project 62 - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jason65 · 05-07-2009, 07:26 AM

I bet he has pics tucked away somewhere and won't share.

**scotts62** · 05-07-2009, 07:34 AM

Quote:

Originally Posted by jr's62

hey very nice lookin truck. where did you get the tilt glass front, and was it expensive. that would be great for my part of oklahoma with all the rain and road debri would really save fenders. was it hard to fit.

It actually fit really good, since where i got it from people say that stuff doesnt fit all that well have the time. Got it from Usbody.com and 6 years ago it was $1200, i think its gone up a bit since then. Problem is if you drive on dirt roads a bunch there are no inner fenders so if you have shiny stuff under the hood you will be cleaning it a lot more often.

**scotts62** · 05-07-2009, 07:35 AM

Quote:

Originally Posted by jason65

I bet he has pics tucked away somewhere and won't share.

Wish i did there dude, When i get finished up with the Chevelle ill bring back my plasma and welder back from the shop and hit the truck hard so i can try and trailer it to the meet.

1Bad62Pro/Street · 05-08-2009, 04:14 PM

Motor! I gosta know!
Whatcha plans for the brain? Lighting up the tires kinda horse power? Huffer? Tunnel Ram? Tha squeeze? Got some plans of my own on my power plant 350ci engine. . . Scheaming as I write. . . Tee hee!
Gotta tear her apart anyhow. . .
Might as well light up them Wide Hide Mickey's a time or two. Like breaking in a set of shoes. .

**scotts62** · 05-08-2009, 04:41 PM

Well the plan is as of right now is a 383 with fuel injection from a 87 corvette TPI. Or if i have the money by then i just want to do a 350 with a procharger, but we'll have to see how it goes. I already have the block machined and the crank for the 383 setup. I wana keep it cruisable so if any of the other guys on here have a meet like we are around here but its out of state, im goin!!

red7218 · 05-08-2009, 11:24 PM

Do you still have your original front wheel hubs? I could use them. Thanks Marshall

shifter62 · 05-08-2009, 11:40 PM

Nice looks like its coming together.. I have a 62 GMC I'm working on were did you get the motor monts?

joe231 · 05-08-2009, 11:48 PM

Quote:

Originally Posted by scotts62

Well the plan is as of right now is a 383 with fuel injection from a 87 corvette TPI. Or if i have the money by then i just want to do a 350 with a procharger, but we'll have to see how it goes. I already have the block machined and the crank for the 383 setup. I wana keep it cruisable so if any of the other guys on here have a meet like we are around here but its out of state, im goin!!

I vote the 350 with a blower....

Then you can give me the 383

Alan's Classic · 05-09-2009, 12:26 AM

Quote:

Originally Posted by joe231

I vote the 350 with a blower....

Then you can give me the 383

Gotta love the fine print.

**scotts62** · 05-09-2009, 09:23 AM

Quote:

Originally Posted by red7218

Do you still have your original front wheel hubs? I could use them. Thanks Marshall

Those were gone a long time ago.

Quote:

Originally Posted by shifter62

Nice looks like its coming together.. I have a 62 GMC I'm working on were did you get the motor monts?

Thanks! I got them from CPP.

Quote:

Originally Posted by Alan's Classic

Gotta love the fine print.

Yeah the fine print will screw you every time

We'll see when it comes time for the engine Joe

joe231 · 05-09-2009, 11:40 AM

*highperf4x4* · 05-09-2009, 08:10 PM

Quote:

Originally Posted by scotts62

We'll see when it comes time for the engine Joe

Hey, I washed my hands in the bathroom at the Spaghetti Warehouse and slung some of your rust all over the sink for you. Kinda like a stamp!

TimE · 05-09-2009, 09:39 PM

So, how's progress Scott?

**scotts62** · 05-09-2009, 09:47 PM

Going good Tim, got everything stripped off the frame and started welding it all up. Ill post up some pics tomorrow.

TimE · 05-09-2009, 10:01 PM

**scotts62** · 05-09-2009, 11:09 PM

Thanks to highperf4x4(Travis) and Joe for the help on taking the cab off

*highperf4x4* · 05-09-2009, 11:22 PM

Hey don't mention it. I like cab flippin, it's like cow tippin cept with a cab. You sneak up on it and knock it over on it's side!!!

**scotts62** · 05-10-2009, 04:28 AM

**scotts62** · 05-10-2009, 02:15 PM

Alright here are some pics of yesterdays progress. Thanks to Joe and Travis(highperf4x4) swinging by to help with the cab

Thanks guys!

Got it all stripped down to frame so i can finish welding it all up only to put what i have back together and make it to the Oklahoma meet

jr's62 · 05-10-2009, 02:21 PM

hey sorry for not knowing but what the heck is the thing on top of the motor, it at first looked like your headers until i saw another pic. is it for a high rise intake. i thought they were onepeice.
I LIKE IT

*highperf4x4* · 05-10-2009, 03:22 PM

Quote:

Originally Posted by jr's62

hey sorry for not knowing but what the heck is the thing on top of the motor, it at first looked like your headers until i saw another pic. is it for a high rise intake. i thought they were onepeice.
I LIKE IT

That is part of the telecsopic snorkel kit needed for underwater driving. Since the truck will used for river travel when he goes hunting to keep his scent/tracks hidden from the deer. That's why he changed the name from HungSoLow to "Bottom Feeder".

