67 cheby's Dropmember build thread (CLOUD 9) - Page 73 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

babyblueoval · 07-28-2011, 01:34 AM

Quote:

Originally Posted by 67cheby

oh...and babyblu that blazer is CLEAN !!! bout time you started !!

All right Mike, this is the last update for at least a couple weeks. I'll have my own thread by then.

Body Off
[IMG]

[/IMG]

4x4 chassis
[IMG]

[/IMG]

4x4 next to 2x4 so we can figure out where to shorten and move body mounts to
[IMG]

[/IMG]

68 TT · 07-28-2011, 02:39 AM

Tubs look great. Nice to see the finished product in your truck.

**67cheby** · 07-28-2011, 10:19 AM

Babyblue....you know me to well !! LOL , yep he is right !!

**67cheby** · 07-28-2011, 10:20 AM

WOW...nice update!!

watahyahknow · 07-28-2011, 11:25 AM

i wonder if it would be simpler to just look wish bodymounts are the same between the 4x4 and the 2 wheeldrive , take off al the other mounts screw those where they belong on the tub , mount the tub on the 2 wheel chassis using the ones in the right position to center the tub crawl underneat and drill/centerpunch/draw the new holes for the mountingpoints that wherent at the right place should be more foolproof than try to measure the distances

babyblueoval · 07-28-2011, 11:56 AM

If the Blazer tub weighed, oh, about 300+lbs less or if it was on a lift, that is exactly what we would do. But my friend has been doing this stuff for years and is very confident that it's gonna be easy. When it comes time to actually start cutting, we'll measure everything about 30 times and make sure there is no way it could be wrong and go from there.
The the fun stuff begins - Porterbuilt C4 Dropmember, LS1/4L80e - fun fun fun.

68 TT · 07-28-2011, 12:14 PM

Quote:

Originally Posted by watahyahknow

i wonder if it would be simpler to just look wish bodymounts are the same between the 4x4 and the 2 wheeldrive , take off al the other mounts screw those where they belong on the tub , mount the tub on the 2 wheel chassis using the ones in the right position to center the tub crawl underneat and drill/centerpunch/draw the new holes for the mountingpoints that wherent at the right place should be more foolproof than try to measure the distances

The only real difference I found was that the rear cab mount bracket was 1" lower on the frame with the 4x4 & C20/C30 parts vs the C10 parts. Otherwise they were identical.

The front measured about 0.1" lower on the 4x4 parts too but that could just be production variances between the 67 & 69 parts I was working with. They both shared the same six mounting point holes though so I swapped them out just to be sure.

The Blazer mounts may be a totally different animal though. I haven't compared them side by side with the truck pieces and it has been ten years since I owned a 67-72 Blazer so it isn't fresh in my mind either.

watahyahknow · 07-28-2011, 03:42 PM

oh thats verry eazy to fix find two 1 inch high hockeypucks dril a hole in the middle and mount those with the rubbers on that spot and hey presto fixed
good to know that its so simple to put the tub on a different chassis

belowme51 · 07-28-2011, 04:44 PM

ummmm.. I would like to test fit a set please

**67cheby** · 07-28-2011, 04:59 PM

there is a smaalllllll test fitting FEE..

67c10rustbuket · 08-01-2011, 10:21 PM

Congrats mike looks great ! glad you got the production going ! PM me for my address for my sponsorship set ...... now go get that truck painted .

**67cheby** · 08-10-2011, 04:32 PM

LOL.....will do if you dont get a set by tomorrow ....call me the second Tuesday of next week and we will see what we can do !!

72BlckButy · 08-11-2011, 07:36 PM

Any updates?

**67cheby** · 08-11-2011, 10:33 PM

unfortunately...NO..all of my money , time and effort has been poored into SLOSH TUBZ hopefully just a couple more months and they will take off, currently having a few manufacturing hold ups !!! but it is coming around, i guess this kind of thing just takes a little more time and patience than i had thought

jtp67-72 · 08-11-2011, 11:03 PM

And I'm looking at a set of 13" wide trailer fenders on ebay...........I'm so impatient...........just sayin..........lol...........jim

**67cheby** · 08-12-2011, 09:28 AM

I am trying.....getting very fustrated with the manufacturing company one delay after another !!

jtp67-72 · 08-12-2011, 10:24 AM

Just pickin--they will be worth the wait------sent u a pm............jim

68 TT · 08-12-2011, 11:13 AM

Quote:

Originally Posted by 67cheby

unfortunately...NO..all of my money , time and effort has been poored into SLOSH TUBZ hopefully just a couple more months and they will take off, currently having a few manufacturing hold ups !!! but it is coming around, i guess this kind of thing just takes a little more time and patience than i had thought

Sorry to hear you are having mfg delays. I run into them all the time and it sucks.

**67cheby** · 08-12-2011, 11:17 AM

the deal is the company built a 3 piece mold to produce these fenders with well the time it takes to make them with a 3 piece setup is to long so they want to build another set of molds differently to speed up there production time !! all of this slows me down and i need to be selling these trying to RE-COUP some MONEY !!!

68 TT · 08-12-2011, 11:23 AM

Quote:

Originally Posted by 67cheby

the deal is the company built a 3 piece mold to produce these fenders with well the time it takes to make them with a 3 piece setup is to long so they want to build another set of molds differently to speed up there production time !! all of this slows me down and i need to be selling these trying to RE-COUP some MONEY !!!

