![]() |
![]() |
#151 |
Senior Member
![]() Join Date: Nov 2010
Location: Lordstown, OH / Wentzville, MO
Posts: 870
|
Re: Blood Sweat and Tears.. 67 Build Thread
![]() When I read it I was exactly like this ![]() That's what they make beer for ![]() I hope it get better before it gets any worse. Merry Christmas to you and your family. |
![]() |
![]() |
![]() |
#152 | |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Quote:
It ran so good too. I have no idea how the heads didnt just fall off... I dont understand how they felt so tight when I took them out. Oh well... looks like that 383 stroker is coming sooner than planed and the truck will be a bit longer sitting in the garage...
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
|
![]() |
![]() |
![]() |
#153 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Ok we got the head bolts deal squared away and shes all together. Just need to get some pulleys and headers..
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#154 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Trying to get this big sway bar fitted and ran into a little road block.. clearance between the cradle cross member and the bushing mounts only give me like 2 inches, and there is still no weight from motor and trans on it so thats going to get tighter.... Not sure what to do here. Any ideas?
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#155 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Hope there is enough clearance once all the weight is on it, because its in there now...
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#156 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
I had Chad go ahead and do some renderings for me. I really do think Im going to see what I can do to build this C/28 he dreamed up... But as far as color and the Yenko style stripe goes, I think he nailed it... Not sure on wheels yet. These ones do look really cool...
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#157 | |
Registered User
Join Date: Mar 2011
Location: Kansas City, Missouri
Posts: 3,541
|
Re: Blood Sweat and Tears.. 67 Build Thread
Quote:
__________________
Scott |
|
![]() |
![]() |
![]() |
#158 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: Blood Sweat and Tears.. 67 Build Thread
Cool!
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
![]() |
![]() |
![]() |
#159 |
Registered User
Join Date: Oct 2014
Location: Kitchener, Ontario, Canada
Posts: 3,254
|
Re: Blood Sweat and Tears.. 67 Build Thread
Good to hear you got the motor figured out. So if the sway bar hits would it act like a bump stop?
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually |
![]() |
![]() |
![]() |
#160 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
If it hits its most likely to smash the brackets...
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#161 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Column is done, it was in real rough shape as far as paint goes. Pulled it all apart, cleaned it all up, and repainted. It was also a column shift automatic column. I got rid of the holes for the shifter and the gear selector thing...
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#162 |
Senior Member
![]() Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,028
|
Re: Blood Sweat and Tears.. 67 Build Thread
Nice work on the steering column. Looks good!
|
![]() |
![]() |
![]() |
#163 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
anybody know if this is upside down or correct? The instructions dont show a pic.. I googled it and have seen pics of it mounted with the arch up and also with it down..
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#164 |
Senior Member
![]() Join Date: Nov 2010
Location: Lordstown, OH / Wentzville, MO
Posts: 870
|
Re: Blood Sweat and Tears.. 67 Build Thread
I would guess that whatever makes the sway bar link the straightest up at ride height is the best way.
|
![]() |
![]() |
![]() |
#165 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
It doesnt look like it will hit the bed cross-member being this way, so I guess Ill go ahead and mount it like this and find out later how it works out.
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#166 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Thought about it and went this way instead...
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#167 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: Blood Sweat and Tears.. 67 Build Thread
I did the same thing, looked goofy and I flipped it. I think on one of Rob's threads there's a pic. I had to trim one of the brackets on the frame to get it in the right spot. Not much room under the bed floor.
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
![]() |
![]() |
![]() |
#168 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: Blood Sweat and Tears.. 67 Build Thread
Here's what I had to do...
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
![]() |
![]() |
![]() |
#169 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Mine are right against the bed mounts but I didn't have to cut them.. how long ago was it that you did yours? I wonder if they made changes to the bar? I just hope the bed clears this thing... or is that why you have yours farther forward?
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 Last edited by Possmguts; 01-16-2016 at 02:10 PM. |
![]() |
![]() |
![]() |
#170 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Drivers side door upper hinge area patch repair...
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#171 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
Well I'll be damned... it actually works... New metal around top hinge area. New top hinge and new pin and bushings in bottom hinge...
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#172 |
Senior Member
![]() Join Date: Nov 2010
Location: Lordstown, OH / Wentzville, MO
Posts: 870
|
Re: Blood Sweat and Tears.. 67 Build Thread
Awesome man. Wish I had the patience for that ****. If I screw something up I'm real quick to throw it across the street. Neighbors know what I'm talkin about.
|
![]() |
![]() |
![]() |
#173 |
Registered User
Join Date: Nov 2014
Location: Columbiana Ohio
Posts: 1,210
|
Re: Blood Sweat and Tears.. 67 Build Thread
It takes me a while to build myself up to get something like this done.. I have been looking for a better door, but havnt found one.. still gotta do bottoms on both doors too... Once I get to the wiring part, thats where stuff starts flying around the garage...
__________________
"Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 |
![]() |
![]() |
![]() |
#174 |
Registered User
Join Date: Oct 2014
Location: Kitchener, Ontario, Canada
Posts: 3,254
|
Re: Blood Sweat and Tears.. 67 Build Thread
Looks good Poss. Sway bar looks better the way you have it now. Keep it up and before you know it you will be driving it.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually |
![]() |
![]() |
![]() |
#175 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: Blood Sweat and Tears.. 67 Build Thread
Nice work on the door!
I may have gotten one of the first ones out of Rob. Had to wait quite a while for mine. I did have to move it forward for clearance. I set a couple of the cross rails on the frame and then spanned across those with a straight edge. It was a tight squeeze on mine.
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|