2 for 1 Part II... - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy_mud_truck · 07-21-2015, 09:50 AM

What was in the box joy global make a lot of mining equipment

aggie91 · 07-22-2015, 09:41 AM

Quote:

Originally Posted by Chevy_mud_truck

What was in the box joy global make a lot of mining equipment

I had to go back and look as to what "box" you where referring too. The plywood came from a box that had some of the gears we machine in house for the wheel driver gear box for the large wheel loaders we build in Longview.

Chevy_mud_truck · 07-22-2015, 09:47 AM

I just about got fired over one of the plywood box with joy on the side of it for ripping the lid off one the had a VFD for a miner thought it was funny seeing someone cutting the up

SCOTI · 07-21-2015, 04:08 PM

Quote:

Originally Posted by aggie91

Figure I will post a quick update here.

Most of the vibration I had is from bad pinion angle. Got that fixed and there is still a small bit, so I had the rear wheels rebalanced. Turns out one of them is ever so slightly bent that you can see it when it was on the balancer.

Anyway, drove it quite a few times to and from work, it turned out nice. Very comfortable.

For Korbin's 18th birthday, I gave this truck to him since this is really what he wanted for a driver. Like Sunburn, but just not as nice. He has not really done anything with it except drive it and had to replace the master cylinder. He is having a 12 bolt rear built up with 4.10 gears and an Eaton Limited slip so once that is in, he will have the exact drivetrain that was in Sunburn before the accident. The only things different from the chassis set up on Sunburn to this one will be the Corvette brakes, The No Limit rack and pinion, the PBFab Forward Arms, and the Addco Sway bar.

He is planning to set up the AC and get it working hopefully over the next month or so. I will see if I can get him to post up on here as he puts his touches on White Trash.

Glad ownership was passed on to someone we know. Tell him I said to be careful.....

aggie91 · 07-22-2015, 09:45 AM

Quote:

Originally Posted by GAc10boy

Interior looks great after the refresh! Glad Korbin is liking the truck.

Thanks! I wish I would have kept it for myself, but I made the right choice...

Quote:

Originally Posted by SCOTI

Glad ownership was passed on to someone we know. Tell him I said to be careful.....

I will let him know. He has been enjoying it and taking good care of it.

He thinks he figured out the speedo problem and I think he just maybe right. Seems my memory was a bit off as to what gears the old rear had from the original blue truck. We have not confirmed, but we will once he swaps in the 12-bolt rear...

Hankster · 07-25-2015, 03:01 PM

Quote:

Originally Posted by SCOTI

Glad ownership was passed on to someone we know. Tell him I said to be careful.....

Agreed! PLease let him know we would like to see him posting on here again!

Liltroy · 07-21-2015, 02:36 PM

Turned out very nice! I can't wait to get my swap finished so I can start on my interior/exterior.

**GAc10boy** · 07-21-2015, 07:36 PM

Interior looks great after the refresh! Glad Korbin is liking the truck.

aggie91 · 07-29-2015, 02:08 PM

Korbin is in the process of putting in the 12 bolt with the 4:10 gears today. He pulled the cover off the 10 bolt to check the gears, it had 2.73's in it when I thought it had 3.73's. That finally answers the question as to why the speedo was so off.

He had taken it to the drag strip over in Gillam, LA. It was a dog off the line but went thru the traps at 95 mph. He also said it was happiest on the highway at about 90...The 2.73's explain a lot on why it was a dog off the line...

I think he is going to want to switch to 3.73's once he starts going back and forth to Kilgore for classes in the fall. I have a set so its just getting them set up in the rear end to do the swap. We will see what he decides to do...

Hankster · 08-02-2015, 02:07 PM

Yeah the 2.73 explains it all..

made2drag · 08-16-2015, 05:00 PM

nice...is there paint in the future.....red???

aggie91 · 08-18-2015, 10:11 AM

No paint anytime in the next 5 years. He likes in the way it is.

