NY Parting a '72 Blazer 4x4

[Ironhorse]

I'm up for that. Man, you gotta' love this board. Will PM you my address and a request for your mailing address. Will get the brochures shipped out by tomorrow afternoon latest.

[sam302psu]

Originally Posted by ORANGBLAZ

I removed one side today and noticed that the dust shields are MIA. They were spot welded to the caliper brackets, but have rusted off. Do you still want them?

Yes I would still be interested. What were you thinking on the price?

[ORANGBLAZ]

Originally Posted by sam302psu

Yes I would still be interested. What were you thinking on the price?

How's $75 plus shipping? That is for the knuckles, caliper brackets, spindles, and hub assemblies. You will still need calipers and rotors, and new ball joints and wheel bearings. I am not sure if the axles are the same, maybe someone on the forum can give some input.

[sam302psu]

Originally Posted by ORANGBLAZ

How's $75 plus shipping? That is for the knuckles, caliper brackets, spindles, and hub assemblies. You will still need calipers and rotors, and new ball joints and wheel bearings. I am not sure if the axles are the same, maybe someone on the forum can give some input.

I would take it all for that. PM me total payment info. Shipping is to 17201.

You mentioned before that you broke one of the double walls. How bad was it? I might be interested if it's not too bad. I would be interested in the other one you have if it doesn't have any sag in it.

[ORANGBLAZ]

Originally Posted by sam302psu

I would take it all for that. PM me total payment info. Shipping is to 17201.

You mentioned before that you broke one of the double walls. How bad was it? I might be interested if it's not too bad. I would be interested in the other one you have if it doesn't have any sag in it.

Will do.
It is a single wall. A section beneath the left side window broke off. The glass was busted out, so there was nothing to support it. The lower rails seem to be weak, almost crumbling or delaminating. Never seen this before, and don't know what may have caused it. Top may be better used for patches.

[themb2g]

does it happen to have a dash panel with AC? if so can you send me some pics.

[ORANGBLAZ]

Originally Posted by themb2g

does it happen to have a dash panel with AC? if so can you send me some pics.

Sorry-no AC. I will be checking out some more parts trucks soon, and if I find one I will let you know.

[themb2g]

Originally Posted by ORANGBLAZ

Sorry-no AC. I will be checking out some more parts trucks soon, and if I find one I will let you know.

Thanks!

[capev86]

or the Yankees over the Red Sox

bite your tongue...that's blasphemy, that is. imagine if ancient people had wanted Goliath to win instead of David!

actually, there are quite a few "Skankees" fans up here in Maine (there shouldn't be any north of CT unless they are transplants IMO), considering the proxity to Boston vs NYC. the Red Sox are more yankee than the Yankees. but to each his own. the rivalry will go on long after we are all dead!

as for the Patriots, they have had a pretty good track record the last few years, so I guess I can forgive you guys for grumbling!

[1tuff71]

got any hardware for a rear hatch. looking for the pieces that attach to the handle.

[ORANGBLAZ]

Originally Posted by 1tuff71

got any hardware for a rear hatch. looking for the pieces that attach to the handle.

I do have a couple of busted hatches I can part out. I will check them in the next few days to see what's good.

[sam302psu]

Originally Posted by ORANGBLAZ

Will do.
It is a single wall. A section beneath the left side window broke off. The glass was busted out, so there was nothing to support it. The lower rails seem to be weak, almost crumbling or delaminating. Never seen this before, and don't know what may have caused it. Top may be better used for patches.

Ok thanks. I'll pass on the top. I will take the disc brake parts though. Thanks again. Sorry for the delay btw I was out of town for work.

[ORANGBLAZ]

Originally Posted by 1tuff71

got any hardware for a rear hatch. looking for the pieces that attach to the handle.

I have six hatches, and all the hardware is rusty junk.

[Cheyennekid]

Did the transfer case have the original shifter and knob on it?
Posted via Mobile Device

[ORANGBLAZ]

Originally Posted by Cheyennekid

Did the transfer case have the original shifter and knob on it?
Posted via Mobile Device

No, but I do have others.

[Cheyennekid]

How much for a complete shifter for a 72 k5 and could you send me some pics to mendezzef@yahoo.com thanks!
Posted via Mobile Device

[badpeanut]

Is the rear driveshaft good?

If so, what transmission did this Blazer have?

[ORANGBLAZ]

Originally Posted by badpeanut

Is the rear driveshaft good?

If so, what transmission did this Blazer have?

This blazer had a 4-spd. I do have a couple of rear driveshafts $50 shipped in the conus.

[ORANGBLAZ]

Sorry for not getting pics up, guys - been crazy busy. I will post pics tomorrow. Thanks-Chuck

[badpeanut]

Originally Posted by ORANGBLAZ

This blazer had a 4-spd. I do have a couple of rear driveshafts $50 shipped in the conus.

Is it '71-'72 (necessary according to the attached chart)? Is the slip joint tight?

[ORANGBLAZ]

Yes, it's from a '72. Slip joint seems pretty tight.

[themb2g]

pricing on front passenger inner fender well? is it in good shape?

[Cheyennekid]

How much for the transfer case shifter complete with the knob shipped to 90280
Posted via Mobile Device

[ORANGBLAZ]

Originally Posted by themb2g

pricing on front passenger inner fender well? is it in good shape?

Sorry, inner fenders suffered from NY rust.

[badpeanut]

I'll take the '72 Blazer rear driveshaft for $50 shipped. What is your prefered payment method (do you take PayPal)?