LS1 into a 73 cheyenne - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smokedat · 01-21-2010, 04:38 PM

few more pics.

smokedat · 01-21-2010, 05:31 PM

making this into a convertible

menace121978 · 01-21-2010, 05:38 PM

man... you got alot going on there!

STOCKISH · 01-22-2010, 12:33 AM

Thats what I was thinking. Lots of cool looking projects though.

qu1cks1lver56 · 01-22-2010, 01:52 AM

Quote:

Originally Posted by smokedat

Thanks, Im also an aspiring photographer and I use the Nikon D700 with
various lenses, most of thes pics were used shooting with a 2.8f 24-70mm.

This is my Flickr page check it out http://www.flickr.com/photos/barriosfoto/

JEALOUS!!!!
I want me a Nikon DSLR so bad.

smokedat · 01-22-2010, 03:58 AM

another pic of my fat gurl

Damien · 01-26-2010, 11:53 AM

That is a really nice picture and the truck should be extremely nice when it all comes together.

kvn1011 · 01-26-2010, 05:49 PM

The ultimate sleeper truck!
Before you lay the paint down, you gotta go out and cruise around!
with the truck looking plain jane, & the LS lurking beneath the hood!
U could beat the brakes off of most of the cars out there! LoL

Quote:

Originally Posted by smokedat

another pic of my fat gurl

smokedat · 01-27-2010, 01:44 AM

Quote:

Originally Posted by Damien

That is a really nice picture and the truck should be extremely nice when it all comes together.

Thanks Bro

smokedat · 01-27-2010, 01:50 AM

Quote:

Originally Posted by kvn1011

The ultimate sleeper truck!
Before you lay the paint down, you gotta go out and cruise around!
with the truck looking plain jane, & the LS lurking beneath the hood!
U could beat the brakes off of most of the cars out there! LoL

Agree but the unmistakenly sound of the cam will put me on blast, but I could deny such allegations and say it a spruced-up carb LOL

kvn1011 · 01-27-2010, 11:32 PM

Quote:

Originally Posted by smokedat

agree but the unmistakenly sound of the cam will put me on blast, but i could deny such allegations and say it a spruced-up carb lol

lol

smokedat · 01-28-2010, 02:27 PM

So i finally got my ignition wires there Taylor 409 10.4mm with a 135* boot

smokedat · 01-28-2010, 02:35 PM

here a pic of the complete set up

menace121978 · 01-28-2010, 03:02 PM

that is SICK! looks really good man!

STOCKISH · 01-28-2010, 04:10 PM

Couldnt agree more with Dennis. That is one awesome looking engine. Hope you will take all the pretty stuff off before trying to set it in the chassis to avoid any damage.

79gmc5.3 · 01-28-2010, 07:16 PM

All I can say is....................... WOW that is one beautiful setup. Those covers give it a classic look! Keep the pics coming. Nice progress.

smokedat · 02-01-2010, 01:16 PM

Quote:

Originally Posted by 1972SuperCheyenne

Couldnt agree more with Dennis. That is one awesome looking engine. Hope you will take all the pretty stuff off before trying to set it in the chassis to avoid any damage.

yeah that would be a good idea

smokedat · 02-01-2010, 04:14 PM

This is my fuel line set up. I decided to go with a single line filter regulator. I used Jegs braided 6 AN female 2ft. ready made hose. 3/8 and 5/16 tubing with Swagelock compression fittings 2- 3/8 to 6AN males and 2- 5/16 to 6 AN males. At the regulator I used 1- 3/8 and 1- 5/16 Swagelock compresion to compresion fittings and a GM O-ring X 6AN.

smokedat · 02-15-2010, 02:13 PM

No progress on my truck since I been busy finishing off my uncles truck. Cab fire wall and chassi have been painted. We used PPG Atomic Orange (code 83), and PPG 2021 clear. A high gloss on the chassi. We were goin to drop in an LS1 this Sunday but the paint was still sticky, will try again this week end.

smokedat · 02-15-2010, 02:15 PM

few more

STOCKISH · 02-15-2010, 02:22 PM

Looking good. That color looks cool.

glock35ipsc · 02-15-2010, 02:51 PM

I love that color! This is what I was going to paint my 68. I even had a little design figured out that I was going to have airbrushed on a lower corner of the tailgate...... an orange that was split open at the top, with a mushroom cloud coming out of it.