He needs to concentrate on college right now.

slammed427 · 10-21-2015, 03:18 PM

This is a great truck and thread. That truck should last a good long time. Congrats.

aggie91 · 10-21-2015, 04:54 PM

Korbin has been complaining about a wiggle/vibration driving down the highway. Spent some time helping him figure it out last night.

Found the problem. The 12 bolt he just swapped in with the 4:10 gears has a bent right side axle. It is bent at the flange. We are headed to the junk yard this weekend to find a used replacement till he can afford a set of Moser axles.

He came home with this on the back of White Trash the other night:

What do you guys think?

Blessed66 · 12-15-2015, 09:22 PM

Quote:

Originally Posted by aggie91

He came home with this on the back of White Trash the other night:

What do you guys think?

Got the chance to see this truck in person recently, it's sharp. Y'all did good work. And Korbin is a pretty bright kid, he'll take good care of this truck, I'm sure.

Cheers.

SCOTI · 12-15-2015, 10:22 PM

Quote:

Originally Posted by Blessed66

Got the chance to see this truck in person recently, it's sharp. Y'all did good work. And Korbin is a pretty bright kid, he'll take good care of this truck, I'm sure.

Cheers.

A very nice young gun.

stersam · 10-21-2015, 04:56 PM

Great looking truck

**GAc10boy** · 10-21-2015, 06:22 PM

Dig it either way!

tinydb84 · 10-21-2015, 07:58 PM

Hahaha that's cool. Young kid with that makes me think he is trying to get laid in it.

stersam · 10-21-2015, 08:00 PM

I have a canopy on my truck for camping.

Low Elco · 10-21-2015, 08:34 PM

Stabbin' Cabin!

slammed427 · 10-22-2015, 10:55 AM

Looks good. The novelty of it might wear off though, at least it did with me.

68Timber · 10-22-2015, 11:01 AM

That's funny, I like it. It looks like its from the 70's so I'm guessing it was free or cheap, now he has dry storage when he wants or needs it.

aggie91 · 10-22-2015, 05:26 PM

some of the comments are funny. His girlfriend won't even ride in the truck...lol

He got it real cheap.

Hankster · 11-01-2015, 04:47 PM

I like it! I have been wanting one for my truck.

07-21-2015, 09:50 AM	#1
Chevy_mud_truck Registered User Join Date: Feb 2015 Location: Lester West Virginia Posts: 244	Re: 2 for 1 Part II... What was in the box joy global make a lot of mining equipment

07-22-2015, 09:47 AM	#3
Chevy_mud_truck Registered User Join Date: Feb 2015 Location: Lester West Virginia Posts: 244	Re: 2 for 1 Part II... I just about got fired over one of the plywood box with joy on the side of it for ripping the lid off one the had a VFD for a miner thought it was funny seeing someone cutting the up

07-21-2015, 02:36 PM	#7
Liltroy Registered User Join Date: Sep 2014 Location: Knoxville,Tn Posts: 506	Re: 2 for 1 Part II... Turned out very nice! I can't wait to get my swap finished so I can start on my interior/exterior. __________________ 74 Stepside"Steppin Wolf":78mm Turbo LQ4/4L80e,BTR stage 3 Truck cam,3.73 12 bolt with Detroit True-Trac Project Steppin Wolf Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=670303 My Youtube channel "Bad Luck Garage" https://www.youtube.com/channel/UCRP...XkeEPCu_HmRfuw

07-21-2015, 07:36 PM	#8
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	Re: 2 for 1 Part II... Interior looks great after the refresh! Glad Korbin is liking the truck. __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build

07-29-2015, 02:08 PM	#9
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 2 for 1 Part II... Korbin is in the process of putting in the 12 bolt with the 4:10 gears today. He pulled the cover off the 10 bolt to check the gears, it had 2.73's in it when I thought it had 3.73's. That finally answers the question as to why the speedo was so off. He had taken it to the drag strip over in Gillam, LA. It was a dog off the line but went thru the traps at 95 mph. He also said it was happiest on the highway at about 90...The 2.73's explain a lot on why it was a dog off the line... I think he is going to want to switch to 3.73's once he starts going back and forth to Kilgore for classes in the fall. I have a set so its just getting them set up in the rear end to do the swap. We will see what he decides to do... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

