Project "What was I Thinking" 68 SWB - Page 76 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bennett68C10 · 03-22-2014, 08:42 AM

Quote:

Originally Posted by mx289

I agree with you there keith.

Hope to do a hydroboost in my c10 soon.

Thanks Tom, I have been wanting to give it a try and since a lot of modern vehicles run Hydroboost I figured it should work nicely on my old truck

Quote:

Originally Posted by 67ctener

Please post details and specs on your hydroboost set up when you get going on it. I've been kicking around the idea also between manual/hydroboost

No problem buddy, might be a while before I get to the actual install though, just collecting parts now. If you have a big cam in your big block like I have your going to be in the same situation as me, too much cam and not enough vacuum for brakes

**Hart_Rod** · 03-22-2014, 09:19 AM

Quote:

Originally Posted by Bucks68

Dang you Nate Porter!!

Must be my MILD case of OCD...

Mild????.....

.....

Bennett68C10 · 03-24-2014, 08:13 PM

I haven't got as much done over the past couple of weeks as I would have liked but I did manage to get the bed on and laid out on the garage floor

sduckworth13 · 03-24-2014, 08:14 PM

That looks awesome Keith!

Bennett68C10 · 03-24-2014, 08:18 PM

Quote:

Originally Posted by sduckworth13

That looks awesome Keith!

Thanks Scott, I also managed to clean all the dust off my engine and put my 454 logo plates on the valve covers.

sduckworth13 · 03-24-2014, 08:25 PM

Great job Keith! Your engine looks super !

Rochlow · 03-24-2014, 08:48 PM

Looks great!

SeTx67 · 03-24-2014, 08:57 PM

Looks great

jeh · 03-24-2014, 09:01 PM

Looks awesome Keith, can't wait to see it with some shiny paint! You're going to have a nice truck when your done.

mx289 · 03-24-2014, 09:33 PM

Very nice !

Looks great Keith.
Its goona look great red.
Soon.

Bennett68C10 · 03-24-2014, 10:15 PM

Quote:

Originally Posted by sduckworth13

Great job Keith! Your engine looks super !

Thanks Scott, I can't wait for the rest of the truck too look as good as the engine does

Quote:

Originally Posted by Rochlow

Looks great!

Quote:

Originally Posted by SeTx67

Looks great

Thanks guys, I'm pretty happy with it. In the photo I haven't clearanced the bedsides for the tires yet. She is tight and I could never drive it like that. I couldn't believe it would even go down when I tried it. To my surprise she squeezed down and rested the rear on the bumpstops. I will tackle that next, just need to do some figuring before cutting.

Quote:

Originally Posted by jeh

Looks awesome Keith, can't wait to see it with some shiny paint! You're going to have a nice truck when your done.

Thanks Jason just hoping my paint turns out half as nice as yours, but since it will be my first paint job I highly doubt it

Quote:

Originally Posted by mx289

Very nice !

Looks great Keith.
Its goona look great red.
Soon.

Thanks Tom, I still have a ton of work to do before I can think about painting it. I haven't even started the bodywork on the cab yet and I have to have to raise my bed floor and figure out what to do with my wheel tubs. Seems never ending

Rusbuilt · 03-24-2014, 11:45 PM

That laid out shot looks freakin sweet!!

Bennett68C10 · 03-25-2014, 05:47 AM

Quote:

Originally Posted by Rusbuilt

That laid out shot looks freakin sweet!!

Thanks Rus, she turned out exactly the way I wanted her too

suspect · 03-25-2014, 07:53 AM

Lookin awesome! I hope I can get my body lines lined up like that.

mcbassin · 03-25-2014, 08:22 AM

Your truck looks great!

Bhelton · 03-25-2014, 08:52 AM

Saw it on IG, looks awesome Keith!

SeTx67 · 03-25-2014, 09:28 AM

Those wheels are really growing on me. I can't stop looking at them

67ctener · 03-25-2014, 09:31 AM

Perfection. Lines and stance are simply perfect.

jlsanborn · 03-25-2014, 10:47 AM

Looks soo killer! You've gotta be jonseing to get that thing painted. There should be a photo of that fat motor on every page!

knomadd · 03-25-2014, 12:01 PM

That looks good!!! Your engine cleaned up nicely too! I bet it feels great to see it as a truck again.

**superflysteiny** · 03-25-2014, 12:54 PM

oh ya that is sick

Bennett68C10 · 03-25-2014, 04:45 PM

Quote:

Originally Posted by suspect

Lookin awesome! I hope I can get my body lines lined up like that.

Quote:

Originally Posted by mcbassin

Your truck looks great!

Quote:

Originally Posted by Bhelton

Saw it on IG, looks awesome Keith!

Quote:

Originally Posted by SeTx67

Those wheels are really growing on me. I can't stop looking at them

Quote:

Originally Posted by 67ctener

Perfection. Lines and stance are simply perfect.

Quote:

Originally Posted by jlsanborn

Looks soo killer! You've gotta be jonseing to get that thing painted. There should be a photo of that fat motor on every page!

