DJ JR's Build Thread - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 07-15-2012, 08:49 PM

Thanks Rob.

DJ JR. · 07-28-2012, 11:02 PM

My truck taking its first breath of life -...

SHE'S ALIVE!!!!!

djracer · 07-29-2012, 12:48 AM

Now we got to get to work on rewiring the truck and putting the rest of the truck back together. We just did some temporary wiring to get the truck going today. Special Thanks go out to Mark Causey and Jerry Carlisle for helping today. I bought a used all aluminum radiator this week I just have to have it cleaned up before installing it. We are selling Cade's XR80 to buy more parts.

aggie91 · 07-29-2012, 05:14 PM

Looking good. When does Cade turn 16? I have only 11 more months on Korbin's truck to get it done by then. You are A LOT further along then we are!!!
Posted via Mobile Device

djracer · 07-29-2012, 05:23 PM

Cade will be 15 the end of august. I am gonna start letting him drive his truck at the track as soon as it's finished.

djracer · 08-29-2012, 07:41 AM

We have made a good bit of progress but I have been too busy to stop and post pics. Here are some pics of the shifter mount I designed and we fabbed. My Chassis guy bent the tubing and my neighbor tig welded the mounting straps for the shifter itself. Mark Causey mig welded the other mounting brackets. I ordered a polished and anodized cover for the shifter. I hope it makes it by the weekend.

djracer · 08-29-2012, 07:44 AM

The seat for the truck is a second row suburban seat and the bottom flips forward so I didn't want to mount the shifter from the floor.

We got the exhaust done last Saturday. 3.5 inch manual cut outs and 3 in magnaflows turned out under the steps of the bed.

1Bad62Pro/Street · 08-29-2012, 07:47 AM

Quote:

Originally Posted by DJ JR.

My truck taking its first breath of life - YouTube
SHE'S ALIVE!!!!!

She sounds healthy!

djracer · 08-29-2012, 08:07 AM

I hope to get to flog her this weekend!

made2drag · 08-30-2012, 09:09 AM

dude that shifter mounting is the bomb...very creative and well designed...

**Hart_Rod** · 08-30-2012, 09:34 AM

Quote:

Originally Posted by djracer

We have made a good bit of progress but I have been too busy to stop and post pics. Here are some pics of the shifter mount I designed and we fabbed. My Chassis guy bent the tubing and my neighbor tig welded the mounting straps for the shifter itself. Mark Causey mig welded the other mounting brackets. I ordered a polished and anodized cover for the shifter. I hope it makes it by the weekend.

Nice!!! I bet his girlfriend is going to love the location....

.

FRENCHBLUE72 · 08-30-2012, 08:24 PM

Truck sounds great need more video...

djracer · 08-30-2012, 10:49 PM

Maybe some tire smoking video soon! It's amazing how much quieter it is with the cut outs and 3 inch magnaflows.

redsled87 · 08-31-2012, 11:36 AM

Agreed. It sounds good. How much cam is in it? Its a 468 right? My 496 sounds good with headers open too.

djracer · 09-02-2012, 08:12 AM

It has the edelbrock Performer RPM Cam in it. I think the motor is standard but it might be 30 over. I have been working on the old motor for several years. I bought the motor complete but needing assembly. I upgraded to a closed chamber Dome Piston and 781 oval Ports. I just couldn't do the peanut ports and Flat tops it came with.

redsled87 · 09-02-2012, 11:11 AM

Quote:

Originally Posted by djracer

It has the edelbrock Performer RPM Cam in it. I think the motor is standard but it might be 30 over. I have been working on the old motor for several years. I bought the motor complete but needing assembly. I upgraded to a closed chamber Dome Piston and 781 oval Ports. I just couldn't do the peanut ports and Flat tops it came with.

Nice! SHould make som good power. I've got mini domes and 781's on my 496 also. Do they have any work done to them?

redsled87 · 09-02-2012, 11:12 AM

Quote:

Originally Posted by djracer

It has the edelbrock Performer RPM Cam in it. I think the motor is standard but it might be 30 over. I have been working on the old motor for several years. I bought the motor complete but needing assembly. I upgraded to a closed chamber Dome Piston and 781 oval Ports. I just couldn't do the peanut ports and Flat tops it came with.

