When Free Isn't Cheap Enough... - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rlm316 · 10-18-2007, 12:58 PM

There looks to be a hose from the top of the waterpump to the head. I don't remember there being one of those on the early small blocks. Are you sure that it's not a corporate engine? A friend of mine had a 455 buick in his '72 a few years ago. He said all you needed to do was change the frame mounts to drop it in. What did the waterpump/ timing case area look like? Did the pump look like a regular chevy?

Frizzle Fry · 10-21-2007, 12:49 AM

We got it! That was a looooong wet day and I'm goin to bed but I'll post pics tomorrow

Frizzle Fry · 10-21-2007, 04:59 PM

Well just about everything that could go wrong.... did, but we got it home safe so no complaints! One of the many things that went wrong was that the memory card had been taken out of the camera!!! So I only had room for 4 pics, but I reduced the res and was able to get more.

By the time we got there the property owner had already done all fun stuff... So it was basically a matter of loading er up on the trailer and pulling it home. Those back roads were basically no better than logging roads and Nick's Yukon got quite a workout getting the 6500lb load up/down/around to paved road.

It is a 3/4 ton and it does have one Chevy and one GMC fender.

I tried to scrub the block code clean last night but wasn't able to read the numbers without a wire-brush and/or solvent.

Just about every panel is bent or rotted in one way or another, but hey, the price turned out to be cheap enough after all

I'll take some more pics today, but here's the "rescue effort":

Frizzle Fry · 10-21-2007, 05:05 PM

as a bonus the guy let me keep the ten years worth of garbage in the back too...

Frizzle Fry · 10-21-2007, 05:12 PM

...and btw: It's a coil spring rear susp with helper leafs.

67ChevyRedneck · 10-21-2007, 05:18 PM

Glad you got 'er! There's nothin' on that truck you can't fix

retodd7711 · 10-21-2007, 05:31 PM

1 year 9 months you had to wait. Now the fun begins!

bad6772 · 10-21-2007, 06:35 PM

glad to see you got her...its about time.....good luck

FRENCHBLUE72 · 10-21-2007, 09:27 PM

Congrats on the rescue.....

**FleetsidePaul** · 10-22-2007, 01:06 PM

looks like a lot of fun, cant wait to see the scrubbed up pics, and hey you got a free bike too

stllookn · 10-26-2007, 10:27 PM

Great score! Looks much better than the POS that I just had to pay for but my engine sounds REALLY sweet!

chev74 · 10-26-2007, 11:29 PM

so did we find out what kind of motor it was?

How does the cab look on the inside?

What was the last year it was registered/inspected in?

Frizzle Fry · 10-27-2007, 12:19 PM

I'll go get the block code today. I got the wrong number on rescue day (front of pass head partial vin...).

The cab is ok. I've seen worse. It'll need outer floor boards and rockers for sure. Pass cab corner is tweaked and will either be replaced or straightened.

Thanks for all the comments. I know it's pretty wild that I ended up getting it 2 years later!

ColoradoK5 · 10-27-2007, 02:31 PM

Congrats what are the plans for it?

davidh · 10-27-2007, 03:17 PM

Is it running yet? little gas in the carb, fresh battery ca-boom! ready to work again.

Frizzle Fry · 11-03-2007, 01:03 PM

Quote:

Originally Posted by ColoradoK5

Congrats what are the plans for it?

Keep er stock if you can believe that

I need a truck to use as a TRUCK!

Quote:

Originally Posted by davidh

Is it running yet? little gas in the carb, fresh battery ca-boom! ready to work again.

I'm hopin. Won't get to work on it for another month or so... moving

Frizzle Fry · 11-03-2007, 01:07 PM

I did make it over there a few days ago to do a little pressure washing. Check it out:

Frizzle Fry · 11-03-2007, 01:08 PM

...more

Frizzle Fry · 11-03-2007, 01:15 PM

There is some wierd history I'm trying to piece together here. Maybe some of you guys can help me figure out what happened to this thing.

First, It's all eight lug with an eaton rear so I know it's a 3/4 ton.

But the VIN plate says max GVW 5000???

