What did you do to your truck today part III - Page 73 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jbgroby · 11-27-2015, 06:43 PM

Got the new heater hoses, core and cut off valve installed today. One more this finished.

blown240 · 11-27-2015, 07:45 PM

I went over some rough train tracks today and my exhaust hanger broke. I found a broken lightbulb on the side of the road and used the filament to wire up my exhaust....

Time to put some bailing wire in my toolbox...

TJ's Chevy · 11-28-2015, 09:20 PM

I made a redneck fuel pump block off plate for my 305 V6 and got my 64 GMC head lights working properly. Now for some night time cruising.

forestb · 11-28-2015, 10:17 PM

visited my truck at the painter today.

mjh1965 · 11-29-2015, 04:28 PM

Well with the end of the road trip it's now down to the real work .

With all the front new and back together it's time to finish the rear . In an earlier post, I showed the rear axel in a lovely shade of yellow . After Rian had come over and helped me lift it into the garage , I got on with getting it all painted . That yellow had to go

The before picture of how it looked in the summer when I removed it

Sanded ready for paint

All painted ready to go back on

Back in the truck

I just need to sort out the rear brakes and get the rear drums painted . Then I can get her back on the wheels

jbgroby · 11-29-2015, 07:09 PM

Finally mounted the optional passenger side sun visor.

blown240 · 11-29-2015, 07:15 PM

Quote:

Originally Posted by TJ's Chevy

I made a redneck fuel pump block off plate for my 305 V6 and got my 64 GMC head lights working properly. Now for some night time cruising.

Needs more washers.

Jimal · 11-29-2015, 08:54 PM

Adjusted my brakes (so many spider nests) and installed a fuel pressure regulator to adjust the flooding issues I was having with my Edelbrock carb setup. The truck has never run better.

**Chevy Fleetside** · 11-30-2015, 12:47 AM

Quote:

Originally Posted by mjh1965

Well with the end of the road trip it's now down to the real work .

With all the front new and back together it's time to finish the rear . In an earlier post, I showed the rear axel in a lovely shade of yellow . After Rian had come over and helped me lift it into the garage , I got on with getting it all painted . That yellow had to go

The before picture of how it looked in the summer when I removed it

.

Now I know what to use my sons skateboards for.

TJ's Chevy · 11-30-2015, 12:49 AM

Quote:

Originally Posted by blown240

Needs more washers.

LOL! I'll be fixing that soon. haha

RANDY COX · 11-30-2015, 04:42 PM

I just looked at mine today...

jbgroby · 11-30-2015, 05:35 PM

I do that a lot....

pimpston65 · 11-30-2015, 06:13 PM

Quote:

Originally Posted by jbgroby

Got the new heater hoses, core and cut off valve installed today. One more this finished.

where did you get the shutoff vavle? i need one for my burbans backseat floor heater...

dwcardfan · 11-30-2015, 06:49 PM

Finished wiring headlights. And bolted the bumper on.

jbgroby · 11-30-2015, 10:37 PM

Quote:

Originally Posted by pimpston65

where did you get the shutoff vavle? I need one for my burbans backseat floor heater...

napa, $8.00

schpeen · 11-30-2015, 10:51 PM

drove on the beach!

schpeen · 11-30-2015, 10:54 PM

Daytona Beach for the Turkey Rod Run

**chevy2tom** · 11-30-2015, 10:55 PM

Searched my local craigslist & found a accuair e level kit (5 gal tank, 400c pump,)2 months old for $900
God I love craigslist lol

akaupp · 11-30-2015, 10:58 PM

Picked up another steel wheel for the c10. Just need to find one more, then I can get rid of the awful aluminum wheels.

65Gregg · 11-30-2015, 11:47 PM

Put on a new power steering pump.

Turtleman · 12-01-2015, 10:37 AM

Quote:

Originally Posted by dwcardfan

Finished wiring headlights. And bolted the bumper on.

Real Nice,, very clean!

pimpston65 · 12-02-2015, 04:24 PM

finally gutted everything, then took it to my sandblaster. every other part was dropped off yesterday, jezz its alot of parts!!!

1966shortwide · 12-02-2015, 04:41 PM

Quote:

Originally Posted by jbgroby

Got the new heater hoses, core and cut off valve installed today. One more this finished.

You probably better put the reinforcement plate around those hose's or it might bust the tube 's where they are soldered.

dwcardfan · 12-02-2015, 07:57 PM

Finished exhaust and had frontend aligned.