Ger · 02-15-2010, 03:00 PM

Man that egine looks sick, you guys give to many ideas and my bank keeps laughing at me, lol. Keep it up...

68 TT · 02-15-2010, 03:16 PM

Quote:

Originally Posted by smokedat

menace121978 the radiator was 700 shipped 645 with trans cooler w/o 595, as for the clean up I used regular break cleaner works good.

Do you have a part number for that Griffin radiator?

3r!c84 · 02-15-2010, 04:57 PM

what paint did you use on the frame?

01-21-2010, 04:38 PM	#151
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne few more pics. Attached Images

01-21-2010, 05:31 PM	#152
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne making this into a convertible Attached Images

01-21-2010, 05:38 PM	#153
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: LS1 into a 73 cheyenne man... you got alot going on there! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

01-22-2010, 12:33 AM	#154
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: LS1 into a 73 cheyenne Thats what I was thinking. Lots of cool looking projects though. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-22-2010, 03:58 AM	#156
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne another pic of my fat gurl Attached Images Last edited by smokedat; 01-22-2010 at 01:38 PM.

01-26-2010, 11:53 AM	#157
Damien Registered User Join Date: Mar 2007 Location: Farmington, MN Posts: 928	Re: LS1 into a 73 cheyenne That is a really nice picture and the truck should be extremely nice when it all comes together. __________________ I can still count my vehicles on two... wait three hands.

01-28-2010, 02:27 PM	#162
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne So i finally got my ignition wires there Taylor 409 10.4mm with a 135* boot Attached Images

01-28-2010, 02:35 PM	#163
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne here a pic of the complete set up Attached Images

01-28-2010, 03:02 PM	#164
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: LS1 into a 73 cheyenne that is SICK! looks really good man! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

01-28-2010, 04:10 PM	#165
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: LS1 into a 73 cheyenne Couldnt agree more with Dennis. That is one awesome looking engine. Hope you will take all the pretty stuff off before trying to set it in the chassis to avoid any damage. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-28-2010, 07:16 PM	#166
79gmc5.3 6.0L power......... Join Date: Dec 2009 Location: Acworth GA Posts: 292	Re: LS1 into a 73 cheyenne All I can say is....................... WOW that is one beautiful setup. Those covers give it a classic look! Keep the pics coming. Nice progress. __________________ What ever the mind of man can conceive......... he can achieve! My built thread http://67-72chevytrucks.com/vboard/s...d.php?t=375914 1979 GMC Sierra 6.0 L 4L60E 1995 Mustang GT 347

02-01-2010, 04:14 PM	#168
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne This is my fuel line set up. I decided to go with a single line filter regulator. I used Jegs braided 6 AN female 2ft. ready made hose. 3/8 and 5/16 tubing with Swagelock compression fittings 2- 3/8 to 6AN males and 2- 5/16 to 6 AN males. At the regulator I used 1- 3/8 and 1- 5/16 Swagelock compresion to compresion fittings and a GM O-ring X 6AN. Attached Images Last edited by smokedat; 02-01-2010 at 04:51 PM.

02-15-2010, 02:13 PM	#169
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne No progress on my truck since I been busy finishing off my uncles truck. Cab fire wall and chassi have been painted. We used PPG Atomic Orange (code 83), and PPG 2021 clear. A high gloss on the chassi. We were goin to drop in an LS1 this Sunday but the paint was still sticky, will try again this week end. Attached Images

02-15-2010, 02:15 PM	#170
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne few more Attached Images

02-15-2010, 02:22 PM	#171
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: LS1 into a 73 cheyenne Looking good. That color looks cool. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.



Register or Log In To remove these advertisements.

02-15-2010, 02:51 PM	#172
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: LS1 into a 73 cheyenne I love that color! This is what I was going to paint my 68. I even had a little design figured out that I was going to have airbrushed on a lower corner of the tailgate...... an orange that was split open at the top, with a mushroom cloud coming out of it. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

02-15-2010, 03:00 PM	#173
Ger Registered User Join Date: Feb 2010 Location: Red Deer Alberta Posts: 140	Re: LS1 into a 73 cheyenne Man that egine looks sick, you guys give to many ideas and my bank keeps laughing at me, lol. Keep it up...

02-15-2010, 04:57 PM	#175
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: LS1 into a 73 cheyenne what paint did you use on the frame? __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.