68c10/c6

[Drifters]

just an updated picture on the hood!

[Advanced Design]

That came out great.

[hewittca]

This build is insane! Looking forward to watching it progress.

[Drifters]

[68redc10]

Looking good Ron, I saw the blue one at Good Guys, I need to swing by one Saturday and take a closer look at the corvette project. Pics look awaome but I know in person it will look even better.

[Drifters]

Sorry I missed you! I was only there on Friday cruise by we're doing a couple 64 c10s as well!

[Rod Run]

I don't know I have missed this thread up until now, but what a great build you have going on

[bodydropped68]

Originally Posted by Drifters

Attachment 1523234 just an updated picture on the hood!

Man that really came out nice just like the rest of the truck

[Drifters]

Thanks guys! Stay tuned I hope I won't disappoint on this build?

[Drifters]

Im sure I don't have to tell you how many time I've assembled and disassembled this truck? We're doing the final assembly now I just have the front bumer modifications and some odds and ends! I've got over 300 hrs in the bed alone.

[Drifters]

I'm finishing up the recessed marker lights I don't have an extra Amber lens so red it is!

[Drifters]

I'm a fan of the 67-68 moldings and since this truck was a base model I had to make provisions! I have a good set of mock up moldings.

[mooseknuckles]

nice work on the hood...

[Drifters]

Thanks!

[Advanced Design]

The moldings will set off the truck really well.

[Drifters]

Thanks Doug I thought the same thing! Some trucks look good with out moldings I myself think the 67-68 moldings look really good they break up the side of the truck! Ron

[Drifters]

I finishing up some details on the bed... I took a header panel and modified it to fill in the inside of the tailgate area!

[Drifters]

I thought I'd modify the front bumper so we filled the bolt holes and narrowed it 3/4" on each side!

[jjzepplin]

Fantastic work! You should have been on the original design team!

[Rod Run]

Originally Posted by Drifters

I thought I'd modify the front bumper so we filled the bolt holes and narrowed it 3/4" on each side! Attachment 1527209

was that pretty straight forward? Just cut out a section and did everything line right back up?

[Drifters]

Thanks jjzepplin I've always thought that these trucks just needed a little tweaking haha! Rod Run take a piece of 3/4 tape run it straight up from top to bottom about 1 inch to the outside of the outermost bolt hole and and cut along the outside of each side of the tape and the pieces will line up perfectly for welding! Ron

[Rod Run]

Originally Posted by Drifters

Thanks jjzepplin I've always thought that these trucks just needed a little tweaking haha! Rod Run take a piece of 3/4 tape run it straight up from top to bottom about 1 inch to the outside of the outermost bolt hole and and cut along the outside of each side of the tape and the pieces will line up perfectly for welding! Ron

Thanks. I was always thinking it might, but I just wasn't 100% sure.

Right after I finish shaving my roof rails, that will be next. Actually, I probably do it while working on my rails, because that crap gets tedious

[Drifters]

I hear you bud hang in there you'll be stocked when your done!

[Drifters]

its been a while so I wanted to share a picture of my two 68's the Chevys getting tore apart for body work and the GMC we shortened and it'll stay patina!

[Drifters]