KS Pre Valentines 2014 67-72 trucks parts SPECIAL

[1971 cheburban]

I talked to you about motor mounts awhile ago, I need small block mounts, and a single crank pulley, they're tough to find around here in ohio. It's for a 71 chevy c10, short water pump, I bought a 8 inch damper but I think they will all bolt up. And also how much for a washer bottle, no bracket just the bottle and lid, thanks

[1971 cheburban]

Also how much do you get out of a radio, do you know if they work?

[Justintime67]

Originally Posted by teeitup

Justintime67, steering wheel is still for sale $30 plus shipping, it has a bend in it, I tried to get pics but its hard to see. I think it can be straightened when mounted, horn guts come with it. Thanks Randy

How much to ship to 92392??

[teeitup]

UP Grade, cargo light housing and lens and switch and 4 of the plastic deals $20 plus shipping, the best housing I have does have some light pitting on it

67carry-all, I will look

BKSS67, $13 shipped for all that

Clatterville, $20 plus shipping

JIMH2828, the knobs I have are for 4 speeds, I will look on hinge for support bracket and go through your other list and get pics

jimer1964, Thanks, I will look and see condition on door edge guards, most have dings

Daren, wish I could of helped

Trevor, sounds good its yours

1971 cheburban, I have one set of V8 mounts left $15, washer bottle and lid $5, plus shipping, the radio I do not know if it works, I only have 67 knobs for it

Justintime67, $50 shipped

Thanks Randy

[Clatterville trolley]

Originally Posted by teeitup

Clatterville, $20 plus shipping
Thanks Randy

Randy - I will take it and you can put it with the cab roof we are dealing on in your other thread. I will pay for both together and pick up together when I can get that direction, so no shipping cost - only gasoline to come to Meridian

Thanks for everything, Jay

[NavyChief]

How much for a heater control assembly?

Nate

[teeitup]

Jay sounds good

Nate, arms are all good but the 2 lower rivets are pulled out on back, it would need jb welded or something, $29 shipped for it

Thanks Randy

[gs-xnr]

71-72 gas pedal assembly? Thank you. Harvey

[teeitup]

Harvey, I have one setup but the plastic pedal is missing stud and spring and no throttle cable of carb bracket $28 shipped to US addy. Thanks Randy

[gs-xnr]

Hi Randy,
I will take it. Going to 98226, Bellingham, WA. Paypal address? If so I will send $$ this evening. Just off to work now.
Thanks, Harvey

Originally Posted by teeitup

Harvey, I have one setup but the plastic pedal is missing stud and spring and no throttle cable of carb bracket $28 shipped to US addy. Thanks Randy

[C20-67_N_MO]

Originally Posted by teeitup

As you can see I have quite a few parts. All are for sale all are 42 years old or older. So they are used parts. Ask questions in thread. I ship USPS or Fed Ex, and charge what they charge me. I take pay pal with fees or money orders or cash. Thanks Randy

5 lug disc brake frontend are $100

I have not read all the replies but if you still have this5 lug disc brake system for $100 please tell me what all is included.

Thank you.

[teeitup]

Harvey I will post a picture of it here in a while

C20-67, It comes complete I cut it right behind the shocks the brake lines were cut up by the pro valve

Thanks Randy

[BKSS67]

Originally Posted by teeitup

UP


BKSS67, $13 shipped for all that


Thanks Randy

Randy, I will take these. I didn't save your mailing address from last time, can you PM it to me.

Thanks!

Brian

[C20-67_N_MO]

Originally Posted by teeitup

Harvey I will post a picture of it here in a while

C20-67, It comes complete I cut it right behind the shocks the brake lines were cut up by the pro valve

Thanks Randy

Complete = Rotors, Calipers and brackets to bolt it all together? If so shipping to 63049.

Thanks,

Scott.

[UP GRADE]

[QUOTE=teeitup;6486565]UP Grade, cargo light housing and lens and switch and 4 of the plastic deals $20 plus shipping, the best housing I have does have some light pitting on


Ok how much for everything with out the chrome housing total shipped to 38109?

[teeitup]

Brian I will get pic and I can take pay pal

Scott I don't ship those sorry

Upgrade $14 shipped

[Justintime67]

I'll take the steering wheel for $50. pm me the info

[teeitup]

Justintime67, I will pm you Thanks

[teeitup]

I got a few pics before my camera died

[teeitup]

jack stuff

[teeitup]

gas pedal

[1971 cheburban]

I'll take the v-8 mounts for small block if you still have them, and the washer bottle, and also could you check for a crank pulley, single belt, short water pump style. If you would check for me I would really appreciate it. If you check let me know what the payment info is, thanks a lot

[teeitup]

I know I don't have a pulley sorry. I'll try to get a quote asap on other parts, Thanks Randy

[teeitup]

Jimer1964, drivers side has a couple small dings, pass looks good $10 plus shipping

[teeitup]

JimH2828, no 4x4 linkage or dipstick tubes
Here is what I have in AC boxes, it has some small rust on back most do $40 for it