Quote:

Originally Posted by knomadd

That looks good!!! Your engine cleaned up nicely too! I bet it feels great to see it as a truck again.

Quote:

Originally Posted by superflysteiny

oh ya that is sick

Thanks everybody for the all the really nice comments, it really means a lot to me. I absolutely love the stance of the truck, my hats off to the crew at Porterbuilt for bringing these high quality products to the market so a guy like me without any fabrication experience can have a truck that lays frame. Now if I could just find somebody to finish the bodywork and paint it for me, I would be set

rwade · 03-25-2014, 11:15 PM

Have you mocked up your steering shaft yet? You have the "touring" drop member right? I'm about to get to that point and if you have some pics and measurements it would be greatly appreciated.

Thanks, Wade

Bennett68C10 · 03-26-2014, 05:45 AM

Quote:

Originally Posted by rwade

Have you mocked up your steering shaft yet? You have the "touring" drop member right? I'm about to get to that point and if you have some pics and measurements it would be greatly appreciated.

Thanks, Wade

Wade I haven't mocked my steering shaft up yet, I was going to do that after I started taking the front end back apart for paint, at least I need the Slosh Tubz out of the way so I have room to work. I do have the Touring Dropmember up front, Nate sent me some pics a while back of what the shaft would like like from another customers truck. If you want to pm me your email address and I'll send you over the pics he sent me.

SeTx67 · 03-26-2014, 10:24 AM

After looking at your hood issues I believe mine was made by the same company. The gap is way off on the passenger side and it's high on the drivers side just like yours was. Wanna do mine

03-24-2014, 08:13 PM	#1878
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB I haven't got as much done over the past couple of weeks as I would have liked but I did manage to get the bed on and laid out on the garage floor Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

03-24-2014, 08:14 PM	#1879
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Project "What was I Thinking" 68 SWB That looks awesome Keith! __________________ Scott

03-24-2014, 08:25 PM	#1881
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Project "What was I Thinking" 68 SWB Great job Keith! Your engine looks super ! __________________ Scott

03-24-2014, 08:48 PM	#1882
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project "What was I Thinking" 68 SWB Looks great! __________________ ///Relaxed Atmosphere

03-24-2014, 08:57 PM	#1883
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: Project "What was I Thinking" 68 SWB Looks great

03-24-2014, 09:01 PM	#1884
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Project "What was I Thinking" 68 SWB Looks awesome Keith, can't wait to see it with some shiny paint! You're going to have a nice truck when your done. __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

03-24-2014, 09:33 PM	#1885
mx289 Registered User Join Date: May 2013 Location: wall,nj Posts: 865	Re: Project "What was I Thinking" 68 SWB Very nice ! Looks great Keith. Its goona look great red. Soon. __________________ Tom 71 K2500 71 K5 Jimmy

03-24-2014, 11:45 PM	#1887
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project "What was I Thinking" 68 SWB That laid out shot looks freakin sweet!! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

03-25-2014, 07:53 AM	#1889
suspect Registered User Join Date: Jul 2011 Location: oklahoma city Posts: 692	Re: Project "What was I Thinking" 68 SWB Lookin awesome! I hope I can get my body lines lined up like that. __________________ Daniel 68 C10 Build http://67-72chevytrucks.com/vboard/s...d.php?t=503594 Romans 10:13 Everyone who calls on the name of the Lord will be saved.

03-25-2014, 08:22 AM	#1890
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "What was I Thinking" 68 SWB Your truck looks great! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

03-25-2014, 08:52 AM	#1891
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Re: Project "What was I Thinking" 68 SWB Saw it on IG, looks awesome Keith!

03-25-2014, 09:28 AM	#1892
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: Project "What was I Thinking" 68 SWB Those wheels are really growing on me. I can't stop looking at them

03-25-2014, 09:31 AM	#1893
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Project "What was I Thinking" 68 SWB Perfection. Lines and stance are simply perfect.

03-25-2014, 10:47 AM	#1894
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: Project "What was I Thinking" 68 SWB Looks soo killer! You've gotta be jonseing to get that thing painted. There should be a photo of that fat motor on every page! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

03-25-2014, 12:01 PM	#1895
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Project "What was I Thinking" 68 SWB That looks good!!! Your engine cleaned up nicely too! I bet it feels great to see it as a truck again. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)



Register or Log In To remove these advertisements.

03-25-2014, 12:54 PM	#1896
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Project "What was I Thinking" 68 SWB oh ya that is sick __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-25-2014, 11:15 PM	#1898
rwade Registered User Join Date: Apr 2010 Location: Louisiana Posts: 970	Re: Project "What was I Thinking" 68 SWB Have you mocked up your steering shaft yet? You have the "touring" drop member right? I'm about to get to that point and if you have some pics and measurements it would be greatly appreciated. Thanks, Wade

03-26-2014, 10:24 AM	#1900
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: Project "What was I Thinking" 68 SWB After looking at your hood issues I believe mine was made by the same company. The gap is way off on the passenger side and it's high on the drivers side just like yours was. Wanna do mine

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.