us know how well it runs. It's really cool to see your youngin help out. Hope mine helps me when he gets old enough. He trys to help me now but he's only three. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

02-21-2006, 01:29 AM	#157
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: drag truck update with pics here's my custom made plug wires and a front motor shot Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! Last edited by djracer; 02-21-2006 at 01:30 AM.

02-21-2006, 01:43 AM	#158
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Re: drag truck update with pics where'd you find glass doors? __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

02-21-2006, 04:59 AM	#159
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: drag truck update with pics creative glassworks in oneida Tn they make grave diggers body! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-21-2006, 01:35 PM	#160
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: drag truck update with pics custom length plug wires labeled at each end! and a front motor shot! Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-21-2006, 02:57 PM	#161
fletch4x4 Registered User Join Date: Apr 2005 Location: Central CT Posts: 237	Re: drag truck update with pics No fair... But seriously thats freakin awsome! __________________ Bagged/Turbo 1970 GMC C-10 Crew Cab 1984 Chevy R-20

02-21-2006, 11:37 PM	#162
twotons Registered User Join Date: Feb 2006 Location: Otis Orchards Posts: 132	Re: drag truck update with pics what thickness are you running on your engine front plate, and are you running a mid plate? i can not tell from the pic. I am putting a 66 together and was woundering about running just a front plate and how much flex there is in the chassis, although i am fully caged. 66 long bed, old engine went 10.78 @ 129mph, this is the new 496, made 690 at the crank on the engine dyno with 92 octane. __________________ 66 Chevy P/U 1/2 ton (new best Oct 09 9.78 @ 139 w/1.3760ft) http://i8.photobucket.com/albums/a41...erdd5d5045.gif

02-22-2006, 01:23 AM	#163
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: drag truck update with pics I am running a 1/4 aluminum front plate and a thin steel mid plate and I am going to have two engine limiters one on each side coming from a plate mounted in the stock motor mount holes running up to a tube mounted to the frame! Your motor sounds impressive especially on pump gas! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-22-2006, 02:04 AM	#164
twotons Registered User Join Date: Feb 2006 Location: Otis Orchards Posts: 132	Re: drag truck update with pics I am going to be running the new NX Gemini dual stage plate, 150 hp on the first stage and 200 to 250 on the secound stage, the truck is all steele with a fatman stainless arm manual rack frount end, with the 11 inch disc brakes. Running a Dana 60 with ramp style posi, 4 10 gears and 35 spline stange axles. I am running a hipster brake TH 400 with a 4500 stall. the truck with my not so skinny ass in it wieghs in at 4000 pounds with 10 gallons of fuel, 2 10 pound NOS bottle and batties. Hoping the new set up runs in the mid to high 9's with a ultimate goal of 9.90 on pump 92 octane fuel. __________________ 66 Chevy P/U 1/2 ton (new best Oct 09 9.78 @ 139 w/1.3760ft) http://i8.photobucket.com/albums/a41...erdd5d5045.gif

02-22-2006, 12:11 PM	#165
twotons Registered User Join Date: Feb 2006 Location: Otis Orchards Posts: 132	Re: drag truck update with pics What headers are you running? I am running a set of 70 Camaro Supercomps that i had to clearance the frame a bit, 2 inch primaries and 3.5 collectors. Just curious if there is something bigger in the primary i can buy that will fit without having Stan's or Lemon's build that will cost a small fotune. Thanxs for the imfo. __________________ 66 Chevy P/U 1/2 ton (new best Oct 09 9.78 @ 139 w/1.3760ft) http://i8.photobucket.com/albums/a41...erdd5d5045.gif Last edited by twotons; 02-22-2006 at 12:13 PM.

02-22-2006, 01:01 PM	#166
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: drag truck update with pics mine are super comps for a malibu I thing they are 2 1/8 primarys! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-22-2006, 08:37 PM	#167
twotons Registered User Join Date: Feb 2006 Location: Otis Orchards Posts: 132	Re: drag truck update with pics sorry but what year malibu????????? __________________ 66 Chevy P/U 1/2 ton (new best Oct 09 9.78 @ 139 w/1.3760ft) http://i8.photobucket.com/albums/a41...erdd5d5045.gif

02-22-2006, 10:17 PM	#169
twotons Registered User Join Date: Feb 2006 Location: Otis Orchards Posts: 132	Re: drag truck update with pics it is a 10.5 to 1 motor. __________________ 66 Chevy P/U 1/2 ton (new best Oct 09 9.78 @ 139 w/1.3760ft) http://i8.photobucket.com/albums/a41...erdd5d5045.gif

02-22-2006, 10:54 PM	#170
Flat 67 Junior Member Join Date: Sep 2005 Location: Fresno,California Posts: 224	Re: drag truck update with pics Dj, what kind of mastercylinder do you have and/or what is it off of? Is it hard to stop seeing how you don't have a booster? Thanks for the response.......Flat 67



Register or Log In To remove these advertisements.

02-22-2006, 10:55 PM	#171
EyeH8the24 Registered User Join Date: Dec 2004 Location: beulah,alabama Posts: 1,075	Re: drag truck update with pics awsome ride dj ...im in tallassee almost once a week ..would love to come see that ride bro ! .....maybe even take it for a shake down hehe!

02-23-2006, 01:31 AM	#174
twotons Registered User Join Date: Feb 2006 Location: Otis Orchards Posts: 132	Re: drag truck update with pics the master cylinder looks like a um um um, well i think it is a Dodge car master,lol. Lots of them get used becuase of the light wieght design and larg bore for more braking power. __________________ 66 Chevy P/U 1/2 ton (new best Oct 09 9.78 @ 139 w/1.3760ft) http://i8.photobucket.com/albums/a41...erdd5d5045.gif

02-23-2006, 01:40 AM	#175
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Re: drag truck update with pics I have a strange master cylinder..1 " bore looks just like that one..hey two tons..you ought to come down to redding CA some time..we have a nice track and It would be neat to race another quick truck. __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.