It has 1500 badges on both sides

The build sheet I found under the seat and meticulously taped together has a different VIN than the VIN plate... (it says 327 by the way)

Cab/fender/seat swap???

70rs/ss · 11-03-2007, 01:29 PM

Maybe a suspension swap? The seat could have easily been swapped, but to get 3/4 ton stuff under a half ton truck could only happen with a full suspension swap?

Frizzle Fry · 11-03-2007, 01:30 PM

pics

stllookn · 11-03-2007, 02:40 PM

Those look like 1/2 ton overload helper springs (1/2 springs). Maybe just axles and front cross member swap. Does the build sheet from the seat match the cab? I would ask what the title and registration say but I suspect they are both missing. BTW...that is just surface rust...LOL!

70rs/ss · 11-03-2007, 02:47 PM

Build sheet seams to match the helper spring, but the VIN is different? The seat is out of another truck, the suspension was added to the truck, that the only way, unless someone swapped the VIN plate (but it looks as original as the truck?) Get a title and get going, these things aren't going to keep it from being a work truck!!

davidh · 11-03-2007, 03:00 PM

check the frame vin, front drivers side frame rail, to cab and build sheet.

stllookn · 11-03-2007, 03:05 PM

Mike, You might try grabbing the vin off the frame on the top rail of the drivers side, just aft of the power steering pump.

10-18-2007, 12:58 PM	#151
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: When Free Isn't Cheap Enough... There looks to be a hose from the top of the waterpump to the head. I don't remember there being one of those on the early small blocks. Are you sure that it's not a corporate engine? A friend of mine had a 455 buick in his '72 a few years ago. He said all you needed to do was change the frame mounts to drop it in. What did the waterpump/ timing case area look like? Did the pump look like a regular chevy?

10-21-2007, 12:49 AM	#152
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: When Free Isn't Cheap Enough... We got it! That was a looooong wet day and I'm goin to bed but I'll post pics tomorrow

10-21-2007, 04:59 PM	#153
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: When Free Isn't Cheap Enough... Well just about everything that could go wrong.... did, but we got it home safe so no complaints! One of the many things that went wrong was that the memory card had been taken out of the camera!!! So I only had room for 4 pics, but I reduced the res and was able to get more. By the time we got there the property owner had already done all fun stuff... So it was basically a matter of loading er up on the trailer and pulling it home. Those back roads were basically no better than logging roads and Nick's Yukon got quite a workout getting the 6500lb load up/down/around to paved road. It is a 3/4 ton and it does have one Chevy and one GMC fender. I tried to scrub the block code clean last night but wasn't able to read the numbers without a wire-brush and/or solvent. Just about every panel is bent or rotted in one way or another, but hey, the price turned out to be cheap enough after all I'll take some more pics today, but here's the "rescue effort": Attached Images Last edited by Frizzle Fry; 10-21-2007 at 05:01 PM.

10-21-2007, 05:05 PM	#154
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: When Free Isn't Cheap Enough... as a bonus the guy let me keep the ten years worth of garbage in the back too... Attached Images Last edited by Frizzle Fry; 10-21-2007 at 05:10 PM.

10-21-2007, 05:12 PM	#155
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: When Free Isn't Cheap Enough... ...and btw: It's a coil spring rear susp with helper leafs.

10-21-2007, 05:18 PM	#156
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: When Free Isn't Cheap Enough... Glad you got 'er! There's nothin' on that truck you can't fix __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

10-21-2007, 05:31 PM	#157
retodd7711 chrome makes it go FASTER! Join Date: Feb 2007 Location: Cleveland Tennessee Posts: 2,884	Re: When Free Isn't Cheap Enough... 1 year 9 months you had to wait. Now the fun begins! __________________ She can't cook and she won't clean. But she looks good in a skirt and she brings me beer. She can stay for now. EDIT:: But she left me anyway, So forget her. 1962 GMC Stepside V6 4 speed My rolling resto thread http://67-72chevytrucks.com/vboard/s...d.php?t=324226 My old farm truck http://67-72chevytrucks.com/vboard/s...=1#post3465005

10-21-2007, 06:35 PM	#158
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: When Free Isn't Cheap Enough... glad to see you got her...its about time.....good luck

10-21-2007, 09:27 PM	#159
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: When Free Isn't Cheap Enough... Congrats on the rescue..... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-22-2007, 01:06 PM	#160
FleetsidePaul R.I.P. E.S.L.L. Join Date: Aug 2005 Location: Kernville CA./ Lake Isabella CA. Posts: 11,418	Re: When Free Isn't Cheap Enough... looks like a lot of fun, cant wait to see the scrubbed up pics, and hey you got a free bike too __________________ 1971 Custom C/20 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God.