Nice! Should make some good power. I've got mini domes and 781's on my 496 also. Do they have any work done to them?

redsled87 · 09-02-2012, 11:23 AM

Opps! Double post. Sorry

djracer · 09-02-2012, 03:26 PM

Not much done to them. I don't want to get too crazy for a 15yr old.
The sexy shifter cover just came in the mail. Pics Later.

djracer · 09-03-2012, 11:36 PM

A few pictures.

bigboybodry · 09-04-2012, 02:53 PM

I want one! That's awesome the seat will still slide forward and everything?
Are ya'll going to the coast this year Kevin?

djracer · 09-05-2012, 12:09 AM

I am planning on bringing this truck and a 59 Chevy truck. I am gonna borrow a 2 car trailer and tow them down and then Cruise.

bigboybodry · 09-05-2012, 03:21 PM

Quote:

Originally Posted by djracer

I am planning on bringing this truck and a 59 Chevy truck. I am gonna borrow a 2 car trailer and tow them down and then Cruise.

we need to hook up, I am going down the last weekend this year.

djracer · 09-06-2012, 12:00 AM

Sounds like a plan. Pm me your digits.

scatesracing · 09-11-2012, 11:08 PM

Quote:

Originally Posted by djracer

Sexy new adjustable anti roll parts.

There are a little on the large size and we will have to drill the plates for the frame side!

Kevin ,Where did you order your bar and brackets from

07-15-2012, 08:49 PM	#151
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Thanks Rob. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-29-2012, 12:48 AM	#153
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Now we got to get to work on rewiring the truck and putting the rest of the truck back together. We just did some temporary wiring to get the truck going today. Special Thanks go out to Mark Causey and Jerry Carlisle for helping today. I bought a used all aluminum radiator this week I just have to have it cleaned up before installing it. We are selling Cade's XR80 to buy more parts. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-29-2012, 05:14 PM	#154
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: DJ JR's Build Thread Looking good. When does Cade turn 16? I have only 11 more months on Korbin's truck to get it done by then. You are A LOT further along then we are!!! Posted via Mobile Device __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

07-29-2012, 05:23 PM	#155
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Cade will be 15 the end of august. I am gonna start letting him drive his truck at the track as soon as it's finished. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-29-2012, 07:41 AM	#156
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread We have made a good bit of progress but I have been too busy to stop and post pics. Here are some pics of the shifter mount I designed and we fabbed. My Chassis guy bent the tubing and my neighbor tig welded the mounting straps for the shifter itself. Mark Causey mig welded the other mounting brackets. I ordered a polished and anodized cover for the shifter. I hope it makes it by the weekend. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-29-2012, 07:44 AM	#157
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread The seat for the truck is a second row suburban seat and the bottom flips forward so I didn't want to mount the shifter from the floor. We got the exhaust done last Saturday. 3.5 inch manual cut outs and 3 in magnaflows turned out under the steps of the bed. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-29-2012, 08:07 AM	#159
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread I hope to get to flog her this weekend! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-30-2012, 09:09 AM	#160
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: DJ JR's Build Thread dude that shifter mounting is the bomb...very creative and well designed... __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

08-30-2012, 08:24 PM	#162
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: DJ JR's Build Thread Truck sounds great need more video... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-30-2012, 10:49 PM	#163
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Maybe some tire smoking video soon! It's amazing how much quieter it is with the cut outs and 3 inch magnaflows. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-31-2012, 11:36 AM	#164
redsled87 Registered User Join Date: Dec 2011 Location: Lanc Co PA Posts: 226	Re: DJ JR's Build Thread Agreed. It sounds good. How much cam is in it? Its a 468 right? My 496 sounds good with headers open too. __________________ 1987 R10 Pump Gas 496/TH375 Best 1/4 pass to date 60' 1.49 1/4 10.93 MPH 120

09-02-2012, 08:12 AM	#165
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread It has the edelbrock Performer RPM Cam in it. I think the motor is standard but it might be 30 over. I have been working on the old motor for several years. I bought the motor complete but needing assembly. I upgraded to a closed chamber Dome Piston and 781 oval Ports. I just couldn't do the peanut ports and Flat tops it came with. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-02-2012, 11:23 AM	#168
redsled87 Registered User Join Date: Dec 2011 Location: Lanc Co PA Posts: 226	Re: DJ JR's Build Thread Opps! Double post. Sorry __________________ 1987 R10 Pump Gas 496/TH375 Best 1/4 pass to date 60' 1.49 1/4 10.93 MPH 120

09-02-2012, 03:26 PM	#169
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Not much done to them. I don't want to get too crazy for a 15yr old. The sexy shifter cover just came in the mail. Pics Later. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-03-2012, 11:36 PM	#170
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread A few pictures. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

09-04-2012, 02:53 PM	#171
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: DJ JR's Build Thread I want one! That's awesome the seat will still slide forward and everything? Are ya'll going to the coast this year Kevin? __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

09-05-2012, 12:09 AM	#172
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread I am planning on bringing this truck and a 59 Chevy truck. I am gonna borrow a 2 car trailer and tow them down and then Cruise. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-06-2012, 12:00 AM	#174
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Sounds like a plan. Pm me your digits. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.