Tell them they need to be producing products with the molds they have that you paid for. They can use the old molds while they are making the new molds to speed things up on their production process.

You shouldn't have to pay them any more money for their choice to change to mold configuration either.

**67cheby** · 08-12-2011, 11:34 AM

yes you are correct... i wont pay them extra for that !!

**67cheby** · 08-13-2011, 09:26 AM

i know none of you are going to believe me but.....next week i will be working on my truck again, getting the cab, doors ,fenders and grill ready to put in epoxy prime !! not a ton of progress but it will be progress !!

VA72C10 · 08-13-2011, 09:30 AM

cool!!!

es67chevy · 08-13-2011, 11:16 AM

Quote:

Originally Posted by 67cheby

i know none of you are going to believe me but.....next week i will be working on my truck again, getting the cab, doors ,fenders and grill ready to put in epoxy prime !! not a ton of progress but it will be progress !!

Yay!!! If you are out and about today, come over to Gravette for the car show. Truck will be in it.

**67cheby** · 08-13-2011, 11:30 AM

come to Jay Oklahoma , tonight is JAY CRUISE NIGHT ....it is a blast car show/ cruise/ legal burnout night, packs the little town out tons of fun !!

07-28-2011, 02:39 AM	#1802
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: 67 cheby's Dropmember build thread Tubs look great. Nice to see the finished product in your truck. __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

07-28-2011, 10:19 AM	#1803
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread Babyblue....you know me to well !! LOL , yep he is right !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-28-2011, 10:20 AM	#1804
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread WOW...nice update!! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-28-2011, 11:25 AM	#1805
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 67 cheby's Dropmember build thread i wonder if it would be simpler to just look wish bodymounts are the same between the 4x4 and the 2 wheeldrive , take off al the other mounts screw those where they belong on the tub , mount the tub on the 2 wheel chassis using the ones in the right position to center the tub crawl underneat and drill/centerpunch/draw the new holes for the mountingpoints that wherent at the right place should be more foolproof than try to measure the distances __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

07-28-2011, 11:56 AM	#1806
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: 67 cheby's Dropmember build thread If the Blazer tub weighed, oh, about 300+lbs less or if it was on a lift, that is exactly what we would do. But my friend has been doing this stuff for years and is very confident that it's gonna be easy. When it comes time to actually start cutting, we'll measure everything about 30 times and make sure there is no way it could be wrong and go from there. The the fun stuff begins - Porterbuilt C4 Dropmember, LS1/4L80e - fun fun fun. __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver

07-28-2011, 03:42 PM	#1808
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 67 cheby's Dropmember build thread oh thats verry eazy to fix find two 1 inch high hockeypucks dril a hole in the middle and mount those with the rubbers on that spot and hey presto fixed good to know that its so simple to put the tub on a different chassis __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

07-28-2011, 04:44 PM	#1809
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: 67 cheby's Dropmember build thread ummmm.. I would like to test fit a set please

07-28-2011, 04:59 PM	#1810
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread there is a smaalllllll test fitting FEE.. __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-01-2011, 10:21 PM	#1811
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: 67 cheby's Dropmember build thread Congrats mike looks great ! glad you got the production going ! PM me for my address for my sponsorship set ...... now go get that truck painted . __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

08-10-2011, 04:32 PM	#1812
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread LOL.....will do if you dont get a set by tomorrow ....call me the second Tuesday of next week and we will see what we can do !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-11-2011, 07:36 PM	#1813
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 67 cheby's Dropmember build thread Any updates? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-11-2011, 10:33 PM	#1814
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread unfortunately...NO..all of my money , time and effort has been poored into SLOSH TUBZ hopefully just a couple more months and they will take off, currently having a few manufacturing hold ups !!! but it is coming around, i guess this kind of thing just takes a little more time and patience than i had thought __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-11-2011, 11:03 PM	#1815
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: 67 cheby's Dropmember build thread And I'm looking at a set of 13" wide trailer fenders on ebay...........I'm so impatient...........just sayin..........lol...........jim

08-12-2011, 09:28 AM	#1816
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread I am trying.....getting very fustrated with the manufacturing company one delay after another !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-12-2011, 10:24 AM	#1817
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: 67 cheby's Dropmember build thread Just pickin--they will be worth the wait------sent u a pm............jim



Register or Log In To remove these advertisements.

08-12-2011, 11:17 AM	#1819
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread the deal is the company built a 3 piece mold to produce these fenders with well the time it takes to make them with a 3 piece setup is to long so they want to build another set of molds differently to speed up there production time !! all of this slows me down and i need to be selling these trying to RE-COUP some MONEY !!! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-12-2011, 11:34 AM	#1821
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread yes you are correct... i wont pay them extra for that !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-13-2011, 09:26 AM	#1822
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread i know none of you are going to believe me but.....next week i will be working on my truck again, getting the cab, doors ,fenders and grill ready to put in epoxy prime !! not a ton of progress but it will be progress !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

08-13-2011, 09:30 AM	#1823
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 67 cheby's Dropmember build thread cool!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-13-2011, 11:30 AM	#1825
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread come to Jay Oklahoma , tonight is JAY CRUISE NIGHT ....it is a blast car show/ cruise/ legal burnout night, packs the little town out tons of fun !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.