TJ's Chevy · 12-02-2015, 09:19 PM

Quote:

Originally Posted by dwcardfan

Finished exhaust and had frontend aligned.

11-27-2015, 06:43 PM	#1801
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: What did you do to your truck today part III Got the new heater hoses, core and cut off valve installed today. One more this finished. Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829

11-27-2015, 07:45 PM	#1802
blown240 Registered User Join Date: Jan 2011 Location: CA Posts: 772	Re: What did you do to your truck today part III I went over some rough train tracks today and my exhaust hanger broke. I found a broken lightbulb on the side of the road and used the filament to wire up my exhaust.... Time to put some bailing wire in my toolbox... __________________ '61 Panel - Helms Bakery Truck - Daily Driver - FOR SALE

11-28-2015, 09:20 PM	#1803
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today part III I made a redneck fuel pump block off plate for my 305 V6 and got my 64 GMC head lights working properly. Now for some night time cruising. Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

11-28-2015, 10:17 PM	#1804
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: What did you do to your truck today part III visited my truck at the painter today. Attached Images

11-29-2015, 04:28 PM	#1805
mjh1965 Registered User Join Date: Sep 2013 Location: Kent England Posts: 1,025	Re: What did you do to your truck today part III Well with the end of the road trip it's now down to the real work . With all the front new and back together it's time to finish the rear . In an earlier post, I showed the rear axel in a lovely shade of yellow . After Rian had come over and helped me lift it into the garage , I got on with getting it all painted . That yellow had to go The before picture of how it looked in the summer when I removed it Sanded ready for paint All painted ready to go back on Back in the truck I just need to sort out the rear brakes and get the rear drums painted . Then I can get her back on the wheels __________________ FINALLY PUTTING IT BACK TOGETHER AT LONG LAST MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=611614

11-29-2015, 07:09 PM	#1806
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: What did you do to your truck today part III Finally mounted the optional passenger side sun visor. Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829

11-29-2015, 08:54 PM	#1808
Jimal Registered User Join Date: Jun 2014 Location: Connecticut Posts: 521	Re: What did you do to your truck today part III Adjusted my brakes (so many spider nests) and installed a fuel pressure regulator to adjust the flooding issues I was having with my Edelbrock carb setup. The truck has never run better.

11-30-2015, 04:42 PM	#1811
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: What did you do to your truck today part III I just looked at mine today... __________________ 1964 BBC 402 4x4

11-30-2015, 05:35 PM	#1812
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: What did you do to your truck today part III I do that a lot.... __________________ http://s1299.photobucket.com/user/jb...23904108567829

11-30-2015, 06:49 PM	#1814
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Re: What did you do to your truck today part III Finished wiring headlights. And bolted the bumper on. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217

11-30-2015, 10:51 PM	#1816
schpeen Registered User Join Date: Jun 2014 Location: fort lauderdale, florida Posts: 511	Re: What did you do to your truck today part III drove on the beach! Attached Images

11-30-2015, 10:54 PM	#1817
schpeen Registered User Join Date: Jun 2014 Location: fort lauderdale, florida Posts: 511	Re: What did you do to your truck today part III Daytona Beach for the Turkey Rod Run Attached Images

11-30-2015, 10:55 PM	#1818
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: What did you do to your truck today part III Searched my local craigslist & found a accuair e level kit (5 gal tank, 400c pump,)2 months old for $900 God I love craigslist lol

11-30-2015, 10:58 PM	#1819
akaupp Registered User Join Date: Jan 2013 Location: West Point, UT Posts: 235	Re: What did you do to your truck today part III Picked up another steel wheel for the c10. Just need to find one more, then I can get rid of the awful aluminum wheels. __________________ Aaron 1964 K10 1964 C10 1965 Suburban 2005 Yukon

11-30-2015, 11:47 PM	#1820
65Gregg Registered User Join Date: Jul 2006 Location: Willis, Texas Posts: 754	Re: What did you do to your truck today part III Put on a new power steering pump. __________________ 65Gregg Blue long bed White TBSS 61 Impala “The two most important days in your life are the day you are born and the day you find out why.” Mark Twain



Register or Log In To remove these advertisements.

12-02-2015, 04:24 PM	#1822
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: What did you do to your truck today part III finally gutted everything, then took it to my sandblaster. every other part was dropped off yesterday, jezz its alot of parts!!! Attached Images

12-02-2015, 07:57 PM	#1824
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Re: What did you do to your truck today part III Finished exhaust and had frontend aligned. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.