10-26-2007, 10:27 PM	#161
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: When Free Isn't Cheap Enough... Great score! Looks much better than the POS that I just had to pay for but my engine sounds REALLY sweet! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-26-2007, 11:29 PM	#162
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Re: When Free Isn't Cheap Enough... so did we find out what kind of motor it was? How does the cab look on the inside? What was the last year it was registered/inspected in?

10-27-2007, 12:19 PM	#163
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: When Free Isn't Cheap Enough... I'll go get the block code today. I got the wrong number on rescue day (front of pass head partial vin...). The cab is ok. I've seen worse. It'll need outer floor boards and rockers for sure. Pass cab corner is tweaked and will either be replaced or straightened. Thanks for all the comments. I know it's pretty wild that I ended up getting it 2 years later!

10-27-2007, 02:31 PM	#164
ColoradoK5 Registered User Join Date: Jan 2007 Location: Denver Colorado Posts: 608	Re: When Free Isn't Cheap Enough... Congrats what are the plans for it?

10-27-2007, 03:17 PM	#165
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,220	Re: When Free Isn't Cheap Enough... Is it running yet? little gas in the carb, fresh battery ca-boom! ready to work again. __________________ Even the nicest dodge-chrysler is only 2years away from being parked outside of Section 8 housing.



Register or Log In To remove these advertisements.

11-03-2007, 01:07 PM	#167
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: When Free Isn't Cheap Enough... I did make it over there a few days ago to do a little pressure washing. Check it out: Attached Images

11-03-2007, 01:08 PM	#168
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: When Free Isn't Cheap Enough... ...more Attached Images

11-03-2007, 01:15 PM	#169
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: When Free Isn't Cheap Enough... There is some wierd history I'm trying to piece together here. Maybe some of you guys can help me figure out what happened to this thing. First, It's all eight lug with an eaton rear so I know it's a 3/4 ton. But the VIN plate says max GVW 5000??? It has 1500 badges on both sides The build sheet I found under the seat and meticulously taped together has a different VIN than the VIN plate... (it says 327 by the way) Cab/fender/seat swap???

11-03-2007, 01:29 PM	#170
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: When Free Isn't Cheap Enough... Maybe a suspension swap? The seat could have easily been swapped, but to get 3/4 ton stuff under a half ton truck could only happen with a full suspension swap?

11-03-2007, 01:30 PM	#171
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: When Free Isn't Cheap Enough... pics Attached Images

11-03-2007, 02:40 PM	#172
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: When Free Isn't Cheap Enough... Those look like 1/2 ton overload helper springs (1/2 springs). Maybe just axles and front cross member swap. Does the build sheet from the seat match the cab? I would ask what the title and registration say but I suspect they are both missing. BTW...that is just surface rust...LOL! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

11-03-2007, 02:47 PM	#173
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: When Free Isn't Cheap Enough... Build sheet seams to match the helper spring, but the VIN is different? The seat is out of another truck, the suspension was added to the truck, that the only way, unless someone swapped the VIN plate (but it looks as original as the truck?) Get a title and get going, these things aren't going to keep it from being a work truck!!

11-03-2007, 03:00 PM	#174
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,220	Re: When Free Isn't Cheap Enough... check the frame vin, front drivers side frame rail, to cab and build sheet. __________________ Even the nicest dodge-chrysler is only 2years away from being parked outside of Section 8 housing.

11-03-2007, 03:05 PM	#175
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: When Free Isn't Cheap Enough... Mike, You might try grabbing the vin off the frame on the top rail of the drivers side, just aft of the power steering pump. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.