08-02-2015, 02:07 PM	#10
Hankster Registered User Join Date: Jan 2013 Location: Nacogdoches, Texas Posts: 895	Re: 2 for 1 Part II... Yeah the 2.73 explains it all.. __________________ Current Build 89 s10 ecsb 2wd 4.3/700r4 50k OG Miles Instagram- shaggin_s10 '86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD

08-16-2015, 05:00 PM	#11
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: 2 for 1 Part II... nice...is there paint in the future.....red??? __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

08-18-2015, 10:11 AM	#12
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 2 for 1 Part II... No paint anytime in the next 5 years. He likes in the way it is. He needs to concentrate on college right now. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

10-21-2015, 03:18 PM	#13
slammed427 Registered User Join Date: Dec 2008 Location: Tempe, Az Posts: 325	Re: 2 for 1 Part II... This is a great truck and thread. That truck should last a good long time. Congrats. __________________ 74 C10 LWB 350/T5 Dropped on 20's Soon to be Bagged and Injected 84 C35 Crew Cab Dually. 454/400 Dropped a lot. Instagram: mmmdropp

10-21-2015, 04:54 PM	#14
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 2 for 1 Part II... Korbin has been complaining about a wiggle/vibration driving down the highway. Spent some time helping him figure it out last night. Found the problem. The 12 bolt he just swapped in with the 4:10 gears has a bent right side axle. It is bent at the flange. We are headed to the junk yard this weekend to find a used replacement till he can afford a set of Moser axles. He came home with this on the back of White Trash the other night: What do you guys think? __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

10-21-2015, 04:56 PM	#17
stersam Registered User Join Date: Aug 2013 Location: aloha Posts: 44	Re: 2 for 1 Part II... Great looking truck

10-21-2015, 06:22 PM	#18
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	Re: 2 for 1 Part II... Dig it either way! __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build

10-21-2015, 07:58 PM	#19
tinydb84 Registered User Join Date: Jul 2009 Location: San Jose Ca Posts: 2,871	Re: 2 for 1 Part II... Hahaha that's cool. Young kid with that makes me think he is trying to get laid in it. __________________ David Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991 My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985 Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557 Instagram: myfabguy

10-21-2015, 08:00 PM	#20
stersam Registered User Join Date: Aug 2013 Location: aloha Posts: 44	Re: 2 for 1 Part II... I have a canopy on my truck for camping.

10-21-2015, 08:34 PM	#21
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: 2 for 1 Part II... Stabbin' Cabin! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!



Register or Log In To remove these advertisements.

10-22-2015, 10:55 AM	#22
slammed427 Registered User Join Date: Dec 2008 Location: Tempe, Az Posts: 325	Re: 2 for 1 Part II... Looks good. The novelty of it might wear off though, at least it did with me. __________________ 74 C10 LWB 350/T5 Dropped on 20's Soon to be Bagged and Injected 84 C35 Crew Cab Dually. 454/400 Dropped a lot. Instagram: mmmdropp

10-22-2015, 11:01 AM	#23
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: 2 for 1 Part II... That's funny, I like it. It looks like its from the 70's so I'm guessing it was free or cheap, now he has dry storage when he wants or needs it. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

10-22-2015, 05:26 PM	#24
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 2 for 1 Part II... some of the comments are funny. His girlfriend won't even ride in the truck...lol He got it real cheap. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

11-01-2015, 04:47 PM	#25
Hankster Registered User Join Date: Jan 2013 Location: Nacogdoches, Texas Posts: 895	Re: 2 for 1 Part II... I like it! I have been wanting one for my truck. __________________ Current Build 89 s10 ecsb 2wd 4.3/700r4 50k OG Miles Instagram- shaggin_s10 '86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.