**scotts62** · 05-10-2009, 03:31 PM

Quote:

Originally Posted by highperf4x4

That is part of the telecsopic snorkel kit needed for underwater driving. Since the truck will used for river travel when he goes hunting to keep his scent/tracks hidden from the deer. That's why he changed the name from HungSoLow to "Bottom Feeder".

Jr's62= Its an intake TPI off of a corvette, The engine is just a mock up motor until it goes together then final time. I just took the top part of the intake off so we didnt knock it off when we too the cab off.

jr's62 · 05-10-2009, 03:58 PM

ok, well i still like it, and i really like the way the truck looks, i think it looks mean.

**scotts62** · 05-10-2009, 04:51 PM

Thanks!

If you go to my profile and then to my albume there is a pic of how the intake looks.

joe231 · 05-10-2009, 06:07 PM

don't thank me.....

til you see the bill

05-07-2009, 07:26 AM	#151
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: project 62 I bet he has pics tucked away somewhere and won't share.

05-08-2009, 04:14 PM	#154
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: project 62 Motor! I gosta know! Whatcha plans for the brain? Lighting up the tires kinda horse power? Huffer? Tunnel Ram? Tha squeeze? Got some plans of my own on my power plant 350ci engine. . . Scheaming as I write. . . Tee hee! Gotta tear her apart anyhow. . . Might as well light up them Wide Hide Mickey's a time or two. Like breaking in a set of shoes. . __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

05-08-2009, 04:41 PM	#155
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Well the plan is as of right now is a 383 with fuel injection from a 87 corvette TPI. Or if i have the money by then i just want to do a 350 with a procharger, but we'll have to see how it goes. I already have the block machined and the crank for the 383 setup. I wana keep it cruisable so if any of the other guys on here have a meet like we are around here but its out of state, im goin!! __________________ Scott 93 crew cab build Project 62

05-08-2009, 11:24 PM	#156
red7218 Registered User Join Date: May 2009 Location: Memphis TN Posts: 10	Re: project 62 Do you still have your original front wheel hubs? I could use them. Thanks Marshall

05-08-2009, 11:40 PM	#157
shifter62 Registered User Join Date: May 2009 Location: Vacaville CA Posts: 2	Re: project 62 Nice looks like its coming together.. I have a 62 GMC I'm working on were did you get the motor monts?

05-09-2009, 11:40 AM	#161
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: project 62 __________________ *CHEVY ONLY*

05-09-2009, 09:39 PM	#163
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: project 62 So, how's progress Scott? __________________ Just hopin' I live long enough to finish something!!!

05-09-2009, 09:47 PM	#164
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Going good Tim, got everything stripped off the frame and started welding it all up. Ill post up some pics tomorrow. __________________ Scott 93 crew cab build Project 62

05-09-2009, 10:01 PM	#165
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: project 62 __________________ Just hopin' I live long enough to finish something!!!

05-09-2009, 11:09 PM	#166
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Thanks to highperf4x4(Travis) and Joe for the help on taking the cab off __________________ Scott 93 crew cab build Project 62

05-09-2009, 11:22 PM	#167
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: project 62 Hey don't mention it. I like cab flippin, it's like cow tippin cept with a cab. You sneak up on it and knock it over on it's side!!!

05-10-2009, 04:28 AM	#168
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 __________________ Scott 93 crew cab build Project 62

05-10-2009, 02:15 PM	#169
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Alright here are some pics of yesterdays progress. Thanks to Joe and Travis(highperf4x4) swinging by to help with the cab Thanks guys! Got it all stripped down to frame so i can finish welding it all up only to put what i have back together and make it to the Oklahoma meet __________________ Scott 93 crew cab build Project 62

05-10-2009, 02:21 PM	#170
jr's62 Registered User Join Date: May 2009 Location: ada oklahoma Posts: 83	Re: project 62 hey sorry for not knowing but what the heck is the thing on top of the motor, it at first looked like your headers until i saw another pic. is it for a high rise intake. i thought they were onepeice. I LIKE IT Last edited by jr's62; 05-10-2009 at 02:23 PM.

05-10-2009, 03:58 PM	#173
jr's62 Registered User Join Date: May 2009 Location: ada oklahoma Posts: 83	Re: project 62 ok, well i still like it, and i really like the way the truck looks, i think it looks mean.



Register or Log In To remove these advertisements.

05-10-2009, 04:51 PM	#174
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: project 62 Thanks! If you go to my profile and then to my albume there is a pic of how the intake looks. __________________ Scott 93 crew cab build Project 62

05-10-2009, 06:07 PM	#175
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: project 62 don't thank me..... til you see the bill __________________ *CHEVY ONLY*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.